zabbix_proxy.conf contained the contents of zabbix_server.conf, which
contains some settings which are invalid.
---
 main/zabbix/zabbix_proxy.conf | 708 ++++++++++++++++++++++++++++++++----------
 1 file changed, 547 insertions(+), 161 deletions(-)

diff --git a/main/zabbix/zabbix_proxy.conf b/main/zabbix/zabbix_proxy.conf
index 899fac2..17c7fbd 100644
--- a/main/zabbix/zabbix_proxy.conf
+++ b/main/zabbix/zabbix_proxy.conf
@@ -1,175 +1,561 @@
-# This is config file for ZABBIX server process
-# To get more information about ZABBIX, 
-# go http://www.zabbix.com
+# This is a configuration file for Zabbix Proxy process
+# To get more information about Zabbix,
+# visit http://www.zabbix.com
 
 ############ GENERAL PARAMETERS #################
 
-# IP address (or hostname) of ZABBIX servers. 
+### Option: ProxyMode
+#	Proxy operating mode
+#	0 - proxy in the active mode
+#	1 - proxy in the passive mode
+#
+# Mandatory: no
+# Default:
+# ProxyMode=0
+
+### Option: Server
+#	IP address (or hostname) of Zabbix server.
+#	Active proxy will get configuration data from the server.
+#	For a proxy in the passive mode this parameter will be ignored.
+#
+# Mandatory: yes (if ProxyMode is set to 0)
+# Default:
+# Server=
 
 Server=127.0.0.1
 
-# Server port for sending active checks
-
-ServerPort=10051
-
-# Unique hostname.
-
-Hostname=proxy
-
-# Number of pre-forked instances of pollers
-# Default value is 5
-# This parameter must be between 0 and 255
-#StartPollers=5
-
-# Number of pre-forked instances of IPMI pollers
-# Default value is 0
-# This parameter must be between 0 and 255
-#StartIPMIPollers=0
-
-# Number of pre-forked instances of pollers for unreachable hosts
-# Default value is 1
-# This parameter must be between 0 and 255
-#StartPollersUnreachable=1
-
-# Number of pre-forked instances of trappers
-# Default value is 5
-# This parameter must be between 0 and 255
-#StartTrappers=5
-
-# Number of pre-forked instances of ICMP pingers
-# Default value is 1
-# This parameter must be between 0 and 255
-#StartPingers=1
-
-# Number of pre-forked instances of discoverers
-# Default value is 1
-# This parameter must be between 0 and 255
-#StartDiscoverers=1
-
-# Number of pre-forked instances of HTTP pollers
-# Default value is 1
-# This parameter must be between 0 and 255
-#StartHTTPPollers=1
-
-# Listen port for trapper. Default port number is 10051. This parameter 
-# must be between 1024 and 32767
-#ListenPort=10051
-
-# Source IP address for outgouing connections
-#SourceIP=
-
-# Listen interface for trapper. Trapper will listen all network interfaces
-# if this parameter is missing.
-#ListenIP=127.0.0.1
-
-# How often ZABBIX will perform sending hearbeat message
-# (in seconds)
-# Default value is 60 seconds
-# Set to 0 to disable heartbeat messages
-# This parameter must be between 0 and 3600
-#HeartbeatFrequency=60
-
-# How often ZABBIX will perform sync configuration data
-# (in seconds)
-# Default value is 3600 seconds (1h)
-# This parameter must be between 1 and 604800 (1 week)
-#ConfigFrequency=3600
-
-# How often ZABBIX will perform housekeeping procedure
-# (in hours)
-# Default value is 1 hour
-# Housekeeping is removing unnecessary information from
-# tables history, alert, and alarms
-# This parameter must be between 1 and 24
-#HousekeepingFrequency=1
-
-# How often ZABBIX will try to send unsent alerts
-# (in seconds)
-# Default value is 30 seconds
-#SenderFrequency=30
-
-# Local bufer size in hours. Proxy will keep collected data N hours.
-# Default value is 0 hours
-#ProxyLocalBuffer=0
-
-# Offline buffer size in hours. It is used when server is not available.
-# Older data is removed.
-# Default value is 1 hours
-#ProxyOfflineBuffer=1
-
-# Specifies debug level
-# 0 - debug is not created
-# 1 - critical information
-# 2 - error information
-# 3 - warnings (default)
-# 4 - for debugging (produces lots of information)
-#DebugLevel=3
-
-# Specifies how long we wait for agent response (in sec)
-# Must be between 1 and 30 
-Timeout=5
-
-# Specifies how many seconds trapper may spend processing new data
-# Must be between 1 and 30 
-#TrapperTimeout=5
-
-# After how many seconds of unreachability treat a host as unavailable
-#UnreachablePeriod=45
-
-# How ofter check host for availability during the unreachability period
-#UnavailableDelay=15
-
-# How ofter check host for availability during the unavailability period
-#UnavailableDelay=60
-
-# Name of PID file
-PidFile=/var/run/zabbix/zabbix_proxy.pid
+### Option: ServerPort
+#	Port of Zabbix trapper on Zabbix server.
+#	For a proxy in the passive mode this parameter will be ignored.
+#
+# Mandatory: no
+# Range: 1024-32767
+# Default:
+# ServerPort=10051
+
+### Option: Hostname
+#	Unique, case sensitive Proxy name. Make sure the Proxy name is known to the server!
+#	Value is acquired from HostnameItem if undefined.
+#
+# Mandatory: no
+# Default:
+# Hostname=
+
+Hostname=Zabbix proxy
+
+### Option: HostnameItem
+#	Item used for generating Hostname if it is undefined.
+#	Ignored if Hostname is defined.
+#
+# Mandatory: no
+# Default:
+# HostnameItem=system.hostname
+
+### Option: ListenPort
+#	Listen port for trapper.
+#
+# Mandatory: no
+# Range: 1024-32767
+# Default:
+# ListenPort=10051
+
+### Option: SourceIP
+#	Source IP address for outgoing connections.
+#
+# Mandatory: no
+# Default:
+# SourceIP=
+
+### Option: LogFile
+#	Name of log file.
+#	If not set, syslog is used.
+#
+# Mandatory: no
+# Default:
+# LogFile=
 
-# Name of log file
-# If not set, syslog is used
 LogFile=/var/log/zabbix/zabbix_proxy.log
 
-# Maximum size of log file in MB. Set to 0 to disable automatic log rotation.
-LogFileSize=1
-
-# Location for custom alert scripts
-AlertScriptsPath=/home/zabbix/bin/
-
-# Location of external scripts
-#ExternalScripts=/etc/zabbix/externalscripts
-
-# Location of 'fping. Default is /usr/sbin/fping
-# Make sure that fping binary has root permissions and SUID flag set
-#FpingLocation=/usr/sbin/fping
-
-# Location of fping6. Default is /usr/sbin/fping6
-# Make sure that fping binary has root permissions and SUID flag set
-#Fping6Location=/usr/sbin/fping6
-
-# Temporary directory. Default is /tmp
-#TmpDir=/tmp
-
-# Frequency of ICMP pings (item keys 'icmpping' and 'icmppingsec'). Defauls is 60 seconds.
-#PingerFrequency=60
+### Option: LogFileSize
+#	Maximum size of log file in MB.
+#	0 - disable automatic log rotation.
+#
+# Mandatory: no
+# Range: 0-1024
+# Default:
+# LogFileSize=1
+
+### Option: DebugLevel
+#	Specifies debug level
+#	0 - basic information about starting and stopping of Zabbix processes
+#	1 - critical information
+#	2 - error information
+#	3 - warnings
+#	4 - for debugging (produces lots of information)
+#
+# Mandatory: no
+# Range: 0-4
+# Default:
+# DebugLevel=3
+
+### Option: PidFile
+#	Name of PID file.
+#
+# Mandatory: no
+# Default:
+# PidFile=/tmp/zabbix_proxy.pid
 
-# Database host name
-# Default is localhost
-
-#DBHost=localhost
-
-# Database name
-# SQLite3 note: path to database file must be provided. DBUser and DBPassword are ignored.
-DBName=proxy
+PidFile=/var/run/zabbix/zabbix_proxy.pid
 
-# Database user
+### Option: DBHost
+#	Database host name.
+#	If set to localhost, socket is used for MySQL.
+#	If set to empty string, socket is used for PostgreSQL.
+#
+# Mandatory: no
+# Default:
+# DBHost=localhost
+
+### Option: DBName
+#	Database name.
+#	For SQLite3 path to database file must be provided. DBUser and DBPassword are ignored.
+#	Warning: do not attempt to use the same database Zabbix server is using.
+#
+# Mandatory: yes
+# Default:
+# DBName=
+
+DBName=zabbix_proxy
+
+### Option: DBSchema
+#	Schema name. Used for IBM DB2 and PostgreSQL.
+#
+# Mandatory: no
+# Default:
+# DBSchema=
+
+### Option: DBUser
+#	Database user. Ignored for SQLite.
+#
+# Default:
+# DBUser=
 
 DBUser=root
 
-# Database password
-# Comment this line if no password used
-
-#DBPassword=<password>
-
-# Connect to MySQL using Unix socket?
-
-#DBSocket=/tmp/mysql.sock
+### Option: DBPassword
+#	Database password. Ignored for SQLite.
+#	Comment this line if no password is used.
+#
+# Mandatory: no
+# Default:
+# DBPassword=
+
+### Option: DBSocket
+#	Path to MySQL socket.
+#
+# Mandatory: no
+# Default:
+# DBSocket=/tmp/mysql.sock
+
+# Option: DBPort
+#	Database port when not using local socket. Ignored for SQLite.
+#
+# Mandatory: no
+# Default (for MySQL):
+# DBPort=3306
+
+######### PROXY SPECIFIC PARAMETERS #############
+
+### Option: ProxyLocalBuffer
+#	Proxy will keep data locally for N hours, even if the data have already been synced with the server.
+#	This parameter may be used if local data will be used by third party applications.
+#
+# Mandatory: no
+# Range: 0-720
+# Default:
+# ProxyLocalBuffer=0
+
+### Option: ProxyOfflineBuffer
+#	Proxy will keep data for N hours in case if no connectivity with Zabbix Server.
+#	Older data will be lost.
+#
+# Mandatory: no
+# Range: 1-720
+# Default:
+# ProxyOfflineBuffer=1
+
+### Option: HeartbeatFrequency
+#	Frequency of heartbeat messages in seconds.
+#	Used for monitoring availability of Proxy on server side.
+#	0 - heartbeat messages disabled.
+#	For a proxy in the passive mode this parameter will be ignored.
+#
+# Mandatory: no
+# Range: 0-3600
+# Default:
+# HeartbeatFrequency=60
+
+### Option: ConfigFrequency
+#	How often proxy retrieves configuration data from Zabbix Server in seconds.
+#	For a proxy in the passive mode this parameter will be ignored.
+#
+# Mandatory: no
+# Range: 1-3600*24*7
+# Default:
+# ConfigFrequency=3600
+
+### Option: DataSenderFrequency
+#	Proxy will send collected data to the Server every N seconds.
+#	For a proxy in the passive mode this parameter will be ignored.
+#
+# Mandatory: no
+# Range: 1-3600
+# Default:
+# DataSenderFrequency=1
+
+############ ADVANCED PARAMETERS ################
+
+### Option: StartPollers
+#	Number of pre-forked instances of pollers.
+#
+# Mandatory: no
+# Range: 0-1000
+# Default:
+# StartPollers=5
+
+### Option: StartIPMIPollers
+#	Number of pre-forked instances of IPMI pollers.
+#
+# Mandatory: no
+# Range: 0-1000
+# Default:
+# StartIPMIPollers=0
+
+### Option: StartPollersUnreachable
+#	Number of pre-forked instances of pollers for unreachable hosts (including IPMI and Java).
+#	At least one poller for unreachable hosts must be running if regular, IPMI or Java pollers
+#	are started.
+#
+# Mandatory: no
+# Range: 0-1000
+# Default:
+# StartPollersUnreachable=1
+
+### Option: StartTrappers
+#	Number of pre-forked instances of trappers.
+#	Trappers accept incoming connections from Zabbix sender and active agents.
+#
+# Mandatory: no
+# Range: 0-1000
+# Default:
+# StartTrappers=5
+
+### Option: StartPingers
+#	Number of pre-forked instances of ICMP pingers.
+#
+# Mandatory: no
+# Range: 0-1000
+# Default:
+# StartPingers=1
+
+### Option: StartDiscoverers
+#	Number of pre-forked instances of discoverers.
+#
+# Mandatory: no
+# Range: 0-250
+# Default:
+# StartDiscoverers=1
+
+### Option: StartHTTPPollers
+#	Number of pre-forked instances of HTTP pollers.
+#
+# Mandatory: no
+# Range: 0-1000
+# Default:
+# StartHTTPPollers=1
+
+### Option: JavaGateway
+#	IP address (or hostname) of Zabbix Java gateway.
+#	Only required if Java pollers are started.
+#
+# Mandatory: no
+# Default:
+# JavaGateway=
+
+### Option: JavaGatewayPort
+#	Port that Zabbix Java gateway listens on.
+#
+# Mandatory: no
+# Range: 1024-32767
+# Default:
+# JavaGatewayPort=10052
+
+### Option: StartJavaPollers
+#	Number of pre-forked instances of Java pollers.
+#
+# Mandatory: no
+# Range: 0-1000
+# Default:
+# StartJavaPollers=0
+
+### Option: StartVMwareCollectors
+#	Number of pre-forked vmware collector instances.
+#
+# Mandatory: no
+# Range: 0-250
+# Default:
+# StartVMwareCollectors=0
+
+### Option: VMwareFrequency
+#	How often Zabbix will connect to VMware service to obtain a new data.
+#
+# Mandatory: no
+# Range: 10-86400
+# Default:
+# VMwareFrequency=60
+
+### Option: VMwareCacheSize
+#	Size of VMware cache, in bytes.
+#	Shared memory size for storing VMware data.
+#	Only used if VMware collectors are started.
+#
+# Mandatory: no
+# Range: 256K-2G
+# Default:
+# VMwareCacheSize=8M
+
+### Option: SNMPTrapperFile
+#	Temporary file used for passing data from SNMP trap daemon to the proxy.
+#	Must be the same as in zabbix_trap_receiver.pl or SNMPTT configuration file.
+#
+# Mandatory: no
+# Default:
+# SNMPTrapperFile=/tmp/zabbix_traps.tmp
+
+### Option: StartSNMPTrapper
+#	If 1, SNMP trapper process is started.
+#
+# Mandatory: no
+# Range: 0-1
+# Default:
+# StartSNMPTrapper=0
+
+### Option: ListenIP
+#	List of comma delimited IP addresses that the trapper should listen on.
+#	Trapper will listen on all network interfaces if this parameter is missing.
+#
+# Mandatory: no
+# Default:
+# ListenIP=0.0.0.0
+
+### Option: HousekeepingFrequency
+#	How often Zabbix will perform housekeeping procedure (in hours).
+#	Housekeeping is removing outdated information from the database.
+#	To prevent Housekeeper from being overloaded, no more than 4 times HousekeepingFrequency
+#	hours of outdated information are deleted in one housekeeping cycle.
+#	To lower load on proxy startup housekeeping is postponed for 30 minutes after proxy start.
+#
+# Mandatory: no
+# Range: 1-24
+# Default:
+# HousekeepingFrequency=1
+
+### Option: CacheSize
+#	Size of configuration cache, in bytes.
+#	Shared memory size, for storing hosts and items data.
+#
+# Mandatory: no
+# Range: 128K-8G
+# Default:
+# CacheSize=8M
+
+### Option: StartDBSyncers
+#	Number of pre-forked instances of DB Syncers
+#
+# Mandatory: no
+# Range: 1-100
+# Default:
+# StartDBSyncers=4
+
+### Option: HistoryCacheSize
+#	Size of history cache, in bytes.
+#	Shared memory size for storing history data.
+#
+# Mandatory: no
+# Range: 128K-2G
+# Default:
+# HistoryCacheSize=8M
+
+### Option: HistoryTextCacheSize
+#	Size of text history cache, in bytes.
+#	Shared memory size for storing character, text or log history data.
+#
+# Mandatory: no
+# Range: 128K-2G
+# Default:
+# HistoryTextCacheSize=16M
+
+### Option: Timeout
+#	Specifies how long we wait for agent, SNMP device or external check (in seconds).
+#
+# Mandatory: no
+# Range: 1-30
+# Default:
+# Timeout=3
+
+### Option: TrapperTimeout
+#	Specifies how many seconds trapper may spend processing new data.
+#
+# Mandatory: no
+# Range: 1-300
+# Default:
+# TrapperTimeout=300
+
+### Option: UnreachablePeriod
+#	After how many seconds of unreachability treat a host as unavailable.
+#
+# Mandatory: no
+# Range: 1-3600
+# Default:
+# UnreachablePeriod=45
+
+### Option: UnavailableDelay
+#	How often host is checked for availability during the unavailability period, in seconds.
+#
+# Mandatory: no
+# Range: 1-3600
+# Default:
+# UnavailableDelay=60
+
+### Option: UnreachableDelay
+#	How often host is checked for availability during the unreachability period, in seconds.
+#
+# Mandatory: no
+# Range: 1-3600
+# Default:
+# UnreachableDelay=15
+
+### Option: ExternalScripts
+#	Full path to location of external scripts.
+#	Default depends on compilation options.
+#
+# Mandatory: no
+# Default:
+# ExternalScripts=${datadir}/zabbix/externalscripts
+
+### Option: FpingLocation
+#	Location of fping.
+#	Make sure that fping binary has root ownership and SUID flag set.
+#
+# Mandatory: no
+# Default:
+# FpingLocation=/usr/sbin/fping
+
+### Option: Fping6Location
+#	Location of fping6.
+#	Make sure that fping6 binary has root ownership and SUID flag set.
+#	Make empty if your fping utility is capable to process IPv6 addresses.
+#
+# Mandatory: no
+# Default:
+# Fping6Location=/usr/sbin/fping6
+
+### Option: SSHKeyLocation
+#	Location of public and private keys for SSH checks and actions.
+#
+# Mandatory: no
+# Default:
+# SSHKeyLocation=
+
+### Option: LogSlowQueries
+#	How long a database query may take before being logged (in milliseconds).
+#	Only works if DebugLevel set to 3 or 4.
+#	0 - don't log slow queries.
+#
+# Mandatory: no
+# Range: 1-3600000
+# Default:
+# LogSlowQueries=0
+
+### Option: TmpDir
+#	Temporary directory.
+#
+# Mandatory: no
+# Default:
+# TmpDir=/tmp
+
+### Option: AllowRoot
+#	Allow the proxy to run as 'root'. If disabled and the proxy is started by 'root', the proxy
+#	will try to switch to the user specified by the User configuration option instead.
+#	Has no effect if started under a regular user.
+#	0 - do not allow
+#	1 - allow
+#
+# Mandatory: no
+# Default:
+# AllowRoot=0
+
+### Option: User
+#	Drop privileges to a specific, existing user on the system.
+#	Only has effect if run as 'root' and AllowRoot is disabled.
+#
+# Mandatory: no
+# Default:
+# User=zabbix
+
+### Option: Include
+#	You may include individual files or all files in a directory in the configuration file.
+#	Installing Zabbix will create include directory in /usr/local/etc, unless modified during the compile time.
+#
+# Mandatory: no
+# Default:
+# Include=
+
+# Include=/usr/local/etc/zabbix_proxy.general.conf
+# Include=/usr/local/etc/zabbix_proxy.conf.d/
+# Include=/usr/local/etc/zabbix_proxy.conf.d/*.conf
+
+### Option: SSLCertLocation
+#	Location of SSL client certificates.
+#	This parameter is used only in web monitoring.
+#
+# Mandatory: no
+# Default:
+# SSLCertLocation=${datadir}/zabbix/ssl/certs
+
+### Option: SSLKeyLocation
+#	Location of private keys for SSL client certificates.
+#	This parameter is used only in web monitoring.
+#
+# Mandatory: no
+# Default:
+# SSLKeyLocation=${datadir}/zabbix/ssl/keys
+
+### Option: SSLCALocation
+#	Location of certificate authority (CA) files for SSL server certificate verification.
+#	If not set, system-wide directory will be used.
+#	This parameter is used only in web monitoring.
+#
+# Mandatory: no
+# Default:
+# SSLCALocation=
+
+####### LOADABLE MODULES #######
+
+### Option: LoadModulePath
+#	Full path to location of proxy modules.
+#	Default depends on compilation options.
+#
+# Mandatory: no
+# Default:
+# LoadModulePath=${libdir}/modules
+
+### Option: LoadModule
+#	Module to load at proxy startup. Modules are used to extend functionality of the proxy.
+#	Format: LoadModule=<module.so>
+#	The modules must be located in directory specified by LoadModulePath.
+#	It is allowed to include multiple LoadModule parameters.
+#
+# Mandatory: no
+# Default:
+# LoadModule=
-- 
2.2.1



---
Unsubscribe:  alpine-aports+unsubscribe@lists.alpinelinux.org
Help:         alpine-aports+help@lists.alpinelinux.org
---