Mail archive
alpine-user

Re: [alpine-user] passwordless wifi,

From: Cosmo Borsky <me_at_cosmoborsky.com>
Date: Wed, 16 Jan 2019 14:31:37 -0500

Try the following:
```
rc-update del wpa_supplicant default
rc-update del wpa_cli default
rc-update add wpa_supplicant boot
rc-update add wpa_cli boot
```

On 1/16/19 2:22 PM, PICCORO McKAY Lenz wrote:
> El mié., 16 de ene. de 2019 a la(s) 15:19, Cosmo Borsky
> (me_at_cosmoborsky.com <mailto:me_at_cosmoborsky.com>) escribió:
>
> Try `cat /etc/group | grep "net\|dial\|wheel"`
> It should print out:
> ```
> wheel:x:10:root,user
> dialout:x:20:root,user
> netdev:x:28:
> ```
>
> user gneral already in those groups
>
>  
>
>> 2) users cannot odo nay thing.. due the firts
> I'm not sure what you mean by this
>> 3) cosole now works, but at the xfce4 does not!
> Do you mean X11 does not work?
> Does `startx` work?
>
> Please sorrry, i write very bad due in hurry.. ok again:
>
> 2) users cannot do any thing, network manager still said: "device its
> not ready"
>
> 3) connection at console works but in some restarts (randomly) said
> "device are busy"
>
> tested in a hp dual core with atheros and also on a classmate
> minilaptop with rtl device wifi
>  
>
>
> Ensure you have the proper video driver installed:
> https://wiki.alpinelinux.org/wiki/XFCE_Setup#Video_packages
> `xf86-video-nouveau` for nvidia graphics
>
>
>>
>> El mar., 15 de ene. de 2019 a la(s) 14:45, Cosmo Borsky
>> (me_at_cosmoborsky.com <mailto:me_at_cosmoborsky.com>) escribió:
>>
>> Try adding
>> `wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf` to `iface
>> wlan0` in your `/etc/network/interfaces` file.
>> You might have luck changing `wpa-conf` to `wpa-roam`:
>> http://manual.aptosid.com/en/inet-setup-en.htm
>>
>> On 1/14/19 2:00 PM, PICCORO McKAY Lenz wrote:
>>>
>>> El lun., 14 de ene. de 2019 a la(s) 14:35, Cosmo Borsky
>>> (me_at_cosmoborsky.com <mailto:me_at_cosmoborsky.com>) escribió:
>>> > Hi Gert,
>>> > As for passwordless wifi, try setting `key_mgmt=NONE` in
>>> your wpa_supplicant network entry.
>>>
>>> hi, i already do that! does permit scan and there's no
>>> connect..  network manager at desktop said: "device its not
>>> ready" and at the console if there's no desktop install said
>>> "device its busy"
>>>
>>> detailed steps here, some important notes, i added group
>>> netdev due so also networkmananger can manage too using
>>> "manager=true" in ifupdown, see and tell me what are the bad
>>> steps here?
>>>
>>> |echo 1 > /proc/sys/net/ipv6/conf/all/disable_ipv6 apk add
>>> dhcpcd wireless-tools wpa_supplicant wireless-tools-doc
>>> wpa_supplicant-doc rc-update add wpa_supplicant rc-update
>>> add dhcpcd ip link set wlan0 up iwlist wlan0 scanning
>>> iwconfig wlan0 essid PASSLESSNET cat >
>>> /etc/network/intefaces << EOF auto lo iface lo inet loopback
>>> auto eth0 iface eth0 inet dhcp auto wlan0 allow-hotplug
>>> wlan0 iface wlan0 inet dhcp wireless-essid PASSLESSNET EOF ||cat > /etc/wpa_supplicant/wpa_supplicant.conf << EOF
>>> ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=|||dialout |network={ ssid=|||PASSLESSNET key_mgmt=NONE | } EOF rc-service
>>> wpa_supplicant start |||rc-service dhcpcd start cat >
>>> /etc/NetworkManager/NetworkManager.conf << EOF [main]
>>> plugins=ifupdown,keyfile [ifupdown] managed=true ||
>>> ||EOF ||
>>> ||||
>>> Lenz McKAY Gerardo (PICCORO)
>>> http://qgqlochekone.blogspot.com
>>
>




---
Unsubscribe:  alpine-user+unsubscribe_at_lists.alpinelinux.org
Help:         alpine-user+help_at_lists.alpinelinux.org
---
Received on Wed Jan 16 2019 - 14:31:37 UTC