---
testing/next3-grsec/APKBUILD | 86 ++++++++++++++++++++++++++++++++++++++++
testing/next3-vserver/APKBUILD | 86 ++++++++++++++++++++++++++++++++++++++++
2 files changed, 172 insertions(+), 0 deletions(-)
create mode 100644 testing/next3-grsec/APKBUILD
create mode 100644 testing/next3-vserver/APKBUILD
diff --git a/testing/next3-grsec/APKBUILD b/testing/next3-grsec/APKBUILD
new file mode 100644
index 0000000..7f70088
--- /dev/null
+++ b/testing/next3-grsec/APKBUILD
@@ -0,0 +1,86 @@
+# Contributor: Matt Smith <mcs@darkregion.net>
+# Maintainer: Matt Smith <mcs@darkregion.net>
+# Based off of aports/main/dahdi-linux-grsec/APKBUILD by Timo Teras
+
+_flavor=grsec
+
+# source the kernel version
+if [ -f ../../main/linux-${_flavor}/APKBUILD ]; then
+ . ../../main/linux-${_flavor}/APKBUILD
+fi
+
+_kernelver="$pkgver-r$pkgrel"
+_abi_release=${pkgver}-${_flavor}
+_kpkgrel=$pkgrel
+_realname=next3
+
+pkgname=${_realname}-${_flavor}
+pkgver=$pkgver
+# when changing _next3ver we *must* bump _mypkgrel
+_next3ver=1.0.13-rc6
+_mypkgrel=0
+pkgrel=$(( $_kpkgrel + $_mypkgrel ))
+pkgdesc="NEXT3(TM) is a flavor of the widely used Ext3 file system with built-in support for snapshots."
+url="http://www.ctera.com/home/next3.html"
+arch="all"
+license="GPL"
+depends="linux-${_flavor}=${_kernelver}"
+makedepends="linux-${_flavor}-dev=${_kernelver} wget coreutils"
+install=
+subpackages="$pkgname-doc"
+source="http://downloads.sourceforge.net/${_realname}/${_realname}-${_next3ver}.tar.gz"
+
+_builddir="$srcdir"/${_realname}-${_next3ver}
+
+prepare() {
+ cd "$_builddir"
+
+ # modify the Makefile to use install from coreutils
+ sed -ri "s;(install -T);/bin/\1;" Makefile
+
+ # modify the Makefile, add necessary options to mkfs.next3
+ # during make test (these are also necessary for normal use)
+ # See the CHANGELOG for Dec 13, 2010.
+ sed -ri "s;(mkfs.next3) (test.img);\1 -O exclude_inode,has_snapshot \2;" Makefile
+
+ # modify the Makefile, change INSTALL_DIR
+ sed -ri "s;^(INSTALL_DIR=).*$;\1"$pkgdir"/lib/modules/${_abi_release}/fs/next3;" Makefile
+
+ # modify the Makefile, update the depmod line to only run when root
+ # and run it against the $_abi_release kernel version
+ sed -ri "s;(/sbin/depmod -a);\[ \`id -u\` = 0 \] \&\& \1 ${_abi_release} || :;" Makefile
+
+ # modify the Makefile, remove the modprobe line
+ sed -ri "s;(/sbin/modprobe next3);;" Makefile
+
+ # modify the Makefile, update the install lines for 'make install'
+ sed -ri "s;(install) (.*) (/sbin);\1 -m755 \2 "$pkgdir"\3;" Makefile
+}
+
+build() {
+ cd "$_builddir"
+
+ # Build Next3
+ make KVERS="${_abi_release}" || return 1
+
+ # Test Next3
+ sudo make KVERS="${_abi_release}" test || return 1
+}
+
+package() {
+ cd "$_builddir"
+
+ # Install Next3 into $pkgdir
+ make KVERS="${_abi_release}" install || return 1
+}
+
+doc() {
+ cd "$_builddir"
+
+ mkdir -p "$subpkgdir"/usr/share/doc/next3/
+ for _doc in BUGS CHANGELOG COPYING HOWTO INDEX INSTALL README TODO; do
+ install -Dm644 $_doc "$subpkgdir"/usr/share/doc/next3/$_doc
+ done
+}
+
+md5sums="dacbc80fbeac6347b987fabbab62f22e next3-1.0.13-rc6.tar.gz"
diff --git a/testing/next3-vserver/APKBUILD b/testing/next3-vserver/APKBUILD
new file mode 100644
index 0000000..7ad93b4
--- /dev/null
+++ b/testing/next3-vserver/APKBUILD
@@ -0,0 +1,86 @@
+# Contributor: Matt Smith <mcs@darkregion.net>
+# Maintainer: Matt Smith <mcs@darkregion.net>
+# Based off of aports/main/dahdi-linux-grsec/APKBUILD by Timo Teras
+
+_flavor=vserver
+
+# source the kernel version
+if [ -f ../../main/linux-${_flavor}/APKBUILD ]; then
+ . ../../main/linux-${_flavor}/APKBUILD
+fi
+
+_kernelver="$pkgver-r$pkgrel"
+_abi_release=${pkgver}-${_flavor}
+_kpkgrel=$pkgrel
+_realname=next3
+
+pkgname=${_realname}-${_flavor}
+pkgver=$pkgver
+# when changing _next3ver we *must* bump _mypkgrel
+_next3ver=1.0.13-rc6
+_mypkgrel=0
+pkgrel=$(( $_kpkgrel + $_mypkgrel ))
+pkgdesc="NEXT3(TM) is a flavor of the widely used Ext3 file system with built-in support for snapshots."
+url="http://www.ctera.com/home/next3.html"
+arch="all"
+license="GPL"
+depends="linux-${_flavor}=${_kernelver}"
+makedepends="linux-${_flavor}-dev=${_kernelver} wget coreutils"
+install=
+subpackages="$pkgname-doc"
+source="http://downloads.sourceforge.net/${_realname}/${_realname}-${_next3ver}.tar.gz"
+
+_builddir="$srcdir"/${_realname}-${_next3ver}
+
+prepare() {
+ cd "$_builddir"
+
+ # modify the Makefile to use install from coreutils
+ sed -ri "s;(install -T);/bin/\1;" Makefile
+
+ # modify the Makefile, add necessary options to mkfs.next3
+ # during make test (these are also necessary for normal use)
+ # See the CHANGELOG for Dec 13, 2010.
+ sed -ri "s;(mkfs.next3) (test.img);\1 -O exclude_inode,has_snapshot \2;" Makefile
+
+ # modify the Makefile, change INSTALL_DIR
+ sed -ri "s;^(INSTALL_DIR=).*$;\1"$pkgdir"/lib/modules/${_abi_release}/fs/next3;" Makefile
+
+ # modify the Makefile, update the depmod line to only run when root
+ # and run it against the $_abi_release kernel version
+ sed -ri "s;(/sbin/depmod -a);\[ \`id -u\` = 0 \] \&\& \1 ${_abi_release} || :;" Makefile
+
+ # modify the Makefile, remove the modprobe line
+ sed -ri "s;(/sbin/modprobe next3);;" Makefile
+
+ # modify the Makefile, update the install lines for 'make install'
+ sed -ri "s;(install) (.*) (/sbin);\1 -m755 \2 "$pkgdir"\3;" Makefile
+}
+
+build() {
+ cd "$_builddir"
+
+ # Build Next3
+ make KVERS="${_abi_release}" || return 1
+
+ # Test Next3
+ sudo make KVERS="${_abi_release}" test || return 1
+}
+
+package() {
+ cd "$_builddir"
+
+ # Install Next3 into $pkgdir
+ make KVERS="${_abi_release}" install || return 1
+}
+
+doc() {
+ cd "$_builddir"
+
+ mkdir -p "$subpkgdir"/usr/share/doc/next3/
+ for _doc in BUGS CHANGELOG COPYING HOWTO INDEX INSTALL README TODO; do
+ install -Dm644 $_doc "$subpkgdir"/usr/share/doc/next3/$_doc
+ done
+}
+
+md5sums="dacbc80fbeac6347b987fabbab62f22e next3-1.0.13-rc6.tar.gz"
--
1.7.3.3
---
Unsubscribe: alpine-devel+unsubscribe@lists.alpinelinux.org
Help: alpine-devel+help@lists.alpinelinux.org
---
On Tue, 2010-12-21 at 21:05 -0600, Matt Smith wrote:
Please include the pkgdesc and url in commit message so you quickly can
get info on what the new aport is about.
For example:
http://git.alpinelinux.org/cgit/aports/commit/?id=7269013bc00062d01ca5bb2ad4fd55cf5bcd9887
This is not a show-stopper but is nice.
> ---
> testing/next3-grsec/APKBUILD | 86 ++++++++++++++++++++++++++++++++++++++++
> testing/next3-vserver/APKBUILD | 86 ++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 172 insertions(+), 0 deletions(-)
> create mode 100644 testing/next3-grsec/APKBUILD
> create mode 100644 testing/next3-vserver/APKBUILD
>
> diff --git a/testing/next3-grsec/APKBUILD b/testing/next3-grsec/APKBUILD
> new file mode 100644
> index 0000000..7f70088
> --- /dev/null
> +++ b/testing/next3-grsec/APKBUILD
> @@ -0,0 +1,86 @@
> +# Contributor: Matt Smith <mcs@darkregion.net>
> +# Maintainer: Matt Smith <mcs@darkregion.net>
> +# Based off of aports/main/dahdi-linux-grsec/APKBUILD by Timo Teras
> +
> +_flavor=grsec
> +
> +# source the kernel version
> +if [ -f ../../main/linux-${_flavor}/APKBUILD ]; then
> + . ../../main/linux-${_flavor}/APKBUILD
> +fi
> +
> +_kernelver="$pkgver-r$pkgrel"
> +_abi_release=${pkgver}-${_flavor}
> +_kpkgrel=$pkgrel
> +_realname=next3
> +
> +pkgname=${_realname}-${_flavor}
> +pkgver=$pkgver
> +# when changing _next3ver we *must* bump _mypkgrel
> +_next3ver=1.0.13-rc6
> +_mypkgrel=0
> +pkgrel=$(( $_kpkgrel + $_mypkgrel ))
> +pkgdesc="NEXT3(TM) is a flavor of the widely used Ext3 file system with built-in support for snapshots."
> +url="http://www.ctera.com/home/next3.html"
> +arch="all"
> +license="GPL"
> +depends="linux-${_flavor}=${_kernelver}"
> +makedepends="linux-${_flavor}-dev=${_kernelver} wget coreutils"
> +install=
> +subpackages="$pkgname-doc"
> +source="http://downloads.sourceforge.net/${_realname}/${_realname}-${_next3ver}.tar.gz"
> +
> +_builddir="$srcdir"/${_realname}-${_next3ver}
> +
> +prepare() {
> + cd "$_builddir"
> +
> + # modify the Makefile to use install from coreutils
> + sed -ri "s;(install -T);/bin/\1;" Makefile
when coreutils is installed, will it not automatically use coreutils'
install? thats a bug in bb/coreutils then.
> + # modify the Makefile, add necessary options to mkfs.next3
> + # during make test (these are also necessary for normal use)
> + # See the CHANGELOG for Dec 13, 2010.
> + sed -ri "s;(mkfs.next3) (test.img);\1 -O exclude_inode,has_snapshot \2;" Makefile
see below about 'make test'
> + # modify the Makefile, change INSTALL_DIR
> + sed -ri "s;^(INSTALL_DIR=).*$;\1"$pkgdir"/lib/modules/${_abi_release}/fs/next3;" Makefile
can you do 'make install INSTALL_DIR=......' without modifying the
Makefile?
> +
> + # modify the Makefile, update the depmod line to only run when root
> + # and run it against the $_abi_release kernel version
> + sed -ri "s;(/sbin/depmod -a);\[ \`id -u\` = 0 \] \&\& \1 ${_abi_release} || :;" Makefile
How about patching the Makefile to something like:
DEPMOD = /sbin/depmod
...
$(DEPMOD) -a
and then do: 'make DEPMOD=:'
I suppose checking if run as root works too.
This should be fixed upstream btw...
> +
> + # modify the Makefile, remove the modprobe line
> + sed -ri "s;(/sbin/modprobe next3);;" Makefile
> +
> + # modify the Makefile, update the install lines for 'make install'
> + sed -ri "s;(install) (.*) (/sbin);\1 -m755 \2 "$pkgdir"\3;" Makefile
> +}
> +
> +build() {
> + cd "$_builddir"
> +
> + # Build Next3
> + make KVERS="${_abi_release}" || return 1
> +
> + # Test Next3
> + sudo make KVERS="${_abi_release}" test || return 1
this is a no-no. Do not ever run sudo from your APKBUILD. Do not ever
touch anything outside the build dir itself.
> +}
> +
> +package() {
> + cd "$_builddir"
> +
> + # Install Next3 into $pkgdir
> + make KVERS="${_abi_release}" install || return 1
> +}
> +
> +doc() {
> + cd "$_builddir"
> +
> + mkdir -p "$subpkgdir"/usr/share/doc/next3/
> + for _doc in BUGS CHANGELOG COPYING HOWTO INDEX INSTALL README TODO; do
> + install -Dm644 $_doc "$subpkgdir"/usr/share/doc/next3/$_doc
> + done
> +}
> +
> +md5sums="dacbc80fbeac6347b987fabbab62f22e next3-1.0.13-rc6.tar.gz"
> diff --git a/testing/next3-vserver/APKBUILD b/testing/next3-vserver/APKBUILD
The above applies to the next3-vserver too.
Can you fix the things I mentioned and send a new patch?
Thanks!
-nc
---
Unsubscribe: alpine-devel+unsubscribe@lists.alpinelinux.org
Help: alpine-devel+help@lists.alpinelinux.org
---