Mail archive
alpine-aports

[alpine-aports] [PATCH 1/3] main/zabbix: Update zabbix_server.conf

From: Kevin Daudt <me_at_ikke.info>
Date: Tue, 5 May 2015 19:44:14 +0000

Use the one provided with the official 2.4.3 source:

See https://raw.githubusercontent.com/zabbix/zabbix/2.4.3/conf/zabbix_server.conf
---
 main/zabbix/zabbix_server.conf | 689 ++++++++++++++++++++++++++++++++---------
 1 file changed, 548 insertions(+), 141 deletions(-)
diff --git a/main/zabbix/zabbix_server.conf b/main/zabbix/zabbix_server.conf
index 39c12ef..b48c0c9 100644
--- a/main/zabbix/zabbix_server.conf
+++ b/main/zabbix/zabbix_server.conf
_at_@ -1,155 +1,562 @@
-# This is config file for ZABBIX server process
-# To get more information about ZABBIX, 
-# go http://www.zabbix.com
+# This is a configuration file for Zabbix Server process
+# To get more information about Zabbix,
+# visit http://www.zabbix.com
 
 ############ GENERAL PARAMETERS #################
 
-# This defines unique NodeID in distributed setup,
-# Default value 0 (standalone server)
-# This parameter must be between 0 and 999
-#NodeID=0
-
-# Number of pre-forked instances of pollers
-# Default value is 5
-# This parameter must be between 0 and 255
-#StartPollers=5
-
-# Number of pre-forked instances of IPMI pollers
-# Default value is 0
-# This parameter must be between 0 and 255
-#StartIPMIPollers=0
-
-# Number of pre-forked instances of pollers for unreachable hosts
-# Default value is 1
-# This parameter must be between 0 and 255
-#StartPollersUnreachable=1
-
-# Number of pre-forked instances of trappers
-# Default value is 5
-# This parameter must be between 0 and 255
-#StartTrappers=5
-
-# Number of pre-forked instances of ICMP pingers
-# Default value is 1
-# This parameter must be between 0 and 255
-#StartPingers=1
-
-# Number of pre-forked instances of discoverers
-# Default value is 1
-# This parameter must be between 0 and 255
-#StartDiscoverers=1
-
-# Number of pre-forked instances of HTTP pollers
-# Default value is 1
-# This parameter must be between 0 and 255
-#StartHTTPPollers=1
-
-# Listen port for trapper. Default port number is 10051. This parameter 
-# must be between 1024 and 32767
-
-#ListenPort=10051
-
-# Source IP address for outgouing connections
-#SourceIP=
-
-# Listen interface for trapper. Trapper will listen all network interfaces
-# if this parameter is missing.
-
-#ListenIP=127.0.0.1
-
-# How often ZABBIX will perform housekeeping procedure
-# (in hours)
-# Default value is 1 hour
-# Housekeeping is removing unnecessary information from
-# tables history, alert, and alarms
-# This parameter must be between 1 and 24
-
-#HousekeepingFrequency=1
-
-# How often ZABBIX will try to send unsent alerts
-# (in seconds)
-# Default value is 30 seconds
-SenderFrequency=30
-
-# Uncomment this line to disable housekeeping procedure
-#DisableHousekeeping=1
-
-# Specifies debug level
-# 0 - debug is not created
-# 1 - critical information
-# 2 - error information
-# 3 - warnings (default)
-# 4 - for debugging (produces lots of information)
-
-DebugLevel=3
-
-# Specifies how long we wait for agent response (in sec)
-# Must be between 1 and 30 
-Timeout=5
-
-# Specifies how many seconds trapper may spend processing new data
-# Must be between 1 and 30 
-#TrapperTimeout=5
-
-# After how many seconds of unreachability treat a host as unavailable
-#UnreachablePeriod=45
-
-# How ofter check host for availability during the unreachability period
-#UnavailableDelay=15
-
-# How ofter check host for availability during the unavailability period
-#UnavailableDelay=60
-
-# Name of PID file
-
-PidFile=/var/run/zabbix/zabbix_server.pid
-
-# Name of log file
-# If not set, syslog is used
+### Option: ListenPort
+#	Listen port for trapper.
+#
+# Mandatory: no
+# Range: 1024-32767
+# Default:
+# ListenPort=10051
+
+### Option: SourceIP
+#	Source IP address for outgoing connections.
+#
+# Mandatory: no
+# Default:
+# SourceIP=
+
+### Option: LogFile
+#	Name of log file.
+#	If not set, syslog is used.
+#
+# Mandatory: no
+# Default:
+# LogFile=
 
 LogFile=/var/log/zabbix/zabbix_server.log
 
-# Maximum size of log file in MB. Set to 0 to disable automatic log rotation.
-LogFileSize=2
-
-# Location for custom alert scripts
-AlertScriptsPath=/home/zabbix/bin/
-
-# Location of external scripts
-#ExternalScripts=/etc/zabbix/externalscripts
+### Option: LogFileSize
+#	Maximum size of log file in MB.
+#	0 - disable automatic log rotation.
+#
+# Mandatory: no
+# Range: 0-1024
+# Default:
+# LogFileSize=1
+
+### Option: DebugLevel
+#	Specifies debug level
+#	0 - basic information about starting and stopping of Zabbix processes
+#	1 - critical information
+#	2 - error information
+#	3 - warnings
+#	4 - for debugging (produces lots of information)
+#
+# Mandatory: no
+# Range: 0-4
+# Default:
+# DebugLevel=3
+
+### Option: PidFile
+#	Name of PID file.
+#
+# Mandatory: no
+# Default:
+# PidFile=/tmp/zabbix_server.pid
 
-# Location of fping. Default is /usr/sbin/fping
-# Make sure that fping binary has root permissions and SUID flag set
-#FpingLocation=/usr/sbin/fping
-
-# Location of fping6. Default is /usr/sbin/fping6
-# Make sure that fping binary has root permissions and SUID flag set
-#Fping6Location=/usr/sbin/fping6
-
-# Temporary directory. Default is /tmp
-#TmpDir=/tmp
-
-# Frequency of ICMP pings (item keys 'icmpping' and 'icmppingsec'). Defauls is 60 seconds.
-#PingerFrequency=60
-
-# Database host name
-# Default is localhost
+PidFile=/var/run/zabbix/zabbix_server.pid
 
-#DBHost=localhost
+### Option: DBHost
+#	Database host name.
+#	If set to localhost, socket is used for MySQL.
+#	If set to empty string, socket is used for PostgreSQL.
+#
+# Mandatory: no
+# Default:
+# DBHost=localhost
+
+### Option: DBName
+#	Database name.
+#	For SQLite3 path to database file must be provided. DBUser and DBPassword are ignored.
+#
+# Mandatory: yes
+# Default:
+# DBName=
 
-# Database name
-# SQLite3 note: path to database file must be provided. DBUser and DBPassword are ignored.
 DBName=zabbix
 
-# Database user
+### Option: DBSchema
+#	Schema name. Used for IBM DB2 and PostgreSQL.
+#
+# Mandatory: no
+# Default:
+# DBSchema=
 
-DBUser=root
-
-# Database password
-# Comment this line if no password used
+### Option: DBUser
+#	Database user. Ignored for SQLite.
+#
+# Mandatory: no
+# Default:
+# DBUser=
 
-#DBPassword=<password>
-
-# Connect to MySQL using Unix socket?
+DBUser=root
 
-#DBSocket=/tmp/mysql.sock
+### Option: DBPassword
+#	Database password. Ignored for SQLite.
+#	Comment this line if no password is used.
+#
+# Mandatory: no
+# Default:
+# DBPassword=
+
+### Option: DBSocket
+#	Path to MySQL socket.
+#
+# Mandatory: no
+# Default:
+# DBSocket=/tmp/mysql.sock
+
+### Option: DBPort
+#	Database port when not using local socket. Ignored for SQLite.
+#
+# Mandatory: no
+# Range: 1024-65535
+# Default (for MySQL):
+# DBPort=3306
+
+############ ADVANCED PARAMETERS ################
+
+### Option: StartPollers
+#	Number of pre-forked instances of pollers.
+#
+# Mandatory: no
+# Range: 0-1000
+# Default:
+# StartPollers=5
+
+### Option: StartIPMIPollers
+#	Number of pre-forked instances of IPMI pollers.
+#
+# Mandatory: no
+# Range: 0-1000
+# Default:
+# StartIPMIPollers=0
+
+### Option: StartPollersUnreachable
+#	Number of pre-forked instances of pollers for unreachable hosts (including IPMI and Java).
+#	At least one poller for unreachable hosts must be running if regular, IPMI or Java pollers
+#	are started.
+#
+# Mandatory: no
+# Range: 0-1000
+# Default:
+# StartPollersUnreachable=1
+
+### Option: StartTrappers
+#	Number of pre-forked instances of trappers.
+#	Trappers accept incoming connections from Zabbix sender, active agents and active proxies.
+#	At least one trapper process must be running to display server availability and view queue
+#	in the frontend.
+#
+# Mandatory: no
+# Range: 0-1000
+# Default:
+# StartTrappers=5
+
+### Option: StartPingers
+#	Number of pre-forked instances of ICMP pingers.
+#
+# Mandatory: no
+# Range: 0-1000
+# Default:
+# StartPingers=1
+
+### Option: StartDiscoverers
+#	Number of pre-forked instances of discoverers.
+#
+# Mandatory: no
+# Range: 0-250
+# Default:
+# StartDiscoverers=1
+
+### Option: StartHTTPPollers
+#	Number of pre-forked instances of HTTP pollers.
+#
+# Mandatory: no
+# Range: 0-1000
+# Default:
+# StartHTTPPollers=1
+
+### Option: StartTimers
+#	Number of pre-forked instances of timers.
+#	Timers process time-based trigger functions and maintenance periods.
+#	Only the first timer process handles the maintenance periods.
+#
+# Mandatory: no
+# Range: 1-1000
+# Default:
+# StartTimers=1
+
+### Option: JavaGateway
+#	IP address (or hostname) of Zabbix Java gateway.
+#	Only required if Java pollers are started.
+#
+# Mandatory: no
+# Default:
+# JavaGateway=
+
+### Option: JavaGatewayPort
+#	Port that Zabbix Java gateway listens on.
+#
+# Mandatory: no
+# Range: 1024-32767
+# Default:
+# JavaGatewayPort=10052
+
+### Option: StartJavaPollers
+#	Number of pre-forked instances of Java pollers.
+#
+# Mandatory: no
+# Range: 0-1000
+# Default:
+# StartJavaPollers=0
+
+### Option: StartVMwareCollectors
+#	Number of pre-forked vmware collector instances.
+#
+# Mandatory: no
+# Range: 0-250
+# Default:
+# StartVMwareCollectors=0
+
+### Option: VMwareFrequency
+#	How often Zabbix will connect to VMware service to obtain a new data.
+#
+# Mandatory: no
+# Range: 10-86400
+# Default:
+# VMwareFrequency=60
+
+### Option: VMwareCacheSize
+#	Size of VMware cache, in bytes.
+#	Shared memory size for storing VMware data.
+#	Only used if VMware collectors are started.
+#
+# Mandatory: no
+# Range: 256K-2G
+# Default:
+# VMwareCacheSize=8M
+
+### Option: SNMPTrapperFile
+#	Temporary file used for passing data from SNMP trap daemon to the server.
+#	Must be the same as in zabbix_trap_receiver.pl or SNMPTT configuration file.
+#
+# Mandatory: no
+# Default:
+# SNMPTrapperFile=/tmp/zabbix_traps.tmp
+
+### Option: StartSNMPTrapper
+#	If 1, SNMP trapper process is started.
+#
+# Mandatory: no
+# Range: 0-1
+# Default:
+# StartSNMPTrapper=0
+
+### Option: ListenIP
+#	List of comma delimited IP addresses that the trapper should listen on.
+#	Trapper will listen on all network interfaces if this parameter is missing.
+#
+# Mandatory: no
+# Default:
+# ListenIP=0.0.0.0
+
+# ListenIP=127.0.0.1
+
+### Option: HousekeepingFrequency
+#	How often Zabbix will perform housekeeping procedure (in hours).
+#	Housekeeping is removing outdated information from the database.
+#	To prevent Housekeeper from being overloaded, no more than 4 times HousekeepingFrequency
+#	hours of outdated information are deleted in one housekeeping cycle, for each item.
+#	To lower load on server startup housekeeping is postponed for 30 minutes after server start.
+#
+# Mandatory: no
+# Range: 1-24
+# Default:
+# HousekeepingFrequency=1
+
+### Option: MaxHousekeeperDelete
+#	The table "housekeeper" contains "tasks" for housekeeping procedure in the format:
+#	[housekeeperid], [tablename], [field], [value].
+#	No more than 'MaxHousekeeperDelete' rows (corresponding to [tablename], [field], [value])
+#	will be deleted per one task in one housekeeping cycle.
+#	SQLite3 does not use this parameter, deletes all corresponding rows without a limit.
+#	If set to 0 then no limit is used at all. In this case you must know what you are doing!
+#
+# Mandatory: no
+# Range: 0-1000000
+# Default:
+# MaxHousekeeperDelete=500
+
+### Option: SenderFrequency
+#	How often Zabbix will try to send unsent alerts (in seconds).
+#
+# Mandatory: no
+# Range: 5-3600
+# Default:
+# SenderFrequency=30
+
+### Option: CacheSize
+#	Size of configuration cache, in bytes.
+#	Shared memory size for storing host, item and trigger data.
+#
+# Mandatory: no
+# Range: 128K-8G
+# Default:
+# CacheSize=8M
+
+### Option: CacheUpdateFrequency
+#	How often Zabbix will perform update of configuration cache, in seconds.
+#
+# Mandatory: no
+# Range: 1-3600
+# Default:
+# CacheUpdateFrequency=60
+
+### Option: StartDBSyncers
+#	Number of pre-forked instances of DB Syncers
+#
+# Mandatory: no
+# Range: 1-100
+# Default:
+# StartDBSyncers=4
+
+### Option: HistoryCacheSize
+#	Size of history cache, in bytes.
+#	Shared memory size for storing history data.
+#
+# Mandatory: no
+# Range: 128K-2G
+# Default:
+# HistoryCacheSize=8M
+
+### Option: TrendCacheSize
+#	Size of trend cache, in bytes.
+#	Shared memory size for storing trends data.
+#
+# Mandatory: no
+# Range: 128K-2G
+# Default:
+# TrendCacheSize=4M
+
+### Option: HistoryTextCacheSize
+#	Size of text history cache, in bytes.
+#	Shared memory size for storing character, text or log history data.
+#
+# Mandatory: no
+# Range: 128K-2G
+# Default:
+# HistoryTextCacheSize=16M
+
+### Option: ValueCacheSize
+#	Size of history value cache, in bytes.
+#	Shared memory size for caching item history data requests.
+#	Setting to 0 disables value cache.
+#
+# Mandatory: no
+# Range: 0,128K-64G
+# Default:
+# ValueCacheSize=8M
+
+### Option: Timeout
+#	Specifies how long we wait for agent, SNMP device or external check (in seconds).
+#
+# Mandatory: no
+# Range: 1-30
+# Default:
+# Timeout=3
+
+### Option: TrapperTimeout
+#	Specifies how many seconds trapper may spend processing new data.
+#
+# Mandatory: no
+# Range: 1-300
+# Default:
+# TrapperTimeout=300
+
+### Option: UnreachablePeriod
+#	After how many seconds of unreachability treat a host as unavailable.
+#
+# Mandatory: no
+# Range: 1-3600
+# Default:
+# UnreachablePeriod=45
+
+### Option: UnavailableDelay
+#	How often host is checked for availability during the unavailability period, in seconds.
+#
+# Mandatory: no
+# Range: 1-3600
+# Default:
+# UnavailableDelay=60
+
+### Option: UnreachableDelay
+#	How often host is checked for availability during the unreachability period, in seconds.
+#
+# Mandatory: no
+# Range: 1-3600
+# Default:
+# UnreachableDelay=15
+
+### Option: AlertScriptsPath
+#	Full path to location of custom alert scripts.
+#	Default depends on compilation options.
+#
+# Mandatory: no
+# Default:
+# AlertScriptsPath=${datadir}/zabbix/alertscripts
+
+### Option: ExternalScripts
+#	Full path to location of external scripts.
+#	Default depends on compilation options.
+#
+# Mandatory: no
+# Default:
+# ExternalScripts=${datadir}/zabbix/externalscripts
+
+### Option: FpingLocation
+#	Location of fping.
+#	Make sure that fping binary has root ownership and SUID flag set.
+#
+# Mandatory: no
+# Default:
+# FpingLocation=/usr/sbin/fping
+
+### Option: Fping6Location
+#	Location of fping6.
+#	Make sure that fping6 binary has root ownership and SUID flag set.
+#	Make empty if your fping utility is capable to process IPv6 addresses.
+#
+# Mandatory: no
+# Default:
+# Fping6Location=/usr/sbin/fping6
+
+### Option: SSHKeyLocation
+#	Location of public and private keys for SSH checks and actions.
+#
+# Mandatory: no
+# Default:
+# SSHKeyLocation=
+
+### Option: LogSlowQueries
+#	How long a database query may take before being logged (in milliseconds).
+#	Only works if DebugLevel set to 3 or 4.
+#	0 - don't log slow queries.
+#
+# Mandatory: no
+# Range: 1-3600000
+# Default:
+# LogSlowQueries=0
+
+### Option: TmpDir
+#	Temporary directory.
+#
+# Mandatory: no
+# Default:
+# TmpDir=/tmp
+
+### Option: StartProxyPollers
+#	Number of pre-forked instances of pollers for passive proxies.
+#
+# Mandatory: no
+# Range: 0-250
+# Default:
+# StartProxyPollers=1
+
+### Option: ProxyConfigFrequency
+#	How often Zabbix Server sends configuration data to a Zabbix Proxy in seconds.
+#	This parameter is used only for proxies in the passive mode.
+#
+# Mandatory: no
+# Range: 1-3600*24*7
+# Default:
+# ProxyConfigFrequency=3600
+
+### Option: ProxyDataFrequency
+#	How often Zabbix Server requests history data from a Zabbix Proxy in seconds.
+#	This parameter is used only for proxies in the passive mode.
+#
+# Mandatory: no
+# Range: 1-3600
+# Default:
+# ProxyDataFrequency=1
+
+### Option: AllowRoot
+#	Allow the server to run as 'root'. If disabled and the server is started by 'root', the server
+#	will try to switch to the user specified by the User configuration option instead.
+#	Has no effect if started under a regular user.
+#	0 - do not allow
+#	1 - allow
+#
+# Mandatory: no
+# Default:
+# AllowRoot=0
+
+### Option: User
+#	Drop privileges to a specific, existing user on the system.
+#	Only has effect if run as 'root' and AllowRoot is disabled.
+#
+# Mandatory: no
+# Default:
+# User=zabbix
+
+### Option: Include
+#	You may include individual files or all files in a directory in the configuration file.
+#	Installing Zabbix will create include directory in /usr/local/etc, unless modified during the compile time.
+#
+# Mandatory: no
+# Default:
+# Include=
+
+# Include=/usr/local/etc/zabbix_server.general.conf
+# Include=/usr/local/etc/zabbix_server.conf.d/
+# Include=/usr/local/etc/zabbix_server.conf.d/*.conf
+
+### Option: SSLCertLocation
+#	Location of SSL client certificates.
+#	This parameter is used only in web monitoring.
+#
+# Mandatory: no
+# Default:
+# SSLCertLocation=${datadir}/zabbix/ssl/certs
+
+### Option: SSLKeyLocation
+#	Location of private keys for SSL client certificates.
+#	This parameter is used only in web monitoring.
+#
+# Mandatory: no
+# Default:
+# SSLKeyLocation=${datadir}/zabbix/ssl/keys
+
+### Option: SSLCALocation
+#	Override the location of certificate authority (CA) files for SSL server certificate verification.
+#	If not set, system-wide directory will be used.
+#	This parameter is used only in web monitoring.
+#
+# Mandatory: no
+# Default:
+# SSLCALocation=
+
+####### LOADABLE MODULES #######
+
+### Option: LoadModulePath
+#	Full path to location of server modules.
+#	Default depends on compilation options.
+#
+# Mandatory: no
+# Default:
+# LoadModulePath=${libdir}/modules
+
+### Option: LoadModule
+#	Module to load at server startup. Modules are used to extend functionality of the server.
+#	Format: LoadModule=<module.so>
+#	The modules must be located in directory specified by LoadModulePath.
+#	It is allowed to include multiple LoadModule parameters.
+#
+# Mandatory: no
+# Default:
+# LoadModule=
-- 
2.2.1
---
Unsubscribe:  alpine-aports+unsubscribe_at_lists.alpinelinux.org
Help:         alpine-aports+help_at_lists.alpinelinux.org
---
Received on Tue May 05 2015 - 19:44:14 GMT