Jann - Ove Risvik: 1 main/open-iscsi: musl fix, second try. fixes bug #4802. added default config file. 3 files changed, 332 insertions(+), 14 deletions(-)
Copy & paste the following snippet into your terminal to import this patchset into git:
curl -s https://lists.alpinelinux.org/~alpine/aports/patches/1522/mbox | git am -3Learn more about email & git
While making sure it didn't throw away legitimate unrecognised arguments I managed to break everything else... Not good. Didn't test it well enough. :/
Natanael Copa <ncopa@alpinelinux.org>I looked at it and it is easy to get it wrong.
I've also included the default config file. Previously the package didn't include all the config files needed to work out of the box.
Natanael Copa <ncopa@alpinelinux.org>Where did you find the config file? Is there some copy in the sources that we can use instead of shipping our own variant.
--- main/open-iscsi/APKBUILD | 21 +-- main/open-iscsi/iscsid.conf | 304 +++++++++++++++++++++++++++++++++++++++ main/open-iscsi/musl-fixes.patch | 21 ++- 3 files changed, 332 insertions(+), 14 deletions(-) create mode 100644 main/open-iscsi/iscsid.conf diff --git a/main/open-iscsi/APKBUILD b/main/open-iscsi/APKBUILD index 47194e3..cd9a519 100644 --- a/main/open-iscsi/APKBUILD +++ b/main/open-iscsi/APKBUILD @@ -2,7 +2,7 @@ pkgname=open-iscsi pkgver=2.0.873 _realver=${pkgver%.*}-${pkgver##*.} -pkgrel=4 +pkgrel=5 pkgdesc="High performance, transport independent, multi-platform iSCSI initiator" url="http://www.open-iscsi.org" arch="all" @@ -14,7 +14,8 @@ subpackages="$pkgname-doc" source="http://arch.p5n.pp.ru/~sergej/dl/$pkgname-${_realver}.tar.gz musl-fixes.patch iscsid.initd - iscsid.confd" + iscsid.confd + iscsid.conf" _builddir="$srcdir"/$pkgname-$_realver @@ -45,17 +46,21 @@ package() { mv $pkgdir/sbin/iscsid $pkgdir/usr/sbin install -Dm755 "$srcdir"/iscsid.initd "$pkgdir"/etc/init.d/iscsid install -Dm644 "$srcdir"/iscsid.confd "$pkgdir"/etc/conf.d/iscsid + install -Dm644 "$srcdir"/iscsid.conf "$pkgdir"/etc/iscsi/iscsid.conf } md5sums="8b8316d7c9469149a6cc6234478347f7 open-iscsi-2.0-873.tar.gz -3b5e052956ba89b011b3383fe599de83 musl-fixes.patch +93d493b1ad4fb2d246eb532446aa164d musl-fixes.patch c6a0c15c0c21b13915179fb7e0cf0003 iscsid.initd -b762b687d4628791b4362df22cf22d34 iscsid.confd" +b762b687d4628791b4362df22cf22d34 iscsid.confd +49c29d08c08e74699724f1fb3de21a6c iscsid.conf" sha256sums="7dd9f2f97da417560349a8da44ea4fcfe98bfd5ef284240a2cc4ff8e88ac7cd9 open-iscsi-2.0-873.tar.gz -6f55aa7c52c5bdefe67a8092b8d2c5a77536bd3b1b9f347fafa1f2cda94d9cd4 musl-fixes.patch +57d6b4040a9b43c8a8864fb3e1c25ac48b78427265f4487744685a9a2b1b2954 musl-fixes.patch 38edede472f478ce01f40e3557c315de3f3ecf1d0c0dbab2883517840a7186b5 iscsid.initd -673bf4744efc3276d372587c996270821d39dcdc0bf27a13691ea6b0e814b6d0 iscsid.confd" +673bf4744efc3276d372587c996270821d39dcdc0bf27a13691ea6b0e814b6d0 iscsid.confd +0e1db9b03693a1090cfd7b28a790f83ec6615984608b0cf8465aa91db2437e23 iscsid.conf" sha512sums="4e67116cb7dd49381c9279645e5a661f05596ae6be3b832772089828b3764ca2d04b5dea1bcc337071efb52c3c75a6fb943136c659ee59500f3a198ed0dcea6b open-iscsi-2.0-873.tar.gz -a51b81d62b179ff17b3ade09873113ed16b207bcccdd02cd86c76911d4b890d7ff9e1103ec3168af78560d606910374afaa04fa3356fa9e9ad6b7142a69e06e6 musl-fixes.patch +e45ce5deec9d3861568e0be3390827da525b523b6d0a47a99f85becb4416e3a26f5e17f077a891c43ae90e621fa8d357123b9b3573a731788fac2c12b40239a6 musl-fixes.patch e16d0abf117c0c282e98abb14893923609dc6078f770facd0578ad72ce6e3fc7b9c84a39628c1246d955ba6bb204fb902bcba6d5959ac755fee7e2a85da181df iscsid.initd -075bb9cb783be7ccbc799947e0e042b85310d40b3045141dc1be40ca84ed1cc0e1e54559df501c512c179e28375314b27a03c15d9a6d4b1cabd428b2279985d3 iscsid.confd" +075bb9cb783be7ccbc799947e0e042b85310d40b3045141dc1be40ca84ed1cc0e1e54559df501c512c179e28375314b27a03c15d9a6d4b1cabd428b2279985d3 iscsid.confd +3686d31c5642e611c0c0c61f0f42a33030a74b518a2a108f004b9bd34b2b98d8e29ee2416a5b9cc447ab0449bdc94158b2323d977e7b7d2930dd4dcf0866da68 iscsid.conf" diff --git a/main/open-iscsi/iscsid.conf b/main/open-iscsi/iscsid.conf new file mode 100644 index 0000000..ab4df53 --- /dev/null +++ b/main/open-iscsi/iscsid.conf @@ -0,0 +1,304 @@ +# +# Open-iSCSI default configuration. +# Could be located at /etc/iscsi/iscsid.conf or ~/.iscsid.conf +# +# Note: To set any of these values for a specific node/session run +# the iscsiadm --mode node --op command for the value. See the README +# and man page for iscsiadm for details on the --op command. +# + +###################### +# iscsid daemon config +###################### +# If you want iscsid to start the first time a iscsi tool +# needs to access it, instead of starting it when the init +# scripts run, set the iscsid startup command here. This +# should normally only need to be done by distro package +# maintainers. +# +# Default for Fedora and RHEL. (uncomment to activate). + iscsid.startup = /etc/init.d/iscsid start +# +# Default for upstream open-iscsi scripts (uncomment to activate). +#iscsid.startup = /sbin/iscsid + + +############################# +# NIC/HBA and driver settings +############################# +# open-iscsi can create a session and bind it to a NIC/HBA. +# To set this up see the example iface config file. + +#***************** +# Startup settings +#***************** + +# To request that the iscsi initd scripts startup a session set to "automatic". +# node.startup = automatic +# +# To manually startup the session set to "manual". The default is manual. +node.startup = manual + +# For "automatic" startup nodes, setting this to "Yes" will try logins on each +# available iface until one succeeds, and then stop. The default "No" will try +# logins on all availble ifaces simultaneously. +node.leading_login = No + +# ************* +# CHAP Settings +# ************* + +# To enable CHAP authentication set node.session.auth.authmethod +# to CHAP. The default is None. +#node.session.auth.authmethod = CHAP + +# To set a CHAP username and password for initiator +# authentication by the target(s), uncomment the following lines: +#node.session.auth.username = username +#node.session.auth.password = password + +# To set a CHAP username and password for target(s) +# authentication by the initiator, uncomment the following lines: +#node.session.auth.username_in = username_in +#node.session.auth.password_in = password_in + +# To enable CHAP authentication for a discovery session to the target +# set discovery.sendtargets.auth.authmethod to CHAP. The default is None. +#discovery.sendtargets.auth.authmethod = CHAP + +# To set a discovery session CHAP username and password for the initiator +# authentication by the target(s), uncomment the following lines: +#discovery.sendtargets.auth.username = username +#discovery.sendtargets.auth.password = password + +# To set a discovery session CHAP username and password for target(s) +# authentication by the initiator, uncomment the following lines: +#discovery.sendtargets.auth.username_in = username_in +#discovery.sendtargets.auth.password_in = password_in + +# ******** +# Timeouts +# ******** +# +# See the iSCSI REAME's Advanced Configuration section for tips +# on setting timeouts when using multipath or doing root over iSCSI. +# +# To specify the length of time to wait for session re-establishment +# before failing SCSI commands back to the application when running +# the Linux SCSI Layer error handler, edit the line. +# The value is in seconds and the default is 120 seconds. +# Special values: +# - If the value is 0, IO will be failed immediately. +# - If the value is less than 0, IO will remain queued until the session +# is logged back in, or until the user runs the logout command. +node.session.timeo.replacement_timeout = 120 + +# To specify the time to wait for login to complete, edit the line. +# The value is in seconds and the default is 15 seconds. +node.conn[0].timeo.login_timeout = 15 + +# To specify the time to wait for logout to complete, edit the line. +# The value is in seconds and the default is 15 seconds. +node.conn[0].timeo.logout_timeout = 15 + +# Time interval to wait for on connection before sending a ping. +node.conn[0].timeo.noop_out_interval = 5 + +# To specify the time to wait for a Nop-out response before failing +# the connection, edit this line. Failing the connection will +# cause IO to be failed back to the SCSI layer. If using dm-multipath +# this will cause the IO to be failed to the multipath layer. +node.conn[0].timeo.noop_out_timeout = 5 + +# To specify the time to wait for abort response before +# failing the operation and trying a logical unit reset edit the line. +# The value is in seconds and the default is 15 seconds. +node.session.err_timeo.abort_timeout = 15 + +# To specify the time to wait for a logical unit response +# before failing the operation and trying session re-establishment +# edit the line. +# The value is in seconds and the default is 30 seconds. +node.session.err_timeo.lu_reset_timeout = 30 + +# To specify the time to wait for a target response +# before failing the operation and trying session re-establishment +# edit the line. +# The value is in seconds and the default is 30 seconds. +node.session.err_timeo.tgt_reset_timeout = 30 + + +#****** +# Retry +#****** + +# To specify the number of times iscsid should retry a login +# if the login attempt fails due to the node.conn[0].timeo.login_timeout +# expiring modify the following line. Note that if the login fails +# quickly (before node.conn[0].timeo.login_timeout fires) because the network +# layer or the target returns an error, iscsid may retry the login more than +# node.session.initial_login_retry_max times. +# +# This retry count along with node.conn[0].timeo.login_timeout +# determines the maximum amount of time iscsid will try to +# establish the initial login. node.session.initial_login_retry_max is +# multiplied by the node.conn[0].timeo.login_timeout to determine the +# maximum amount. +# +# The default node.session.initial_login_retry_max is 8 and +# node.conn[0].timeo.login_timeout is 15 so we have: +# +# node.conn[0].timeo.login_timeout * node.session.initial_login_retry_max = +# 120 seconds +# +# Valid values are any integer value. This only +# affects the initial login. Setting it to a high value can slow +# down the iscsi service startup. Setting it to a low value can +# cause a session to not get logged into, if there are distuptions +# during startup or if the network is not ready at that time. +node.session.initial_login_retry_max = 8 + +################################ +# session and device queue depth +################################ + +# To control how many commands the session will queue set +# node.session.cmds_max to an integer between 2 and 2048 that is also +# a power of 2. The default is 128. +node.session.cmds_max = 128 + +# To control the device's queue depth set node.session.queue_depth +# to a value between 1 and 1024. The default is 32. +node.session.queue_depth = 32 + +################################## +# MISC SYSTEM PERFORMANCE SETTINGS +################################## + +# For software iscsi (iscsi_tcp) and iser (ib_iser) each session +# has a thread used to transmit or queue data to the hardware. For +# cxgb3i you will get a thread per host. +# +# Setting the thread's priority to a lower value can lead to higher throughput +# and lower latencies. The lowest value is -20. Setting the priority to +# a higher value, can lead to reduced IO performance, but if you are seeing +# the iscsi or scsi threads dominate the use of the CPU then you may want +# to set this value higher. +# +# Note: For cxgb3i you must set all sessions to the same value, or the +# behavior is not defined. +# +# The default value is -20. The setting must be between -20 and 20. +node.session.xmit_thread_priority = -20 + + +#*************** +# iSCSI settings +#*************** + +# To enable R2T flow control (i.e., the initiator must wait for an R2T +# command before sending any data), uncomment the following line: +# +#node.session.iscsi.InitialR2T = Yes +# +# To disable R2T flow control (i.e., the initiator has an implied +# initial R2T of "FirstBurstLength" at offset 0), uncomment the following line: +# +# The defaults is No. +node.session.iscsi.InitialR2T = No + +# +# To disable immediate data (i.e., the initiator does not send +# unsolicited data with the iSCSI command PDU), uncomment the following line: +# +#node.session.iscsi.ImmediateData = No +# +# To enable immediate data (i.e., the initiator sends unsolicited data +# with the iSCSI command packet), uncomment the following line: +# +# The default is Yes +node.session.iscsi.ImmediateData = Yes + +# To specify the maximum number of unsolicited data bytes the initiator +# can send in an iSCSI PDU to a target, edit the following line. +# +# The value is the number of bytes in the range of 512 to (2^24-1) and +# the default is 262144 +node.session.iscsi.FirstBurstLength = 262144 + +# To specify the maximum SCSI payload that the initiator will negotiate +# with the target for, edit the following line. +# +# The value is the number of bytes in the range of 512 to (2^24-1) and +# the defauls it 16776192 +node.session.iscsi.MaxBurstLength = 16776192 + +# To specify the maximum number of data bytes the initiator can receive +# in an iSCSI PDU from a target, edit the following line. +# +# The value is the number of bytes in the range of 512 to (2^24-1) and +# the default is 262144 +node.conn[0].iscsi.MaxRecvDataSegmentLength = 262144 + +# To specify the maximum number of data bytes the initiator will send +# in an iSCSI PDU to the target, edit the following line. +# +# The value is the number of bytes in the range of 512 to (2^24-1). +# Zero is a special case. If set to zero, the initiator will use +# the target's MaxRecvDataSegmentLength for the MaxXmitDataSegmentLength. +# The default is 0. +node.conn[0].iscsi.MaxXmitDataSegmentLength = 0 + +# To specify the maximum number of data bytes the initiator can receive +# in an iSCSI PDU from a target during a discovery session, edit the +# following line. +# +# The value is the number of bytes in the range of 512 to (2^24-1) and +# the default is 32768 +# +discovery.sendtargets.iscsi.MaxRecvDataSegmentLength = 32768 + +# To allow the targets to control the setting of the digest checking, +# with the initiator requesting a preference of enabling the checking, uncomment# one or both of the following lines: +#node.conn[0].iscsi.HeaderDigest = CRC32C,None +#node.conn[0].iscsi.DataDigest = CRC32C,None +# +# To allow the targets to control the setting of the digest checking, +# with the initiator requesting a preference of disabling the checking, +# uncomment one or both of the following lines: +#node.conn[0].iscsi.HeaderDigest = None,CRC32C +#node.conn[0].iscsi.DataDigest = None,CRC32C +# +# To enable CRC32C digest checking for the header and/or data part of +# iSCSI PDUs, uncomment one or both of the following lines: +#node.conn[0].iscsi.HeaderDigest = CRC32C +#node.conn[0].iscsi.DataDigest = CRC32C +# +# To disable digest checking for the header and/or data part of +# iSCSI PDUs, uncomment one or both of the following lines: +#node.conn[0].iscsi.HeaderDigest = None +#node.conn[0].iscsi.DataDigest = None +# +# The default is to never use DataDigests or HeaderDigests. +# + +# For multipath configurations, you may want more than one session to be +# created on each iface record. If node.session.nr_sessions is greater +# than 1, performing a 'login' for that node will ensure that the +# appropriate number of sessions is created. +node.session.nr_sessions = 1 + +#************ +# Workarounds +#************ + +# Some targets like IET prefer after an initiator has sent a task +# management function like an ABORT TASK or LOGICAL UNIT RESET, that +# it does not respond to PDUs like R2Ts. To enable this behavior uncomment +# the following line (The default behavior is Yes): +node.session.iscsi.FastAbort = Yes + +# Some targets like Equalogic prefer that after an initiator has sent +# a task management function like an ABORT TASK or LOGICAL UNIT RESET, that +# it continue to respond to R2Ts. To enable this uncomment this line +# node.session.iscsi.FastAbort = No diff --git a/main/open-iscsi/musl-fixes.patch b/main/open-iscsi/musl-fixes.patch index 910b485..f101eda 100644 --- a/main/open-iscsi/musl-fixes.patch +++ b/main/open-iscsi/musl-fixes.patch @@ -29,9 +29,17 @@ #include <dirent.h> #include <limits.h> #include <sys/stat.h> ---- ./usr/iscsiadm.c.orig -+++ ./usr/iscsiadm.c -@@ -2553,7 +2553,10 @@ main(int argc, char **argv) +--- ./usr/iscsiadm.c.orig 2012-05-21 02:59:24.000000000 +0200 ++++ ./usr/iscsiadm.c 2016-07-20 22:00:54.430451701 +0200 +@@ -2403,6 +2403,7 @@ main(int argc, char **argv) + int tpgt = PORTAL_GROUP_TAG_UNKNOWN, killiscsid=-1, do_show=0; + int packet_size=32, ping_count=1, ping_interval=0; + int do_discover = 0, sub_mode = -1; ++ int argerror = 0; + struct sigaction sa_old; + struct sigaction sa_new; + struct list_head ifaces; +@@ -2553,7 +2554,11 @@ main(int argc, char **argv) return 0; case 'h': usage(0); @@ -39,17 +47,18 @@ + + case '?': + log_error("unrecognized character '%c'", optopt); ++ argerror = 1; + } if (name && value) { param = idbm_alloc_user_param(name, value); -@@ -2568,8 +2571,7 @@ main(int argc, char **argv) +@@ -2568,8 +2573,7 @@ main(int argc, char **argv) } } - if (optopt) { - log_error("unrecognized character '%c'", optopt); -+ if (opterr) { ++ if (argerror) { rc = ISCSI_ERR_INVAL; goto free_ifaces; - } +
Natanael Copa <ncopa@alpinelinux.org>This looks better. I think I'll merge the fix/workaround for getopt into a single commit and then add a default config in separate commit. The reason is that I want to backport the fix to stable, but without adding the config.Natanael Copa <ncopa@alpinelinux.org>whoops! sorry. they were already applied. -nc --- Unsubscribe: alpine-aports+unsubscribe@lists.alpinelinux.org Help: alpine-aports+help@lists.alpinelinux.org ---Thanks! -nc --- Unsubscribe: alpine-aports+unsubscribe@lists.alpinelinux.org Help: alpine-aports+help@lists.alpinelinux.org ---
-- 2.8.3 --- Unsubscribe: alpine-aports+unsubscribe@lists.alpinelinux.org Help: alpine-aports+help@lists.alpinelinux.org ---