Mail archive
alpine-devel

[alpine-devel] [PATCH] mkinitfs - Modified init script for network boot

From: Hugo Landau <hlandau_at_devever.net>
Date: Thu, 11 Apr 2013 13:54:16 +0100

This supports network boot over NFS providing the correct kernel modules
and udhcpc hook script are incorporated to the initrd (tweak mkinitfs
config).

The init script can now obtain an IP using udhcpc if you specify
ip=dhcp. This replaces kernel-level DHCP.

Downloading an ovl via http now works also. Use ovl_dev=http://...
You can now specify a repository at a different location than at the
alpine_dev. Use alpine_repo=http://nl.alpinelinux.org/...
By default, or if alpine_repo=auto, a repository will be searched for
on alpine_dev as usual. alpine_dev can now be an NFS share using
   alpine_dev=nfs:IP:EXPORT
The NFS share is currently necessarily mounted using -o nolock.

To boot over PXE you might use
   ip=dhcp alpine_dev=nfs:1.2.3.4:/...
     ovl_dev=http://.../foo.apkovl.tar.gz

You can use {MAC} and {UUID} in opk_dev. They will be substituted.
Ensure you put the value of opk_dev in quotes, e.g.
   opk_dev="http://.../?mac={MAC}"

Example file and driver list for PXE boot:
   kernel/drivers/net/ethernet/*
   kernel/net/packet/af_packet.ko
   kernel/fs/nfs/*
   kernel/fs/lockd/*
   kernel/net/sunrpc/*
   usr/share/udhcpc/default.script

---
  initramfs-init.in | 166 
++++++++++++++++++++++++++++++++++++++++++++++++------
  1 file changed, 148 insertions(+), 18 deletions(-)
diff --git a/initramfs-init.in b/initramfs-init.in
index 9bce5f8..f06bc21 100755
--- a/initramfs-init.in
+++ b/initramfs-init.in
_at_@ -191,7 +191,7 @@ setup_inittab_console(){
  		esac
  		shift
-                # skip "current console" from beign added to inittab
+		# skip "current console" from being added to inittab
  		[ "$tty" = "tty0" ] && continue
  		# do nothing if inittab already have the tty set up
_at_@ -240,6 +240,79 @@ start_lvm() {
  		lvm vgchange --ignorelockingfailure -a y >/dev/null 2>&1
  }
+# determine the default interface to use if ip=dhcp is set
+# uses the first "eth" interface.
+ip_choose_if() {
+	for x in /sys/class/net/eth*; do
+		[ -e "$x" ] && echo ${x##*/} && return
+	done
+}
+
+# ip_set <device> <ip> <netmask> <gateway-ip>
+ip_set() {
+	ifconfig "$1" "$2" netmask "$3" || return $?
+	if [ -n "$4" ]; then
+		ip route add 0.0.0.0/0 via "$4" dev "$1" || return $?
+	fi
+}
+
+# if "ip=dhcp" is specified on the command line, we obtain an IP address
+# using udhcpc. we do this now and not by enabling kernel-mode DHCP because
+# kernel-model DHCP appears to require that network drivers be built into
+# the kernel rather than as modules. At this point all applicable modules
+# in the initrd should have been loaded.
+#
+# You need af_packet.ko available as well modules for your Ethernet card.
+#
+# Valid syntaxes:
+#   ip=client-ip:server-ip:gw-ip:netmask:hostname:device:autoconf
+#   ip=dhcp
+#   "server-ip" and "hostname" are not supported here.
+#
+configure_ip() {
+	[ -n "$KOPT_ip" ] || return
+	OIFS=$IFS
+	IFS=':'
+	eval set -- $KOPT_ip
+	IFS=$OIFS
+
+	local client_ip="$1"
+	local gw_ip="$3"
+	local netmask="$4"
+	local device="$6"
+	local autoconf="$7"
+	[ "$client_ip" == "off" -o "$client_ip" == "none" ] && return
+	if [ "$client_ip" == "dhcp" ]; then
+		autoconf="dhcp"
+		client_ip=
+	fi
+
+	[ -n "$device" ] || device=$(ip_choose_if)
+	[ -n "$device" ] || return
+
+	if [ "$autoconf" == "dhcp" ]; then
+		if [ ! -e /usr/share/udhcpc/default.script ]; then
+			echo "ERROR: DHCP requested but not present in initrd"
+			return
+		fi
+		# automatic configuration
+		ebegin "Obtaining IP via DHCP ($device)..."
+		ifconfig $device 0.0.0.0
+		udhcpc -i $device -f -q
+		eend $?
+	else
+		# manual configuration
+		[ -n "$client_ip" -a -n "$netmask" ] || return
+		ebegin "Setting IP ($device)..."
+		ip_set "$device" "$client_ip" "$netmask" "$gw_ip"
+		eend $?
+	fi
+	MAC_ADDRESS=$(cat /sys/class/net/$device/address)
+	MACHINE_UUID=$(cat /sys/class/dmi/id/product_uuid)
+	OVL_DEV="${OVL_DEV/{MAC\}/$MAC_ADDRESS}"
+	OVL_DEV="${OVL_DEV/{UUID\}/$MACHINE_UUID}"
+}
+
  # resolve an uuid or symlink to the real device
  resolve_dev() {
  	case "$1" in
_at_@ -275,8 +348,12 @@ find_fs_type() {
  # find the dirs under ALPINE_MNT that are boot repositories
  find_boot_repositories() {
-	find $ALPINE_MNT -name .boot_repository -type f -maxdepth 3 \
-		| sed 's:/.boot_repository$::'
+	if [ -n "$ALPINE_REPO" ]; then
+		echo "$ALPINE_REPO"
+	else
+		find $ALPINE_MNT -name .boot_repository -type f -maxdepth 3 \
+			| sed 's:/.boot_repository$::'
+	fi
  }
  # gotta start from somewhere :)
_at_@ -288,7 +365,7 @@ eval set -- `cat /proc/cmdline`
  myopts="alpine_dev autodetect autoraid chart cryptroot cryptdm debug_init
  	dma init_args keep_apk_new modules ovl_dev pkgs quiet root_size root
-	usbdelay"
+	usbdelay ip alpine_repo"
  for opt; do
  	case "$opt" in
_at_@ -341,21 +418,47 @@ ALPINE_DEV_FS=${KOPT_alpine_dev##*:}
  if [ "$ALPINE_DEV_FS" = "$ALPINE_DEV" ]; then
  	unset ALPINE_DEV_FS
  fi
+
+# /dev/blah:ext3
+# http://.../blah.apkovl.tar.gz
  if [ -n "$KOPT_ovl_dev" ] ; then
  	OVL_DEV=${KOPT_ovl_dev%%:*}
  	OVL_DEV_FS=${KOPT_ovl_dev##*:}
  	if [ "$OVL_DEV_FS" = "$OVL_DEV" ]; then
  		unset OVL_DEV_FS
  	fi
+
  fi
  case "$ALPINE_DEV" in
  	UUID=*|LABEL=*) ;;
+	nfs)
+		# nfs:IP:EXPORT
+		ALPINE_DEV_FS="$ALPINE_DEV"
+		ALPINE_DEV="${KOPT_alpine_dev:4}"
+		ALPINE_DEV_IS_NETWORK=y
+		;;
  	*) ALPINE_DEV=/dev/$ALPINE_DEV ;;
  esac
+case "$OVL_DEV" in
+	http|https)
+		OVL_DEV_FS="$OVL_DEV"
+		OVL_DEV="$KOPT_ovl_dev"
+		OVL_DEV_IS_NETWORK=y
+		;;
+	*) ;;
+esac
+
+# The following values are supported:
+#   alpine_repo=auto         -- default, search for .boot_repository
+#   alpine_repo=http://...   -- network repository
+ALPINE_REPO=${KOPT_alpine_repo}
+[ "$ALPINE_REPO" == "auto" ] && ALPINE_REPO=
+
  # look for standard mountpoint locations
  ALPINE_MNT=$(find_mnt $ALPINE_DEV /etc/fstab)
+[ -z "$ALPINE_MNT" -a -n "$ALPINE_DEV_IS_NETWORK" ] && 
ALPINE_MNT=/media/alpine_dev
  [ -z "$ALPINE_MNT" ] && ALPINE_MNT=/media/${ALPINE_DEV##*/}
  # hide kernel messages
_at_@ -429,6 +532,9 @@ if [ -z "${ALPINE_DEV##*usb*}" ]; then
  	wait_usb
  fi
+# IP. This shouldn't be needed if root= is set.
+configure_ip
+
  # incase we have alpine_dev on raid device...
  start_raid
  start_cryptsetup
_at_@ -445,6 +551,7 @@ fi
  if [ -n "$ALPINE_DEV_FS" ]; then
  	mount_opts="-t $ALPINE_DEV_FS"
+	[ "$ALPINE_DEV_FS" == "nfs" ] && mount_opts="$mount_opts -o nolock"
  fi
  retry_mount -o ro $mount_opts $ALPINE_DEV $ALPINE_MNT >/dev/null 2>&1
_at_@ -463,18 +570,26 @@ if [ -n "$KOPT_root_size" ]; then
  fi
  mount -t tmpfs $root_opts tmpfs $sysroot
-if [ -n "$OVL_DEV" ]; then
-	mkdir -p /media/$OVL_DEV
-	unset mount_opts
-	if [ -n "$OVL_DEV_FS" ]; then
-		mount_opts="-t $OVL_DEV_FS"
-	fi
-	
-	retry_mount -o ro $mount_opts /dev/$OVL_DEV /media/$OVL_DEV \
-		>/dev/null 2>&1
-	ovl=$(find_ovl /media/$OVL_DEV)
+OVL_MNT=/media/$OVL_DEV
+[ -n "$OVL_DEV_IS_NETWORK" ] && OVL_MNT=/media/ovl_dev
+
+if [ -n "$OVL_DEV_IS_NETWORK" ]; then
+	ovl=/tmp/boot.apkovl.tar.gz
+	wget -O "$ovl" "$OVL_DEV"
  else
-	find_ovl_dev
+	if [ -n "$OVL_DEV" ]; then
+		mkdir -p /media/$OVL_DEV
+		unset mount_opts
+		if [ -n "$OVL_DEV_FS" ]; then
+			mount_opts="-t $OVL_DEV_FS"
+		fi
+		
+		retry_mount -o ro $mount_opts /dev/$OVL_DEV /media/$OVL_DEV \
+			>/dev/null 2>&1
+		ovl=$(find_ovl /media/$OVL_DEV)
+	else
+		find_ovl_dev
+	fi
  fi
  if ! [ -f "$ovl" ]; then
  	ovl=$(find_ovl $ALPINE_MNT)
_at_@ -509,7 +624,8 @@ if [ -f "$ovl" ]; then
  			-e 's|:/etc/init.d/rcK|:/sbin/rc shutdown|' \
  			"$sysroot"/etc/inittab
  	fi
-else
+fi
+if [ -f "$sysroot/etc/.default_boot_services" -o ! -f "$ovl" ]; then
  	# add some boot services by default
  	rc_add devfs sysinit
  	rc_add dmesg sysinit
_at_@ -525,6 +641,8 @@ else
  	rc_add mount-ro shutdown
  	rc_add killprocs shutdown
  	rc_add savecache shutdown
+
+	rm -f "$sysroot/etc/.default_boot_services"
  fi
  if [ -f $sysroot/etc/fstab ]; then
_at_@ -570,7 +688,16 @@ ebegin "Installing packages to root filesystem"
  if [ "$KOPT_chart" = yes ]; then
  	pkgs="$pkgs acct"
  fi
-apkflags="--initdb --progress --force --no-network"
+
+apkflags="--initdb --progress --force"
+if [ -z "$ALPINE_REPO" ]; then
+	apkflags="$apkflags --no-network"
+else
+	# HTTP: convince apk to behave
+	apk add --root $sysroot $repo_opt $apkflags
+	apk update --root $sysroot $repo_opt
+fi
+
  if [ -n "$KOPT_quiet" ]; then
  	apkflags="$apkflags --quiet"
  fi
_at_@ -614,11 +741,14 @@ fi
  setup_inittab_console $CONSOLE
  # copy alpine release info
-if ! [ -f "$sysroot"/etc/alpine-release ]; then
+if ! [ -f "$sysroot"/etc/alpine-release ] && [ -f 
$ALPINE_MNT/.alpine-release ]; then
  	cp $ALPINE_MNT/.alpine-release $sysroot/
  	ln -sf /.alpine-release $sysroot/etc/alpine-release
  fi
+! [ -f "$sysroot"/etc/resolv.conf ] && [ -f /etc/resolv.conf ] && \
+  cp /etc/resolv.conf "$sysroot"/etc
+
  # setup bootchart for switch_root
  chart_init=""
  if [ "$KOPT_chart" = yes ]; then
-- 
1.8.0




---
Unsubscribe:  alpine-devel+unsubscribe_at_lists.alpinelinux.org
Help:         alpine-devel+help_at_lists.alpinelinux.org
---
Received on Thu Apr 11 2013 - 13:54:16 UTC