Mail archive
alpine-devel

Re: [alpine-devel] [3.1.0] Critical Issues with: [PATCH] main/ppp: upgrade to 2.4.7, split to modules

From: Natanael Copa <ncopa_at_alpinelinux.org>
Date: Thu, 11 Dec 2014 16:15:47 +0100

On Thu, 11 Dec 2014 01:27:33 +0100
Der Tiger <der.tiger.alpine_at_arcor.de> wrote:

> Hi Valery,
>
> Thank you for your update of pppd!
>
> Though, the current ppp* packages are missing the pon/poff utilities,
> which are certainly required by ifup/ifdown to set-up connections.
>
> In order to be able to connect any new Alpine installation to your
> chosen internet service provider, the ISO images of Alpine also need to
> contain _all_ ppp* sub-packages. The latest ISO images only include
> acf-ppp and ppp, which after the splitting of the package no longer have
> PPPoE/ATM/L2TP capability.
> As a consequence of the splitting, any upgrade from previous versions of
> Alpine render the router inoperable, if the router was set-up to connect
> to the internet via a PPPoE channel. This is kind of a dead end, since
> the router isn't able to connect to the internet the missing
> sub-packages can't be added, easily.
>
> What is the intention behind splitting the ppp package, anyway, because
> there isn't much disk space to be gained and all modules are only called
> on request?
>
> I ask you to, please,
>
> Either:
> * Include the pon/poff utilities in the ppp main package
> * and include all sub-packages in all ISO builds
> * and make the upgade script automatically install all sub-packages
> when upgrading from previous versions of Alpine

At a minimum document it in the release notes.

> Or:
> * Re-combine all ppp packages to a single package including pon/poff.
>
> I wonder if splitting the ppp package really was such a great idea. :-/
>
> Regards,
>
> Tiger

yes, we need fix this for 3.1.1

How about we do like this:

move all contents of the current ppp package to a new subpackage called
ppp-common (or maybe 2 pkgs: pppd + ppp-utils). Then all the current
subpackages depends on ppp-common (or pppd if we call it that) and
finally the 'ppp' package serves as empty meta package which pulls in
the subpackages as deps.

That way, upgrades are safe because 'ppp' will pull in everything that
used to be there, while for new installs, you can chose to only install
the specific subpackages you need.

Valery, what do you think about that?

-nc


>
> On 03/12/14 18:45, Valery Kartel wrote:
> > ---
> > main/ppp/APKBUILD | 149 ++++++++++++++------
> > main/ppp/fix-paths.patch | 24 ++++
> > main/ppp/options | 356 -----------------------------------------------
> > main/ppp/plog | 7 -
> > main/ppp/poff | 103 --------------
> > main/ppp/pon | 32 -----
> > main/ppp/pon.1 | 121 ----------------
> > 7 files changed, 131 insertions(+), 661 deletions(-)
> > create mode 100644 main/ppp/fix-paths.patch
> > delete mode 100644 main/ppp/options
> > delete mode 100644 main/ppp/plog
> > delete mode 100644 main/ppp/poff
> > delete mode 100644 main/ppp/pon
> > delete mode 100644 main/ppp/pon.1
> >
> > diff --git a/main/ppp/APKBUILD b/main/ppp/APKBUILD
> > index a8038cf..5302c87 100644
> > --- a/main/ppp/APKBUILD
> > +++ b/main/ppp/APKBUILD
> > _at_@ -1,25 +1,23 @@
> > # Maintainer: Natanael Copa <ncopa_at_alpinelinux.org>
> > pkgname=ppp
> > -pkgver=2.4.6
> > +pkgver=2.4.7
> > pkgrel=0
> > pkgdesc="A daemon which implements the PPP protocol for dial-up networking"
> > url="http://www.samba.org/ppp/"
> > arch="all"
> > license="custom:GPL/BSD"
> > depends=
> > -makedepends="libpcap-dev"
> > -subpackages="$pkgname-dev $pkgname-doc"
> > +makedepends=
> > +subpackages="$pkgname-chat $pkgname-chat-doc:chat_doc
> > + $pkgname-radius $pkgname-radius-doc:radius_doc
> > + $pkgname-atm $pkgname-pppoe $pkgname-l2tp $pkgname-winbind
> > + $pkgname-passprompt $pkgname-passwordfd $pkgname-minconn $pkgname-doc $pkgname-dev"
> > source="ftp://ftp.samba.org/pub/$pkgname/$pkgname-$pkgver.tar.gz
> > defaultroute-metric.3.patch
> > musl-fix-headers.patch
> > -
> > - options
> > - pon
> > - poff
> > - plog
> > - pon.1
> > - ip-up
> > - ip-down"
> > + fix-paths.patch
> > + ip-down
> > + ip-up"
> >
> > _builddir="$srcdir"/$pkgname-$pkgver
> > prepare() {
> > _at_@ -64,45 +62,112 @@ package() {
> > make INSTROOT="$pkgdir" install || return 1
> > install -Dm644 include/net/ppp_defs.h \
> > "$pkgdir"/usr/include/net/ppp_defs.h || return 1
> > -
> > - install -D -m644 "$srcdir"/options "$pkgdir"/etc/ppp/options
> > install -D -m755 "$srcdir"/ip-up "$pkgdir"/etc/ppp/ip-up
> > install -D -m755 "$srcdir"/ip-down "$pkgdir"/etc/ppp/ip-down
> > - install -D -m755 "$srcdir"/pon "$pkgdir"/usr/bin/pon
> > - install -D -m755 "$srcdir"/poff "$pkgdir"/usr/bin/poff
> > - install -D -m755 "$srcdir"/plog "$pkgdir"/usr/sbin/plog
> > + install -D -m644 etc.ppp/options "$pkgdir"/etc/ppp/options
> > install -D -m600 etc.ppp/pap-secrets "$pkgdir"/etc/ppp/pap-secrets
> > install -D -m600 etc.ppp/chap-secrets "$pkgdir"/etc/ppp/chap-secrets
> > - install -D -m644 "$srcdir"/pon.1 "$pkgdir"/usr/share/man/man1/pon.1
> > - mkdir -p "$pkgdir"/etc/ppp/peers
> > + install -D -m644 scripts/pon.1 "$pkgdir"/usr/share/man/man1/pon.1
> > + install -d "$pkgdir"/usr/share/doc/ppp
> > + cp scripts/* "$pkgdir"/usr/share/doc/ppp/
> > + rm "$pkgdir"/usr/share/doc/ppp/pon.1
> > + install -d "$pkgdir"/etc/ppp/peers
> > +}
> > +
> > +atm() {
> > + pkgdesc="pppd plugin to implement PPPoATM protocol"
> > + depends="ppp"
> > + _mv usr/lib/pppd/$pkgver/pppoatm.so 755
> > +}
> > +
> > +minconn() {
> > + pkgdesc="pppd plugin to implement a 'minconnect' option"
> > + depends="ppp"
> > + _mv usr/lib/pppd/$pkgver/minconn.so 755
> > +}
> > +
> > +winbind() {
> > + pkgdesc="WINBIND plugin for pppd"
> > + depends="ppp"
> > + _mv usr/lib/pppd/$pkgver/winbind.so 755
> > +}
> > +
> > +
> > +passprompt() {
> > + pkgdesc="pppd plugin to invoke an external PAP password prompter"
> > + depends="ppp"
> > + _mv usr/lib/pppd/$pkgver/passprompt.so 755
> > +}
> > +
> > +passwordfd() {
> > + pkgdesc="pppd plugin let's you pass the password via a file descriptor"
> > + depends="ppp"
> > + _mv usr/lib/pppd/$pkgver/passwordfd.so 755
> > +}
> > +
> > +chat() {
> > + pkgdesc="a program for automatic ppp session establishment"
> > + _mv usr/sbin/chat 755
> > +}
> > +
> > +chat_doc() {
> > + arch="noarch"
> > + _mv usr/share/man/man8/chat.8 644 doc
> > +}
> > +
> > +l2tp() {
> > + pkgdesc="pppd plugin to implement PPPoL2TP protocol"
> > + depends="ppp"
> > + _mv usr/lib/pppd/$pkgver/openl2tp.so 755
> > + _mv usr/lib/pppd/$pkgver/pppol2tp.so 755
> > +}
> > +
> > +pppoe() {
> > + pkgdesc="pppd plugin for kernel-mode PPPoE on Linux"
> > + depends="ppp"
> > + _mv usr/lib/pppd/$pkgver/rp-pppoe.so 755
> > + _mv usr/sbin/pppoe-discovery 755
> > +}
> > +
> > +radius() {
> > + pkgdesc="RADIUS plugin for pppd"
> > + depends="ppp"
> > + _mv usr/lib/pppd/$pkgver/radius.so 755
> > + _mv usr/lib/pppd/$pkgver/radattr.so 755
> > + _mv usr/lib/pppd/$pkgver/radrealms.so 755
> > + install -d "$subpkgdir"/etc/radiusclient
> > + cp -r "$_builddir"/pppd/plugins/radius/etc/* "$subpkgdir"/etc/radiusclient
> > + mv "$subpkgdir"/etc/radiusclient/radiusclient.conf.in "$subpkgdir"/etc/radiusclient/radiusclient.conf
> > + sed -i "s:_at_pkgsysconfdir@:/etc/radiusclient:g" "$subpkgdir"/etc/radiusclient/radiusclient.conf
> > + sed -i "s:_at_sbindir@:/usr/sbin:g" "$subpkgdir"/etc/radiusclient/radiusclient.conf
> > +}
> > +
> > +radius_doc() {
> > + arch="noarch"
> > + _mv usr/share/man/man8/pppd-radius.8 644 doc
> > + _mv usr/share/man/man8/pppd-radattr.8 644 doc
> > +}
> > +
> > +_mv() {
> > + install -m $2 -D "$pkgdir"/$1 "$subpkgdir"/$1
> > + [ -n $3 ] && gzip -9 "$subpkgdir"/$1
> > + rm "$pkgdir"/$1
> > }
> > -md5sums="3434d2cc9327167a0723aaaa8670083b ppp-2.4.6.tar.gz
> > +md5sums="78818f40e6d33a1d1de68a1551f6595a ppp-2.4.7.tar.gz
> > 5a5c2d1bdca62979d9ed7a5a648e86d1 defaultroute-metric.3.patch
> > 8d2128c74d62a2844491a24794b05a3e musl-fix-headers.patch
> > -9185f645bb433b22a9951d9d12f79c35 options
> > -48c024f73a80c8b69c4def22f86902cc pon
> > -2d811f8470ccdea3b8c4505a438483e9 poff
> > -86cdaf133f7a79fb464f02d83afc7734 plog
> > -44cc662ba9aa61dd9add3ddd4c5ded57 pon.1
> > -fac0c773490371ea673f4be0977a230f ip-up
> > -a88b40b1bf91eb5cca3762b7195e4fe2 ip-down"
> > -sha256sums="1b33181a03962c8a092c055fb9980e9722728a8d98a4bb7ec7acda17c1b1b49d ppp-2.4.6.tar.gz
> > +c8f78e010a776d114d687b1a742ca6bb fix-paths.patch
> > +a88b40b1bf91eb5cca3762b7195e4fe2 ip-down
> > +fac0c773490371ea673f4be0977a230f ip-up"
> > +sha256sums="02e0a3dd3e4799e33103f70ec7df75348c8540966ee7c948e4ed8a42bbccfb30 ppp-2.4.7.tar.gz
> > 1f69c03747ed68eaaaa8b2f0a239e57f167967fc90a6f89d802dcfe77026846f defaultroute-metric.3.patch
> > b136d5366e64a686a3ea24baaaeb4a37c2654c098dd7fcb263caebf9e9281956 musl-fix-headers.patch
> > -9f473800a48bbaec41b465817ae9c4c53d6b0ce865b4298d9353b30707a39605 options
> > -c92e0721c4f53987dd0a02fe7089d0f5a58cdb7bb9f26d1bddc28111406ce6c2 pon
> > -ee1e1e5f164effe49bc7ffab3fbde6efbd46d186c58192913f749257026d75e2 poff
> > -43608081ab9d6a755eb4e6fa2011f88b16b1702745d76bced6d546a7c579b39f plog
> > -9bb35eac78898cdc75184bb70fea11fb2e2889e1e2cadf0b7bb8320d7cae0959 pon.1
> > -7d44e21ed945434c32a385f44c690826f74c3d5ddac353deae8174692d8d1beb ip-up
> > -84f2b44c9f4b8abdbc9cfbfffb669fa19385b80da55f9c292df115189dc62bd6 ip-down"
> > -sha512sums="65d6967ba43cd8b4d3f63f52ff69f6fed964f748fc780dff982629668213c2cd1891671f6f4a0c1c22118a382e282fabdd2328e60a120d9b984d3c17f9355cc6 ppp-2.4.6.tar.gz
> > +b6453eeb32a78d6748b3fc5ef9f21a7862f70f8316c3903097ad63f00497266b fix-paths.patch
> > +84f2b44c9f4b8abdbc9cfbfffb669fa19385b80da55f9c292df115189dc62bd6 ip-down
> > +7d44e21ed945434c32a385f44c690826f74c3d5ddac353deae8174692d8d1beb ip-up"
> > +sha512sums="e34ce24020af6a73e7a26c83c4f73a9c83fa455b7b363794dba27bf01f70368be06bff779777843949bd77f4bc9385d6ad455ea48bf8fff4e0d73cc8fef16ae2 ppp-2.4.7.tar.gz
> > fccc7a6809ae4a617796ccf1d2132de8edb1cc0c71d76a95393585a5970b92be2a54da558702db355c8aea8d37b4dfffc64406129a2b3322f0b10e8f0481f685 defaultroute-metric.3.patch
> > 2f071ea9db15e4abf1bed6cce8130dc81b710a31bfef5fa8f9370c353f845dbc47674b1551b8e040478e5156add6f98d480530206125e8bb308f0f4288d1eec6 musl-fix-headers.patch
> > -cabcaa8d44f0da399326b7f93267d4786b32f69c6fa7a78ab451575a8cc594f2a259406166c874d88ecfc0861b8b4abdb3b653cf1cb00e2f2838ea880962f6ee options
> > -29233c8010f511792c2dcf54ee06ede271994ef029b6b526aeeb17433233ef6b638b96346d81db55c2a6bb25fb07633328415cd3af55dadd78a32b1d45b07dd8 pon
> > -3605ce49bad21473ef5f3ff2421e1ef7687e9267986503deca63ae3a2baa6308e8d031cb1da2f93b5b73dc292206a49c59cea17b80c129272cc975e07e3c6142 poff
> > -f40ab2549c2e05adc018197911c4820187aa5e9920004b0b1d68ebf38688a1fcab1f79966eb73f36237ec84f056ab9e0c05e32cbfd73fdd0c368216cf54741fd plog
> > -c5dc475940a34a2b489279f89d9b428b0e811abb6b22ef53b926784ab39e92981cd1eab79f8ff0c91de618c3bf890701fd7a8138537cdb036f8771e7ca16b5c4 pon.1
> > -8258c95a6b6e8e94d6001b5cd3a99bd3270f29ba0f2e5050a26c8d5f1b67eead8d039e71ce86a784d45e620047b0a2bb14b258d80a9ea62084ba588a4c2e2d84 ip-up
> > -160260bd2a788beaac395eadb38efbfd1e0e1a458fe151555acacf2c4f3a12381d644672c664f9793db6e3459a4f05a54e3ff6d407b0d37e8014b15bd0f11bcc ip-down"
> > +8384afb992a98a7f97b484866e6aa1b1de51e901d7837f84f7ce2beba6815591450fab43957f03b65804424c4940c59640a9cd878979240a171aa77427e9c4ff fix-paths.patch
> > +160260bd2a788beaac395eadb38efbfd1e0e1a458fe151555acacf2c4f3a12381d644672c664f9793db6e3459a4f05a54e3ff6d407b0d37e8014b15bd0f11bcc ip-down
> > +8258c95a6b6e8e94d6001b5cd3a99bd3270f29ba0f2e5050a26c8d5f1b67eead8d039e71ce86a784d45e620047b0a2bb14b258d80a9ea62084ba588a4c2e2d84 ip-up"
> > diff --git a/main/ppp/fix-paths.patch b/main/ppp/fix-paths.patch
> > new file mode 100644
> > index 0000000..0b08f7f
> > --- /dev/null
> > +++ b/main/ppp/fix-paths.patch
> > _at_@ -0,0 +1,24 @@
> > +--- a/pppd/plugins/pppol2tp/Makefile.linux
> > ++++ b/pppd/plugins/pppol2tp/Makefile.linux
> > +_at_@ -6,7 +6,7 @@
> > +
> > + #***********************************************************************
> > +
> > +-DESTDIR = _at_DESTDIR@
> > ++DESTDIR = $(INSTROOT)_at_DESTDIR@
> > + LIBDIR = $(DESTDIR)/lib/pppd/$(VERSION)
> > +
> > + VERSION = $(shell awk -F '"' '/VERSION/ { print $$2; }' ../../patchlevel.h)
> > +
> > +--- a/pppd/plugins/radius/pathnames.h
> > ++++ b/pppd/plugins/radius/pathnames.h
> > +_at_@ -22,7 +22,7 @@
> > +
> > + /* normally defined in the Makefile */
> > + #ifndef _PATH_ETC_RADIUSCLIENT_CONF
> > +-#define _PATH_ETC_RADIUSCLIENT_CONF "/etc/radiusclient.conf"
> > ++#define _PATH_ETC_RADIUSCLIENT_CONF "/etc/radiusclient/radiusclient.conf"
> > + #endif
> > +
> > + #endif /* PATHNAMES_H */
> > +
> > diff --git a/main/ppp/options b/main/ppp/options
> > deleted file mode 100644
> > index 0d3a80d..0000000
> > --- a/main/ppp/options
> > +++ /dev/null
> > _at_@ -1,356 +0,0 @@
> > -# /etc/ppp/options
> > -#
> > -# Originally created by Jim Knoble <jmknoble_at_mercury.interpath.net>
> > -# Modified for Debian by alvar Bray <alvar_at_meiko.co.uk>
> > -# Modified for PPP Server setup by Christoph Lameter <clameter_at_debian.org>
> > -# Modified for ArchLinux by Manolis Tzanidakis <manolis_at_archlinux.org>
> > -#
> > -# To quickly see what options are active in this file, use this command:
> > -# egrep -v '#|^ *$' /etc/ppp/options
> > -
> > -# Specify which DNS Servers the incoming Win95 or WinNT Connection should use
> > -# Two Servers can be remotely configured
> > -# ms-dns 192.168.1.1
> > -# ms-dns 192.168.1.2
> > -
> > -# Specify which WINS Servers the incoming connection Win95 or WinNT should use
> > -# ms-wins 192.168.1.50
> > -# ms-wins 192.168.1.51
> > -
> > -# Run the executable or shell command specified after pppd has
> > -# terminated the link. This script could, for example, issue commands
> > -# to the modem to cause it to hang up if hardware modem control signals
> > -# were not available.
> > -#disconnect "chat -- \d+++\d\c OK ath0 OK"
> > -
> > -# async character map -- 32-bit hex; each bit is a character
> > -# that needs to be escaped for pppd to receive it. 0x00000001
> > -# represents '\x01', and 0x80000000 represents '\x1f'.
> > -asyncmap 0
> > -
> > -# Require the peer to authenticate itself before allowing network
> > -# packets to be sent or received.
> > -# Please do not disable this setting. It is expected to be standard in
> > -# future releases of pppd. Use the call option (see manpage) to disable
> > -# authentication for specific peers.
> > -auth
> > -
> > -# Use hardware flow control (i.e. RTS/CTS) to control the flow of data
> > -# on the serial port.
> > -crtscts
> > -
> > -# Use software flow control (i.e. XON/XOFF) to control the flow of data
> > -# on the serial port.
> > -#xonxoff
> > -
> > -# Specifies that certain characters should be escaped on transmission
> > -# (regardless of whether the peer requests them to be escaped with its
> > -# async control character map). The characters to be escaped are
> > -# specified as a list of hex numbers separated by commas. Note that
> > -# almost any character can be specified for the escape option, unlike
> > -# the asyncmap option which only allows control characters to be
> > -# specified. The characters which may not be escaped are those with hex
> > -# values 0x20 - 0x3f or 0x5e.
> > -#escape 11,13,ff
> > -
> > -# Don't use the modem control lines.
> > -#local
> > -
> > -# Specifies that pppd should use a UUCP-style lock on the serial device
> > -# to ensure exclusive access to the device.
> > -lock
> > -
> > -# Don't show the passwords when logging the contents of PAP packets.
> > -# This is the default.
> > -hide-password
> > -
> > -# When logging the contents of PAP packets, this option causes pppd to
> > -# show the password string in the log message.
> > -#show-password
> > -
> > -# Use the modem control lines. On Ultrix, this option implies hardware
> > -# flow control, as for the crtscts option. (This option is not fully
> > -# implemented.)
> > -modem
> > -
> > -# Set the MRU [Maximum Receive Unit] value to <n> for negotiation. pppd
> > -# will ask the peer to send packets of no more than <n> bytes. The
> > -# minimum MRU value is 128. The default MRU value is 1500. A value of
> > -# 296 is recommended for slow links (40 bytes for TCP/IP header + 256
> > -# bytes of data).
> > -#mru 542
> > -
> > -# Set the interface netmask to <n>, a 32 bit netmask in "decimal dot"
> > -# notation (e.g. 255.255.255.0).
> > -#netmask 255.255.255.0
> > -
> > -# Disables the default behaviour when no local IP address is specified,
> > -# which is to determine (if possible) the local IP address from the
> > -# hostname. With this option, the peer will have to supply the local IP
> > -# address during IPCP negotiation (unless it specified explicitly on the
> > -# command line or in an options file).
> > -#noipdefault
> > -
> > -# Enables the "passive" option in the LCP. With this option, pppd will
> > -# attempt to initiate a connection; if no reply is received from the
> > -# peer, pppd will then just wait passively for a valid LCP packet from
> > -# the peer (instead of exiting, as it does without this option).
> > -#passive
> > -
> > -# With this option, pppd will not transmit LCP packets to initiate a
> > -# connection until a valid LCP packet is received from the peer (as for
> > -# the "passive" option with old versions of pppd).
> > -#silent
> > -
> > -# Don't request or allow negotiation of any options for LCP and IPCP
> > -# (use default values).
> > -#-all
> > -
> > -# Disable Address/Control compression negotiation (use default, i.e.
> > -# address/control field disabled).
> > -#-ac
> > -
> > -# Disable asyncmap negotiation (use the default asyncmap, i.e. escape
> > -# all control characters).
> > -#-am
> > -
> > -# Don't fork to become a background process (otherwise pppd will do so
> > -# if a serial device is specified).
> > -#-detach
> > -
> > -# Fork to background once the ppp interface is up
> > -#updetach
> > -
> > -# Disable IP address negotiation (with this option, the remote IP
> > -# address must be specified with an option on the command line or in
> > -# an options file).
> > -#-ip
> > -
> > -# Disable IPCP negotiation and IP communication. This option should
> > -# only be required if the peer is buggy and gets confused by requests
> > -# from pppd for IPCP negotiation.
> > -#noip
> > -
> > -# Disable magic number negotiation. With this option, pppd cannot
> > -# detect a looped-back line.
> > -#-mn
> > -
> > -# Disable MRU [Maximum Receive Unit] negotiation (use default, i.e.
> > -# 1500).
> > -#-mru
> > -
> > -# Disable protocol field compression negotiation (use default, i.e.
> > -# protocol field compression disabled).
> > -#-pc
> > -
> > -# Require the peer to authenticate itself using PAP.
> > -#+pap
> > -
> > -# Don't agree to authenticate using PAP.
> > -#-pap
> > -
> > -# Require the peer to authenticate itself using CHAP [Cryptographic
> > -# Handshake Authentication Protocol] authentication.
> > -#+chap
> > -
> > -# Don't agree to authenticate using CHAP.
> > -#-chap
> > -
> > -# Disable negotiation of Van Jacobson style IP header compression (use
> > -# default, i.e. no compression).
> > -#-vj
> > -
> > -# Increase debugging level (same as -d). If this option is given, pppd
> > -# will log the contents of all control packets sent or received in a
> > -# readable form. The packets are logged through syslog with facility
> > -# daemon and level debug. This information can be directed to a file by
> > -# setting up /etc/syslog.conf appropriately (see syslog.conf(5)). (If
> > -# pppd is compiled with extra debugging enabled, it will log messages
> > -# using facility local2 instead of daemon).
> > -#debug
> > -
> > -# Append the domain name <d> to the local host name for authentication
> > -# purposes. For example, if gethostname() returns the name porsche,
> > -# but the fully qualified domain name is porsche.Quotron.COM, you would
> > -# use the domain option to set the domain name to Quotron.COM.
> > -#domain <d>
> > -
> > -# Enable debugging code in the kernel-level PPP driver. The argument n
> > -# is a number which is the sum of the following values: 1 to enable
> > -# general debug messages, 2 to request that the contents of received
> > -# packets be printed, and 4 to request that the contents of transmitted
> > -# packets be printed.
> > -#kdebug n
> > -
> > -# Set the MTU [Maximum Transmit Unit] value to <n>. Unless the peer
> > -# requests a smaller value via MRU negotiation, pppd will request that
> > -# the kernel networking code send data packets of no more than n bytes
> > -# through the PPP network interface.
> > -#mtu <n>
> > -
> > -# Set the name of the local system for authentication purposes to <n>.
> > -# This is a privileged option. With this option, pppd will use lines in the
> > -# secrets files which have <n> as the second field when looking for a
> > -# secret to use in authenticating the peer. In addition, unless overridden
> > -# with the user option, <n> will be used as the name to send to the peer
> > -# when authenticating the local system to the peer. (Note that pppd does
> > -# not append the domain name to <n>.)
> > -#name <n>
> > -
> > -# Enforce the use of the hostname as the name of the local system for
> > -# authentication purposes (overrides the name option).
> > -#usehostname
> > -
> > -# Set the assumed name of the remote system for authentication purposes
> > -# to <n>.
> > -#remotename <n>
> > -
> > -# Add an entry to this system's ARP [Address Resolution Protocol]
> > -# table with the IP address of the peer and the Ethernet address of this
> > -# system.
> > -proxyarp
> > -
> > -# Use the system password database for authenticating the peer using
> > -# PAP. Note: mgetty already provides this option. If this is specified
> > -# then dialin from users using a script under Linux to fire up ppp wont work.
> > -# login
> > -
> > -# If this option is given, pppd will send an LCP echo-request frame to the
> > -# peer every n seconds. Normally the peer should respond to the echo-request
> > -# by sending an echo-reply. This option can be used with the
> > -# lcp-echo-failure option to detect that the peer is no longer connected.
> > -lcp-echo-interval 30
> > -
> > -# If this option is given, pppd will presume the peer to be dead if n
> > -# LCP echo-requests are sent without receiving a valid LCP echo-reply.
> > -# If this happens, pppd will terminate the connection. Use of this
> > -# option requires a non-zero value for the lcp-echo-interval parameter.
> > -# This option can be used to enable pppd to terminate after the physical
> > -# connection has been broken (e.g., the modem has hung up) in
> > -# situations where no hardware modem control lines are available.
> > -lcp-echo-failure 4
> > -
> > -# Set the LCP restart interval (retransmission timeout) to <n> seconds
> > -# (default 3).
> > -#lcp-restart <n>
> > -
> > -# Set the maximum number of LCP terminate-request transmissions to <n>
> > -# (default 3).
> > -#lcp-max-terminate <n>
> > -
> > -# Set the maximum number of LCP configure-request transmissions to <n>
> > -# (default 10).
> > -#lcp-max-configure <n>
> > -
> > -# Set the maximum number of LCP configure-NAKs returned before starting
> > -# to send configure-Rejects instead to <n> (default 10).
> > -#lcp-max-failure <n>
> > -
> > -# Set the IPCP restart interval (retransmission timeout) to <n>
> > -# seconds (default 3).
> > -#ipcp-restart <n>
> > -
> > -# Set the maximum number of IPCP terminate-request transmissions to <n>
> > -# (default 3).
> > -#ipcp-max-terminate <n>
> > -
> > -# Set the maximum number of IPCP configure-request transmissions to <n>
> > -# (default 10).
> > -#ipcp-max-configure <n>
> > -
> > -# Set the maximum number of IPCP configure-NAKs returned before starting
> > -# to send configure-Rejects instead to <n> (default 10).
> > -#ipcp-max-failure <n>
> > -
> > -# Set the PAP restart interval (retransmission timeout) to <n> seconds
> > -# (default 3).
> > -#pap-restart <n>
> > -
> > -# Set the maximum number of PAP authenticate-request transmissions to
> > -# <n> (default 10).
> > -#pap-max-authreq <n>
> > -
> > -# Set the maximum time that pppd will wait for the peer to authenticate
> > -# itself with PAP to <n> seconds (0 means no limit).
> > -#pap-timeout <n>
> > -
> > -# Set the CHAP restart interval (retransmission timeout for
> > -# challenges) to <n> seconds (default 3).
> > -#chap-restart <n>
> > -
> > -# Set the maximum number of CHAP challenge transmissions to <n>
> > -# (default 10).
> > -#chap-max-challenge
> > -
> > -# If this option is given, pppd will rechallenge the peer every <n>
> > -# seconds.
> > -#chap-interval <n>
> > -
> > -# With this option, pppd will accept the peer's idea of our local IP
> > -# address, even if the local IP address was specified in an option.
> > -#ipcp-accept-local
> > -
> > -# With this option, pppd will accept the peer's idea of its (remote) IP
> > -# address, even if the remote IP address was specified in an option.
> > -#ipcp-accept-remote
> > -
> > -# Disable the IPXCP and IPX protocols.
> > -# To let pppd pass IPX packets comment this out --- you'll probably also
> > -# want to install ipxripd, and have the Internal IPX Network option enabled
> > -# in your kernel. /usr/doc/HOWTO/IPX-HOWTO.gz contains more info.
> > -noipx
> > -
> > -# Exit once a connection has been made and terminated. This is the default,
> > -# unless the `persist' or `demand' option has been specified.
> > -#nopersist
> > -
> > -# Do not exit after a connection is terminated; instead try to reopen
> > -# the connection.
> > -#persist
> > -
> > -# Terminate after n consecutive failed connection attempts.
> > -# A value of 0 means no limit. The default value is 10.
> > -#maxfail <n>
> > -maxfail 0
> > -
> > -# Initiate the link only on demand, i.e. when data traffic is present.
> > -# With this option, the remote IP address must be specified by the user on
> > -# the command line or in an options file. Pppd will initially configure
> > -# the interface and enable it for IP traffic without connecting to the peer.
> > -# When traffic is available, pppd will connect to the peer and perform
> > -# negotiation, authentication, etc. When this is completed, pppd will
> > -# commence passing data packets (i.e., IP packets) across the link.
> > -#demand
> > -
> > -# Specifies that pppd should disconnect if the link is idle for <n> seconds.
> > -# The link is idle when no data packets (i.e. IP packets) are being sent or
> > -# received. Note: it is not advisable to use this option with the persist
> > -# option without the demand option. If the active-filter option is given,
> > -# data packets which are rejected by the specified activity filter also
> > -# count as the link being idle.
> > -#idle <n>
> > -
> > -# Specifies how many seconds to wait before re-initiating the link after
> > -# it terminates. This option only has any effect if the persist or demand
> > -# option is used. The holdoff period is not applied if the link was
> > -# terminated because it was idle.
> > -#holdoff <n>
> > -
> > -# Wait for up n milliseconds after the connect script finishes for a valid
> > -# PPP packet from the peer. At the end of this time, or when a valid PPP
> > -# packet is received from the peer, pppd will commence negotiation by
> > -# sending its first LCP packet. The default value is 1000 (1 second).
> > -# This wait period only applies if the connect or pty option is used.
> > -#connect-delay <n>
> > -
> > -# Packet filtering: for more information, see pppd(8)
> > -# Any packets matching the filter expression will be interpreted as link
> > -# activity, and will cause a "demand" connection to be activated, and reset
> > -# the idle connection timer. (idle option)
> > -# The filter expression is akin to that of tcpdump(1)
> > -#active-filter <filter-expression>
> > -
> > -# uncomment the line below this if you use PPPoE
> > -#plugin /usr/lib/pppd/plugins/pppoe.so
> > -
> > -# ---<End of File>---
> > diff --git a/main/ppp/plog b/main/ppp/plog
> > deleted file mode 100644
> > index 84d2c73..0000000
> > --- a/main/ppp/plog
> > +++ /dev/null
> > _at_@ -1,7 +0,0 @@
> > -#!/bin/sh
> > -
> > -if [ -s /var/log/ppp.log ]; then
> > - exec tail "$_at_" /var/log/ppp.log
> > -else
> > - exec tail "$_at_" /var/log/syslog | grep ' \(pppd\|chat\)\['
> > -fi
> > diff --git a/main/ppp/poff b/main/ppp/poff
> > deleted file mode 100644
> > index 8b4dffc..0000000
> > --- a/main/ppp/poff
> > +++ /dev/null
> > _at_@ -1,103 +0,0 @@
> > -#!/bin/sh
> > -
> > -# Written by John Hasler <john_at_dhh.gt.org> and based on work
> > -# by Phil Hands <phil_at_hands.com>. Distributed under the GNU GPL
> > -
> > -if [ -x /usr/bin/kill ]; then
> > - KILL="/usr/bin/kill"
> > -else
> > - KILL="/bin/kill"
> > -fi
> > -SIG=TERM
> > -DONE="stopped"
> > -MODE=""
> > -
> > -usage ()
> > -{
> > - cat <<!EOF!
> > -usage: $0 [option] [provider]
> > -options:
> > - -r Cause pppd to drop the line and redial.
> > - -d Toggle the state of pppd's debug option.
> > - -c Cause pppd to renegotiate compression.
> > - -a Stop all pppd's. 'provider' will be ignored.
> > - -h Print this help summary and exit.
> > - -v Print version and exit.
> > - none Stop pppd.
> > -
> > -Options may not be combined.
> > -
> > -If 'provider' is omitted pppd will be stopped or signalled if and only if
> > -there is exactly one running unless the '-a' option was given. If
> > -'provider' is supplied the pppd controlling the connection to that
> > -provider will be stopped or signalled.
> > -!EOF!
> > -}
> > -
> > -# Get option. If there are none replace the "?" that getopts puts in
> > -# FLAG on error with "null".
> > -getopts rdcavh FLAG
> > -if [ "$?" -ne 0 ]; then
> > - FLAG="null"
> > -fi
> > -
> > -# Check for additional options. Should be none.
> > -getopts :rdcavh DUMMY
> > -if [ "$?" -eq 0 ]; then
> > - echo "$0: Illegal option -- ${OPTARG}."
> > - exit 1
> > -fi
> > -
> > -case $FLAG in
> > - "r") SIG=HUP; DONE=signalled; shift ;;
> > - "d") SIG=USR1; DONE=signalled; shift ;;
> > - "c") SIG=USR2; DONE=signalled; shift ;;
> > - "a") MODE="all"; shift ;;
> > - "v") echo "$0$Revision: 1.1 $_TrickToPrint_RCS_Revision"; exit 0 ;;
> > - "h") usage; exit 0 ;;
> > - "?") exit 1;
> > -esac
> > -
> > -# Get the PIDs of all the pppds running. Could also get these from
> > -# /var/run, but pppd doesn't create .pid files until ppp is up.
> > -PIDS=`pidof pppd`
> > -
> > -# poff is pointless if pppd isn't running.
> > -if test -z "$PIDS"; then
> > - echo "$0: No pppd is running. None ${DONE}."
> > - exit 1
> > -fi
> > -
> > -# Find out how many pppd's are running.
> > -N=`echo "$PIDS" | wc -w`
> > -
> > -# If there are no arguments we can't do anything if there is more than one
> > -# pppd running.
> > -if test "$#" -eq 0 -a "$N" -gt 1 -a $FLAG != "a" ; then
> > - echo "$0: More than one pppd running and no "-a" option and
> > -no arguments supplied. Nothing ${DONE}."
> > - exit 1
> > -fi
> > -
> > -# If either there are no arguments or '-a' was specified kill all the
> > -# pppd's.
> > -if test "$#" -eq 0 -o "$MODE" = "all" ; then
> > - $KILL -$SIG $PIDS || {
> > - echo "$0: $KILL failed. None ${DONE}."
> > - exit 1
> > - }
> > - exit 0
> > -fi
> > -
> > -# There is an argument, so kill the pppd started on that provider.
> > -PID=`ps axw | grep "[ /]pppd call $1 *\$" | awk '{print $1}'`
> > -if test -n "$PID" ; then
> > - $KILL -$SIG $PID || {
> > - echo "$0: $KILL failed. None ${DONE}."
> > - exit 1
> > - }
> > -else
> > - echo "$0: I could not find a pppd process for provider '$1'. None ${DONE}."
> > - exit 1
> > -fi
> > -exit 0
> > diff --git a/main/ppp/pon b/main/ppp/pon
> > deleted file mode 100644
> > index 3688505..0000000
> > --- a/main/ppp/pon
> > +++ /dev/null
> > _at_@ -1,32 +0,0 @@
> > -#!/bin/sh
> > -
> > -case "$1" in
> > - -*) echo "
> > -Usage: pon [provider] [arguments]
> > -
> > -If you specify one argument, a PPP connection will be started using
> > -settings from the appropriate file in the /etc/ppp/peers/ directory, and
> > -any additional arguments supplied will be passed as extra arguments to
> > -pppd.
> > -"
> > - exit 0
> > - ;;
> > -esac
> > -
> > -if [ -z "$1" -a ! -f /etc/ppp/peers/provider ]; then
> > - echo "
> > -Please configure /etc/ppp/peers/provider or use a command line argument to
> > -use another file in /etc/ppp/peers/ directory.
> > -"
> > - exit 1
> > -fi
> > -
> > -if [ "$1" -a ! -f "/etc/ppp/peers/$1" ]; then
> > - echo "
> > -The file /etc/ppp/peers/$1 does not exist.
> > -"
> > - exit 1
> > -fi
> > -
> > -exec /usr/sbin/pppd call ${_at_:-provider}
> > -
> > diff --git a/main/ppp/pon.1 b/main/ppp/pon.1
> > deleted file mode 100644
> > index bb32205..0000000
> > --- a/main/ppp/pon.1
> > +++ /dev/null
> > _at_@ -1,121 +0,0 @@
> > -.\" This manual is published under the GPL.
> > -.\" All guidelines specified in the GPL apply here.
> > -.\" To get an ascii file:
> > -.\" groff -man -Tascii pon.1 > pon.txt
> > -.\"
> > -.TH PON 1 "July 2000" "Debian Project" "Debian PPPD"
> > -.SH NAME
> > -pon, poff, plog \- starts up, shuts down or lists the log of PPP connections
> > -.SH SYNOPSIS
> > -.B pon
> > -[ isp-name [ options ] ]
> > -.br
> > -.B poff
> > -[ -r ] [ -d ] [ -c ] [ -a ] [ -h ] [ isp-name ]
> > -.br
> > -.B plog
> > -[ arguments ]
> > -.SH DESCRIPTION
> > -This manual page describes the \fBpon\fP, \fBplog\fP and \fBpoff\fP
> > -scripts, which allow users to control PPP connections.
> > -..
> > -.SS pon
> > -\fBpon\fP, invoked without arguments, runs the \fI/etc/ppp/ppp_on_boot\fP
> > -file, if it exists and is executable. Otherwise, a PPP connection will be
> > -started using configuration from \fI/etc/ppp/peers/provider\fP.
> > -This is the default behaviour unless an \fBisp-name\fP argument is given.
> > -.PP
> > -For instance, to use ISP configuration "myisp" run:
> > -.IP
> > -pon myisp
> > -.PP
> > -\fBpon\fP will then use the options file \fI/etc/ppp/peers/myisp\fP.
> > -You can pass additional \fBoptions\fP after the ISP name, too.
> > -\fBpon\fP can be used to run multiple, simultaneous PPP connections.
> > -..
> > -.SS poff
> > -\fBpoff\fP closes a PPP connection. If more than one PPP connection exists,
> > -the one named in the argument to \fBpoff\fP will be killed, e.g.
> > -.IP
> > -poff myprovider2
> > -.PP
> > -will terminate the connection to myprovider2, and leave the PPP connections
> > -to e.g. "myprovider1" or "myprovider3" up and running.
> > -.PP
> > -\fBpoff\fP takes the following command line options:
> > -.RS
> > -.TP
> > -.B "\-r"
> > -causes the connection to be redialed after it is dropped.
> > -.TP
> > -.B "\-d"
> > -toggles the state of pppd's debug option.
> > -.TP
> > -.B "\-c"
> > -causes
> > -.BR pppd (8)
> > -to renegotiate compression.
> > -.TP
> > -.B "\-a"
> > -stops all running ppp connections. If the argument \fBisp-name\fP
> > -is given it will be ignored.
> > -.TP
> > -.B "\-h"
> > -displays help information.
> > -.TP
> > -.B "\-v"
> > -prints the version and exits.
> > -.PP
> > -If no argument is given, \fBpoff\fP will stop or signal pppd if and only
> > -if there is exactly one running. If more than one connection is active,
> > -it will exit with an error code of 1.
> > -..
> > -.SS plog
> > -\fBplog\fP shows you the last few lines of \fI/var/log/ppp.log\fP. If that
> > -file doesn't exist, it shows you the last few lines of your
> > -\fI/var/log/syslog\fP file, but excluding the lines not generated by pppd.
> > -This script makes use of the
> > -.BR tail (1)
> > -command, so arguments that can be passed to
> > -.BR tail (1)
> > -can also be passed to \fBplog\fP.
> > -.PP
> > -Note: the \fBplog\fP script can only be used by root or another system
> > -administrator in group "adm", due to security reasons. Also, to have all
> > -pppd-generated information in one logfile, that plog can show, you need the
> > -following line in your \fI/etc/syslog.conf\fP file:
> > -.PP
> > -local2.* -/var/log/ppp.log
> > -.RE
> > -.SH FILES
> > -.TP
> > -.I /etc/ppp/options
> > -PPPd system options file.
> > -.TP
> > -.I /etc/ppp/pap-secrets
> > -System PAP passwords file.
> > -.TP
> > -.I /etc/ppp/chap-secrets
> > -System CHAP passwords file.
> > -.TP
> > -.I /etc/ppp/peers/
> > -Directory holding the peer options files. The default file is called
> > -\fIprovider\fP.
> > -.TP
> > -.I /etc/chatscripts/provider
> > -The chat script invoked from the default \fI/etc/ppp/peers/provider\fP.
> > -.TP
> > -.I /var/log/ppp.log
> > -The default PPP log file.
> > -.SH AUTHORS
> > -The p-commands were written by Christoph Lameter <clameter_at_debian.org>.
> > -Updated and revised by Philip Hands <phil_at_hands.com>.
> > -.br
> > -This manual was written by Othmar Pasteka <othmar_at_tron.at>. Modified
> > -by Rob Levin <lilo_at_openprojects.net>, with some extensions taken from
> > -the old p-commands manual written by John Hasler <jhasler_at_debian.org>.
> > -.SH "SEE ALSO"
> > -.BR pppd (8),
> > -.BR chat (8),
> > -.BR tail (1).
> > -
>
>
>
> ---
> Unsubscribe: alpine-devel+unsubscribe_at_lists.alpinelinux.org
> Help: alpine-devel+help_at_lists.alpinelinux.org
> ---
>



---
Unsubscribe:  alpine-devel+unsubscribe_at_lists.alpinelinux.org
Help:         alpine-devel+help_at_lists.alpinelinux.org
---
Received on Thu Dec 11 2014 - 16:15:47 UTC