created zabbix-agent subpackage, added default config, bumped pkgrel
ref #251
---
testing/zabbix/APKBUILD | 24 +++-
testing/zabbix/zabbix-agent.pre-install | 5 +
testing/zabbix/zabbix_agentd.conf | 230 +++++++++++++++++++++++++++++++
3 files changed, 256 insertions(+), 3 deletions(-)
create mode 100644 testing/zabbix/zabbix-agent.pre-install
create mode 100644 testing/zabbix/zabbix_agentd.conf
diff --git a/testing/zabbix/APKBUILD b/testing/zabbix/APKBUILD
index 9c60123..2c28099 100644
--- a/testing/zabbix/APKBUILD
+++ b/testing/zabbix/APKBUILD
@@ -2,7 +2,7 @@
# Maintainer: Natanael Copa <natanael.copa@gmail.com>
pkgname=zabbix
pkgver=1.8.3
-pkgrel=0
+pkgrel=1
pkgdesc="Enterprise-class open source distributed monitoring"
url="www.zabbix.com"
license="GPL"
@@ -11,11 +11,12 @@ makedepends="postgresql-dev curl-dev libiconv-dev net-snmp-dev"
install="$pkgname.pre-install"
pkgusers="zabbix"
pkggroups="zabbix"
-subpackages="$pkgname-doc"
+subpackages="$pkgname-doc $pkgname-agent"
source="http://downloads.sourceforge.net/$pkgname/$pkgname-$pkgver.tar.gz
zabbix_server.conf
zabbix_trapper.conf
zabbix_proxy.conf
+ zabbix_agentd.conf
zabbix-dn_skipname.patch
zabbix-getloadavg.patch
zabbix-server.initd
@@ -71,17 +72,34 @@ package() {
install -D -m0755 "$srcdir"/zabbix-$pkgver/create/schema/postgresql.sql "$pkgdir"/usr/share/zabbix/dbms/create/postgresql.sql
cp -r "$srcdir"/zabbix-$pkgver/frontends/php/* "$_wwwdir"
- for i in server proxy agentd; do
+ for i in server proxy; do
install -D -m0755 "$srcdir"/zabbix-$i.initd \
"$pkgdir"/etc/init.d/zabbix-$i || return 1
done
}
+agent() {
+ pkgdesc="Zabbix Network Monitoring Agent"
+ depends=
+ install="$subpkgname.pre-install"
+
+ install -d -m0750 -o zabbix -g zabbix \
+ "$subpkgdir"/var/run/zabbix "$subpkgdir"/var/log/zabbix
+
+ install -d "$subpkgdir"/etc/zabbix
+ install -D -m0644 "$srcdir"/zabbix_agentd.conf "$subpkgdir"/etc/zabbix/zabbix_agentd.conf
+ install -D -m0755 "$srcdir"/zabbix-agentd.initd "$subpkgdir"/etc/init.d/zabbix-agentd
+
+ mkdir -p "$subpkgdir"/usr/sbin
+ mv -f "$pkgdir"/usr/sbin/zabbix_agentd "$subpkgdir"/usr/sbin/
+}
+
md5sums="575c31880d73f6fe41e730874ebfc633 zabbix-1.8.3.tar.gz
26b0401a83bdb1dce29338e5b2786620 zabbix_server.conf
9832a81e134c8e2c11e2a06b7adbf88f zabbix_trapper.conf
0310b92afb3f35c1075fff53db737212 zabbix_proxy.conf
+0fe55827fe49424a9f59fd43cc905ae1 zabbix_agentd.conf
d13166483792401be2d25b37b0170b82 zabbix-dn_skipname.patch
8d1d2e53479173aac0df0c38a4d6afda zabbix-getloadavg.patch
e42394e798ab98a8ff4babe68e04633a zabbix-server.initd
diff --git a/testing/zabbix/zabbix-agent.pre-install b/testing/zabbix/zabbix-agent.pre-install
new file mode 100644
index 0000000..8a9e519
--- /dev/null
+++ b/testing/zabbix/zabbix-agent.pre-install
@@ -0,0 +1,5 @@
+#!/bin/sh
+
+addgroup zabbix 2>/dev/null
+adduser -S -H -h /dev/null -s /bin/false -D -G zabbix zabbix 2>/dev/null
+exit 0
diff --git a/testing/zabbix/zabbix_agentd.conf b/testing/zabbix/zabbix_agentd.conf
new file mode 100644
index 0000000..8b56407
--- /dev/null
+++ b/testing/zabbix/zabbix_agentd.conf
@@ -0,0 +1,230 @@
+# This is a config file for Zabbix Agent (Unix)
+# To get more information about Zabbix, visit http://www.zabbix.com
+
+############ GENERAL PARAMETERS #################
+
+### Option: PidFile
+# Name of PID file.
+#
+# Mandatory: no
+# Default:
+PidFile=/var/run/zabbix/zabbix_agentd.pid
+
+### Option: LogFile
+# Name of log file.
+# If not set, syslog is used.
+#
+# Mandatory: no
+# Default:
+# LogFile=
+
+LogFile=/var/log/zabbix/zabbix_agentd.log
+
+### Option: LogFileSize
+# Maximum size of log file in MB.
+# 0 - disable automatic log rotation.
+#
+# Mandatory: no
+# Range: 0-1024
+# Default:
+# LogFileSize=1
+
+### Option: DebugLevel
+# Specifies debug level
+# 0 - no debug
+# 1 - critical information
+# 2 - error information
+# 3 - warnings
+# 4 - for debugging (produces lots of information)
+#
+# Mandatory: no
+# Range: 0-4
+# Default:
+# DebugLevel=3
+
+### Option: SourceIP
+# Source IP address for outgoing connections.
+#
+# Mandatory: no
+# Default:
+# SourceIP=
+
+### Option: EnableRemoteCommands
+# Whether remote commands from Zabbix server are allowed.
+# 0 - not allowed
+# 1 - allowed
+#
+# Mandatory: no
+# Default:
+# EnableRemoteCommands=0
+
+### Option: LogRemoteCommands
+# Enable logging of executed shell commands as warnings
+# 0 - disabled
+# 1 - enabled
+#
+# Mandatory: no
+# Default:
+# LogRemoteCommands=0
+
+##### Passive checks related
+
+### Option: Server
+# List of comma delimited IP addresses (or hostnames) of Zabbix servers.
+# No spaces allowed. First entry is used for receiving list of and sending active checks.
+# Note that hostnames must resolve hostname->IP address and IP address->hostname.
+# If IPv6 support is enabled then '127.0.0.1', '::127.0.0.1', '::ffff:127.0.0.1' are treated equally.
+#
+# Mandatory: yes
+# Default:
+# Server=
+
+Server=
+
+### Option: Hostname
+# Unique, case sensitive hostname.
+# Required for active checks and must match hostname as configured on the server.
+#
+# Default:
+# Hostname=system.uname
+
+Hostname=
+
+### Option: ListenPort
+# Agent will listen on this port for connections from the server.
+#
+# Mandatory: no
+# Range: 1024-32767
+# Default:
+# ListenPort=10050
+
+### Option: ListenIP
+# List of comma delimited IP addresses that the agent should listen on.
+#
+# Mandatory: no
+# Default:
+# ListenIP=0.0.0.0
+
+# ListenIP=127.0.0.1
+
+### Option: DisablePassive
+# Disable passive checks. The agent will not listen on any TCP port.
+# Only active checks will be processed.
+# 0 - do not disable
+# 1 - disable
+#
+# Mandatory: no
+# Default:
+# DisablePassive=0
+
+##### Active checks related
+
+### Option: DisableActive
+# Disable active checks. The agent will work in passive mode listening for server.
+#
+# Mandatory: no
+# Default:
+# DisableActive=0
+
+# DisableActive=1
+
+### Option: ServerPort
+# Server port for retrieving list of and sending active checks.
+#
+# Mandatory: no
+# Default:
+# ServerPort=10051
+
+### Option: RefreshActiveChecks
+# How often list of active checks is refreshed, in seconds.
+#
+# Mandatory: no
+# Range: 60-3600
+# Default:
+# RefreshActiveChecks=120
+
+### Option: BufferSend
+# Do not keep data longer than N seconds in buffer.
+#
+# Mandatory: no
+# Range: 1-3600
+# Default:
+# BufferSend=5
+
+### Option: BufferSize
+# Maximum number of values in a memory buffer. The agent will send
+# all collected data to Zabbix Server or Proxy if the buffer is full.
+#
+# Mandatory: no
+# Range: 2-65535
+# Default:
+# BufferSize=100
+
+### Option: MaxLinesPerSecond
+# Maximum number of new lines the agent will send per second to Zabbix Server
+# or Proxy processing 'log' and 'logrt' active checks.
+# The provided value will be overridden by the parameter 'maxlines',
+# provided in 'log' or 'logrt' item keys.
+#
+# Mandatory: no
+# Range: 1-1000
+# Default:
+# MaxLinesPerSecond=100
+
+
+############ ADVANCED PARAMETERS #################
+
+### Option: StartAgents
+# Number of pre-forked instances of zabbix_agentd that process passive checks.
+#
+# Mandatory: no
+# Range: 1-16
+# Default:
+# StartAgents=3
+
+### Option: Timeout
+# Spend no more than Timeout seconds on processing
+#
+# Mandatory: no
+# Range: 1-30
+# Default:
+# Timeout=3
+
+### Option: Include
+# You may include individual files or all files in a directory in the configuration file.
+#
+# Mandatory: no
+# Default:
+# Include=
+
+# Include=/etc/zabbix/zabbix_agent.userparams.conf
+# Include=/etc/zabbix/zabbix_agentd/
+
+
+####### USER-DEFINED MONITORED PARAMETERS #######
+
+### Option: UnsafeUserParameters
+# Allow all characters to be passed in arguments to user-defined parameters.
+# 0 - do not allow
+# 1 - allow
+#
+# Mandatory: no
+# Range: 0-1
+# Default:
+# UnsafeUserParameters=0
+
+### Option: UserParameter
+# User-defined parameter to monitor. There can be several user-defined parameters.
+# Format: UserParameter=<key>,<shell command>
+# Note that shell command must not return empty string or EOL only.
+# Example: UserParameter=system.test,who|wc -l
+#UserParameter=system.test,who|wc -l
+### Set of parameters for monitoring MySQL server (v3.23.42 and later)
+### Change -u<username> and add -p<password> if required
+#UserParameter=mysql.ping,mysqladmin -uroot ping|grep alive|wc -l
+#UserParameter=mysql.uptime,mysqladmin -uroot status|cut -f2 -d":"|cut -f1 -d"T"
+#UserParameter=mysql.threads,mysqladmin -uroot status|cut -f3 -d":"|cut -f1 -d"Q"
+#UserParameter=mysql.questions,mysqladmin -uroot status|cut -f4 -d":"|cut -f1 -d"S"
+#UserParameter=mysql.slowqueries,mysqladmin -uroot status|cut -f5 -d":"|cut -f1 -d"O"
+#UserParameter=mysql.qps,mysqladmin -uroot status|cut -f9 -d":"
+#UserParameter=mysql.version,mysql -V
--
1.7.3.2
---
Unsubscribe: alpine-devel+unsubscribe@lists.alpinelinux.org
Help: alpine-devel+help@lists.alpinelinux.org
---