X-Original-To: alpine-aports@mail.alpinelinux.org Delivered-To: alpine-aports@mail.alpinelinux.org Received: from mail.alpinelinux.org (dallas-a1.alpinelinux.org [127.0.0.1]) by mail.alpinelinux.org (Postfix) with ESMTP id F1CBADCCA65 for ; Sun, 18 Oct 2015 21:52:07 +0000 (UTC) Received: from lithium.8pit.net (lithium.8pit.net [141.101.32.65]) (using TLSv1 with cipher ECDHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by mail.alpinelinux.org (Postfix) with ESMTPS id E9FACDCAB2E; Sun, 18 Oct 2015 21:52:06 +0000 (UTC) Received: from localhost (ip5f5ac969.dynamic.kabel-deutschland.de [95.90.201.105]); by lithium.8pit.net (OpenSMTPD) with ESMTPSA id 48f31e39; TLS version=TLSv1/SSLv3 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NO; Sun, 18 Oct 2015 23:52:03 +0200 (CEST) From: =?UTF-8?q?S=C3=B6ren=20Tempel?= To: alpine-aports@lists.alpinelinux.org Subject: [alpine-aports] [PATCH 4/6] main/wpa_supplicant: use a config file based on defconfig Date: Sun, 18 Oct 2015 23:51:39 +0200 Message-Id: <1445205101-30506-4-git-send-email-soeren+git@soeren-tempel.net> X-Mailer: git-send-email 2.6.1 In-Reply-To: <1445205101-30506-1-git-send-email-soeren+git@soeren-tempel.net> References: <1445205101-30506-1-git-send-email-soeren+git@soeren-tempel.net> X-Virus-Scanned: ClamAV using ClamSMTP X-Mailinglist: alpine-aports Precedence: list List-Id: Alpine Development List-Unsubscribe: List-Post: List-Help: List-Subscribe: The defconfig file can be found in the wpa_supplicant source tree in the wpa_supplicant/ directory. It should contain all options that where enabled before with one exception: Options that are no longer available have been removed. --- main/wpa_supplicant/APKBUILD | 91 +------- main/wpa_supplicant/config | 497 +++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 506 insertions(+), 82 deletions(-) create mode 100644 main/wpa_supplicant/config diff --git a/main/wpa_supplicant/APKBUILD b/main/wpa_supplicant/APKBUILD index 375bc70..cb36a4e 100644 --- a/main/wpa_supplicant/APKBUILD +++ b/main/wpa_supplicant/APKBUILD @@ -2,14 +2,14 @@ # Maintainer: Natanael Copa pkgname=wpa_supplicant pkgver=2.4 -pkgrel=4 +pkgrel=5 pkgdesc="A utility providing key negotiation for WPA wireless networks" url="https://w1.fi/wpa_supplicant/" arch="all" license="BSD" subpackages="$pkgname-doc $pkgname-gui" depends="dbus" -makedepends="openssl-dev dbus-dev libnl3-dev qt-dev" +makedepends="openssl-dev dbus-dev libnl3-dev qt-dev readline-dev pcsc-lite-dev" source="http://w1.fi/releases/$pkgname-$pkgver.tar.gz CVE-2015-1863.patch CVE-2015-4141.patch @@ -23,8 +23,8 @@ source="http://w1.fi/releases/$pkgname-$pkgver.tar.gz wpa_supplicant.initd wpa_supplicant.confd - wpa_cli.sh - " + config + wpa_cli.sh" _builddir="$srcdir"/$pkgname-$pkgver prepare() { @@ -35,84 +35,8 @@ prepare() { esac done - cd "$_builddir"/wpa_supplicant - # Toolchain setup - echo "CC = ${CC:-gcc}" > .config - - # Basic setup - echo "CONFIG_CTRL_IFACE=y" >> .config - # dbus support - echo "CONFIG_CTRL_IFACE_DBUS=y" >> .config - echo "CONFIG_CTRL_IFACE_DBUS_NEW=y" >> .config - echo "CONFIG_CTRL_IFACE_DBUS_INTRO=y" >> .config - - echo "CONFIG_BACKEND=file" >> .config - - # Basic authentication methods - # NOTE: we don't set GPSK or SAKE as they conflict - # with the below options - echo "CONFIG_EAP_GTC=y" >> .config - echo "CONFIG_EAP_MD5=y" >> .config - echo "CONFIG_EAP_OTP=y" >> .config - echo "CONFIG_EAP_PAX=y" >> .config - echo "CONFIG_EAP_PSK=y" >> .config - echo "CONFIG_EAP_TLV=y" >> .config - echo "CONFIG_IEEE8021X_EAPOL=y" >> .config - echo "CONFIG_PKCS12=y" >> .config - echo "CONFIG_PEERKEY=y" >> .config - echo "CONFIG_EAP_LEAP=y" >> .config - echo "CONFIG_EAP_MSCHAPV2=y" >> .config - echo "CONFIG_EAP_PEAP=y" >> .config - echo "CONFIG_EAP_TLS=y" >> .config - echo "CONFIG_EAP_TTLS=y" >> .config - - # debug - # echo "CONFIG_DEBUG_FILE=y" >> .config - - # Smart card authentication - #echo "CONFIG_EAP_SIM=y" >> .config - #echo "CONFIG_EAP_AKA=y" >> .config - #echo "CONFIG_EAP_AKA_PRIME=y" >> .config - #echo "CONFIG_PCSC=y" >> .config - - # readline/history support for wpa_cli - #echo "CONFIG_READLINE=y" >> .config - - # SSL authentication methods - echo "CONFIG_TLS=openssl" >> .config - echo "CONFIG_SMARTCARD=y" >> .config - # use gnutls - # echo "CONFIG_TLS=gnutls" >> .config - # echo "CONFIG_GNUTLS_EXTRA=y" >> .config - #echo "CONFIG_TLS=internal" >> .config - - # Linux specific drivers - echo "CONFIG_DRIVER_ATMEL=y" >> .config - #echo "CONFIG_DRIVER_BROADCOM=y" >> .config - #echo "CONFIG_DRIVER_HERMES=y" >> .config - echo "CONFIG_DRIVER_HOSTAP=y" >> .config - echo "CONFIG_DRIVER_IPW=y" >> .config - echo "CONFIG_DRIVER_NDISWRAPPER=y" >> .config - echo "CONFIG_DRIVER_NL80211=y" >> .config - #echo "CONFIG_DRIVER_PRISM54=y" >> .config - echo "CONFIG_DRIVER_RALINK=y" >> .config - echo "CONFIG_DRIVER_WEXT=y" >> .config - echo "CONFIG_DRIVER_WIRED=y" >> .config - - # Add include path for madwifi-driver headers - #echo "CFLAGS += -I/usr/include/madwifi" >> .config - #echo "CONFIG_DRIVER_MADWIFI=y" >> .config - - # Wi-Fi Protected Setup (WPS) - echo "CONFIG_WPS=y" >> .config - - # Enable mitigation against certain attacks against TKIP - echo "CONFIG_DELAYED_MIC_ERROR_REPORT=y" >> .config - - echo "CONFIG_WPS2=y" >> .config - echo "CONFIG_AP=y" >> .config - echo "CONFIG_P2P=y" >> .config - echo "CONFIG_LIBNL32=y" >> .config + # Copy our configuration file to the build directory + cp "$srcdir"/config "$_builddir"/wpa_supplicant/.config || return 1 } build() { @@ -174,6 +98,7 @@ de0fca4d74a1883d15ef5754f13a5226 0004-EAP-pwd-server-Fix-Total-Length-parsing-f 9d854969af23b207f9f3dff38ef78770 0005-EAP-pwd-peer-Fix-asymmetric-fragmentation-behavior.patch a8da41f58b8b4779d666ab7bd8233c18 wpa_supplicant.initd bc117427f2c538439f3f1481a028ee06 wpa_supplicant.confd +6cd644ff923d56cfc4b88c5afe9f1061 config 707c26fbf3fa46a6410732efa7128eee wpa_cli.sh" sha256sums="058dc832c096139a059e6df814080f50251a8d313c21b13364c54a1e70109122 wpa_supplicant-2.4.tar.gz a3abf75801f02199ff48c316a7b6598860e6ca20ce2fe79b0bec873905e5c8a4 CVE-2015-1863.patch @@ -186,6 +111,7 @@ c28ca6303a562809dfd1812f9b918808b3b0f0c52cc43070fd1777e1cfc88f18 0004-EAP-pwd-s 04ef66fbd5b2167274cd7123d7f7252963b9a9c1ec2f5edf6558a6ad92d47689 0005-EAP-pwd-peer-Fix-asymmetric-fragmentation-behavior.patch 5d6ee43b7752d15013fb31298087e9d82caa2568064e59e6ed6230d7de403867 wpa_supplicant.initd 61ec59007f66ac5bacc0aa095d1f2ccbc977a687038e161a463d1727223d5a90 wpa_supplicant.confd +480bdbe48e49af04531f38d7b7df0642010b346d613cfa6479e8fa8f17781bb4 config dec1d357d8db5067bdba39a300760b06667a6d1b59f15fdb93063d61bf11b596 wpa_cli.sh" sha512sums="03d8199325b3910f77013ddb7edd803ab4444542230484e1cb465dc3df9372b39ee3307d823ce88730e8f5a5231ef3183954c54cf07297b70432f526e45aac2b wpa_supplicant-2.4.tar.gz 61f90d06bd42fb7ea17ba147db861303f5b1fdce2cda35492cec578214da5ea5d654a1df99dee4d4a0c07ef3e8b3bfb65ab4b98eff21c2013adf536766136ce1 CVE-2015-1863.patch @@ -198,4 +124,5 @@ b752f91c3d6dcf0784d9cb20a0c7f8de6c837c38ff62cf77b136d9b818890b13f55eeed1d6097f24 07a21f0cc7d00e17bed8ef5ced36159020a410a4606aa0ca24e47223835ab0cc5fbeed3075c4f17d2ce1aee437eedf9fea8f4b95252b2fa255d54a195637cb6f 0005-EAP-pwd-peer-Fix-asymmetric-fragmentation-behavior.patch cfe9de2813d5ec778c7f5cb404c23aad371dee9922dea172358a8ea95ab4e5dd01a3b9fc1a452dd3c3c9a2f02e8b12ffe162b69767f95faa18480fb79499301b wpa_supplicant.initd 29103161ec2b9631fca9e8d9a97fafd60ffac3fe78cf613b834395ddcaf8be1e253c22e060d7d9f9b974b2d7ce794caa932a2125e29f6494b75bce475f7b30e1 wpa_supplicant.confd +9fb1abc36c65a0eac6bcad632fb575ba1bcd69345920c29585e629eb9cc82c0e72c18b873d87af5e9cb9a898782a2cd9f6024b4e44f77ea102befbf691e9aded config 44d33cfe419cdb65cc14f2ac05aa9f8a1b9f2f432181e498071e41ef835662db1e4c5142adf4cfab2475e7b606696169936bd159d1d711f803322db93f242361 wpa_cli.sh" diff --git a/main/wpa_supplicant/config b/main/wpa_supplicant/config new file mode 100644 index 0000000..1d5c227 --- /dev/null +++ b/main/wpa_supplicant/config @@ -0,0 +1,497 @@ +# Example wpa_supplicant build time configuration +# +# This file lists the configuration options that are used when building the +# hostapd binary. All lines starting with # are ignored. Configuration option +# lines must be commented out complete, if they are not to be included, i.e., +# just setting VARIABLE=n is not disabling that variable. +# +# This file is included in Makefile, so variables like CFLAGS and LIBS can also +# be modified from here. In most cases, these lines should use += in order not +# to override previous values of the variables. + + +# Uncomment following two lines and fix the paths if you have installed OpenSSL +# or GnuTLS in non-default location +#CFLAGS += -I/usr/local/openssl/include +#LIBS += -L/usr/local/openssl/lib + +# Some Red Hat versions seem to include kerberos header files from OpenSSL, but +# the kerberos files are not in the default include path. Following line can be +# used to fix build issues on such systems (krb5.h not found). +#CFLAGS += -I/usr/include/kerberos + +# Driver interface for generic Linux wireless extensions +# Note: WEXT is deprecated in the current Linux kernel version and no new +# functionality is added to it. nl80211-based interface is the new +# replacement for WEXT and its use allows wpa_supplicant to properly control +# the driver to improve existing functionality like roaming and to support new +# functionality. +CONFIG_DRIVER_WEXT=y + +# Driver interface for Linux drivers using the nl80211 kernel interface +CONFIG_DRIVER_NL80211=y + +# driver_nl80211.c requires libnl. If you are compiling it yourself +# you may need to point hostapd to your version of libnl. +# +#CFLAGS += -I$ +#LIBS += -L$ + +# Use libnl v2.0 (or 3.0) libraries. +#CONFIG_LIBNL20=y + +# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored) +CONFIG_LIBNL32=y + + +# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) +#CONFIG_DRIVER_BSD=y +#CFLAGS += -I/usr/local/include +#LIBS += -L/usr/local/lib +#LIBS_p += -L/usr/local/lib +#LIBS_c += -L/usr/local/lib + +# Driver interface for Windows NDIS +#CONFIG_DRIVER_NDIS=y +#CFLAGS += -I/usr/include/w32api/ddk +#LIBS += -L/usr/local/lib +# For native build using mingw +#CONFIG_NATIVE_WINDOWS=y +# Additional directories for cross-compilation on Linux host for mingw target +#CFLAGS += -I/opt/mingw/mingw32/include/ddk +#LIBS += -L/opt/mingw/mingw32/lib +#CC=mingw32-gcc +# By default, driver_ndis uses WinPcap for low-level operations. This can be +# replaced with the following option which replaces WinPcap calls with NDISUIO. +# However, this requires that WZC is disabled (net stop wzcsvc) before starting +# wpa_supplicant. +# CONFIG_USE_NDISUIO=y + +# Driver interface for wired Ethernet drivers +CONFIG_DRIVER_WIRED=y + +# Driver interface for the Broadcom RoboSwitch family +#CONFIG_DRIVER_ROBOSWITCH=y + +# Driver interface for no driver (e.g., WPS ER only) +#CONFIG_DRIVER_NONE=y + +# Solaris libraries +#LIBS += -lsocket -ldlpi -lnsl +#LIBS_c += -lsocket + +# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is +# included) +CONFIG_IEEE8021X_EAPOL=y + +# EAP-MD5 +CONFIG_EAP_MD5=y + +# EAP-MSCHAPv2 +CONFIG_EAP_MSCHAPV2=y + +# EAP-TLS +CONFIG_EAP_TLS=y + +# EAL-PEAP +CONFIG_EAP_PEAP=y + +# EAP-TTLS +CONFIG_EAP_TTLS=y + +# EAP-FAST +# Note: If OpenSSL is used as the TLS library, OpenSSL 1.0 or newer is needed +# for EAP-FAST support. Older OpenSSL releases would need to be patched, e.g., +# with openssl-0.9.8x-tls-extensions.patch, to add the needed functions. +#CONFIG_EAP_FAST=y + +# EAP-GTC +CONFIG_EAP_GTC=y + +# EAP-OTP +CONFIG_EAP_OTP=y + +# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used) +CONFIG_EAP_SIM=y + +# EAP-PSK (experimental; this is _not_ needed for WPA-PSK) +CONFIG_EAP_PSK=y + +# EAP-pwd (secure authentication using only a password) +#CONFIG_EAP_PWD=y + +# EAP-PAX +CONFIG_EAP_PAX=y + +# LEAP +CONFIG_EAP_LEAP=y + +# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used) +CONFIG_EAP_AKA=y + +# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used). +# This requires CONFIG_EAP_AKA to be enabled, too. +CONFIG_EAP_AKA_PRIME=y + +# Enable USIM simulator (Milenage) for EAP-AKA +#CONFIG_USIM_SIMULATOR=y + +# EAP-SAKE +#CONFIG_EAP_SAKE=y + +# EAP-GPSK +#CONFIG_EAP_GPSK=y +# Include support for optional SHA256 cipher suite in EAP-GPSK +#CONFIG_EAP_GPSK_SHA256=y + +# EAP-TNC and related Trusted Network Connect support (experimental) +#CONFIG_EAP_TNC=y + +# Wi-Fi Protected Setup (WPS) +CONFIG_WPS=y +# Enable WPS external registrar functionality +#CONFIG_WPS_ER=y +# Disable credentials for an open network by default when acting as a WPS +# registrar. +#CONFIG_WPS_REG_DISABLE_OPEN=y +# Enable WPS support with NFC config method +#CONFIG_WPS_NFC=y + +# EAP-IKEv2 +#CONFIG_EAP_IKEV2=y + +# EAP-EKE +#CONFIG_EAP_EKE=y + +# PKCS#12 (PFX) support (used to read private key and certificate file from +# a file that usually has extension .p12 or .pfx) +CONFIG_PKCS12=y + +# Smartcard support (i.e., private key on a smartcard), e.g., with openssl +# engine. +CONFIG_SMARTCARD=y + +# PC/SC interface for smartcards (USIM, GSM SIM) +# Enable this if EAP-SIM or EAP-AKA is included +CONFIG_PCSC=y + +# Support HT overrides (disable HT/HT40, mask MCS rates, etc.) +#CONFIG_HT_OVERRIDES=y + +# Support VHT overrides (disable VHT, mask MCS rates, etc.) +#CONFIG_VHT_OVERRIDES=y + +# Development testing +#CONFIG_EAPOL_TEST=y + +# Select control interface backend for external programs, e.g, wpa_cli: +# unix = UNIX domain sockets (default for Linux/*BSD) +# udp = UDP sockets using localhost (127.0.0.1) +# udp6 = UDP IPv6 sockets using localhost (::1) +# named_pipe = Windows Named Pipe (default for Windows) +# udp-remote = UDP sockets with remote access (only for tests systems/purpose) +# udp6-remote = UDP IPv6 sockets with remote access (only for tests purpose) +# y = use default (backwards compatibility) +# If this option is commented out, control interface is not included in the +# build. +CONFIG_CTRL_IFACE=y + +# Include support for GNU Readline and History Libraries in wpa_cli. +# When building a wpa_cli binary for distribution, please note that these +# libraries are licensed under GPL and as such, BSD license may not apply for +# the resulting binary. +CONFIG_READLINE=y + +# Include internal line edit mode in wpa_cli. This can be used as a replacement +# for GNU Readline to provide limited command line editing and history support. +#CONFIG_WPA_CLI_EDIT=y + +# Remove debugging code that is printing out debug message to stdout. +# This can be used to reduce the size of the wpa_supplicant considerably +# if debugging code is not needed. The size reduction can be around 35% +# (e.g., 90 kB). +#CONFIG_NO_STDOUT_DEBUG=y + +# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save +# 35-50 kB in code size. +#CONFIG_NO_WPA=y + +# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support +# This option can be used to reduce code size by removing support for +# converting ASCII passphrases into PSK. If this functionality is removed, the +# PSK can only be configured as the 64-octet hexstring (e.g., from +# wpa_passphrase). This saves about 0.5 kB in code size. +#CONFIG_NO_WPA_PASSPHRASE=y + +# Disable scan result processing (ap_mode=1) to save code size by about 1 kB. +# This can be used if ap_scan=1 mode is never enabled. +#CONFIG_NO_SCAN_PROCESSING=y + +# Select configuration backend: +# file = text file (e.g., wpa_supplicant.conf; note: the configuration file +# path is given on command line, not here; this option is just used to +# select the backend that allows configuration files to be used) +# winreg = Windows registry (see win_example.reg for an example) +CONFIG_BACKEND=file + +# Remove configuration write functionality (i.e., to allow the configuration +# file to be updated based on runtime configuration changes). The runtime +# configuration can still be changed, the changes are just not going to be +# persistent over restarts. This option can be used to reduce code size by +# about 3.5 kB. +#CONFIG_NO_CONFIG_WRITE=y + +# Remove support for configuration blobs to reduce code size by about 1.5 kB. +#CONFIG_NO_CONFIG_BLOBS=y + +# Select program entry point implementation: +# main = UNIX/POSIX like main() function (default) +# main_winsvc = Windows service (read parameters from registry) +# main_none = Very basic example (development use only) +#CONFIG_MAIN=main + +# Select wrapper for operating system and C library specific functions +# unix = UNIX/POSIX like systems (default) +# win32 = Windows systems +# none = Empty template +#CONFIG_OS=unix + +# Select event loop implementation +# eloop = select() loop (default) +# eloop_win = Windows events and WaitForMultipleObject() loop +#CONFIG_ELOOP=eloop + +# Should we use poll instead of select? Select is used by default. +#CONFIG_ELOOP_POLL=y + +# Should we use epoll instead of select? Select is used by default. +#CONFIG_ELOOP_EPOLL=y + +# Select layer 2 packet implementation +# linux = Linux packet socket (default) +# pcap = libpcap/libdnet/WinPcap +# freebsd = FreeBSD libpcap +# winpcap = WinPcap with receive thread +# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y) +# none = Empty template +#CONFIG_L2_PACKET=linux + +# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS) +CONFIG_PEERKEY=y + +# IEEE 802.11w (management frame protection), also known as PMF +# Driver support is also needed for IEEE 802.11w. +#CONFIG_IEEE80211W=y + +# Select TLS implementation +# openssl = OpenSSL (default) +# gnutls = GnuTLS +# internal = Internal TLSv1 implementation (experimental) +# none = Empty template +CONFIG_TLS=openssl + +# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1) +# can be enabled to get a stronger construction of messages when block ciphers +# are used. It should be noted that some existing TLS v1.0 -based +# implementation may not be compatible with TLS v1.1 message (ClientHello is +# sent prior to negotiating which version will be used) +#CONFIG_TLSV11=y + +# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2) +# can be enabled to enable use of stronger crypto algorithms. It should be +# noted that some existing TLS v1.0 -based implementation may not be compatible +# with TLS v1.2 message (ClientHello is sent prior to negotiating which version +# will be used) +#CONFIG_TLSV12=y + +# If CONFIG_TLS=internal is used, additional library and include paths are +# needed for LibTomMath. Alternatively, an integrated, minimal version of +# LibTomMath can be used. See beginning of libtommath.c for details on benefits +# and drawbacks of this option. +#CONFIG_INTERNAL_LIBTOMMATH=y +#ifndef CONFIG_INTERNAL_LIBTOMMATH +#LTM_PATH=/usr/src/libtommath-0.39 +#CFLAGS += -I$(LTM_PATH) +#LIBS += -L$(LTM_PATH) +#LIBS_p += -L$(LTM_PATH) +#endif +# At the cost of about 4 kB of additional binary size, the internal LibTomMath +# can be configured to include faster routines for exptmod, sqr, and div to +# speed up DH and RSA calculation considerably +#CONFIG_INTERNAL_LIBTOMMATH_FAST=y + +# Include NDIS event processing through WMI into wpa_supplicant/wpasvc. +# This is only for Windows builds and requires WMI-related header files and +# WbemUuid.Lib from Platform SDK even when building with MinGW. +#CONFIG_NDIS_EVENTS_INTEGRATED=y +#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib" + +# Add support for old DBus control interface +# (fi.epitest.hostap.WPASupplicant) +#CONFIG_CTRL_IFACE_DBUS=y + +# Add support for new DBus control interface +# (fi.w1.hostap.wpa_supplicant1) +#CONFIG_CTRL_IFACE_DBUS_NEW=y + +# Add introspection support for new DBus control interface +#CONFIG_CTRL_IFACE_DBUS_INTRO=y + +# Add support for loading EAP methods dynamically as shared libraries. +# When this option is enabled, each EAP method can be either included +# statically (CONFIG_EAP_=y) or dynamically (CONFIG_EAP_=dyn). +# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to +# be loaded in the beginning of the wpa_supplicant configuration file +# (see load_dynamic_eap parameter in the example file) before being used in +# the network blocks. +# +# Note that some shared parts of EAP methods are included in the main program +# and in order to be able to use dynamic EAP methods using these parts, the +# main program must have been build with the EAP method enabled (=y or =dyn). +# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries +# unless at least one of them was included in the main build to force inclusion +# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included +# in the main build to be able to load these methods dynamically. +# +# Please also note that using dynamic libraries will increase the total binary +# size. Thus, it may not be the best option for targets that have limited +# amount of memory/flash. +#CONFIG_DYNAMIC_EAP_METHODS=y + +# IEEE Std 802.11r-2008 (Fast BSS Transition) +#CONFIG_IEEE80211R=y + +# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt) +#CONFIG_DEBUG_FILE=y + +# Send debug messages to syslog instead of stdout +#CONFIG_DEBUG_SYSLOG=y +# Set syslog facility for debug messages +#CONFIG_DEBUG_SYSLOG_FACILITY=LOG_DAEMON + +# Add support for sending all debug messages (regardless of debug verbosity) +# to the Linux kernel tracing facility. This helps debug the entire stack by +# making it easy to record everything happening from the driver up into the +# same file, e.g., using trace-cmd. +#CONFIG_DEBUG_LINUX_TRACING=y + +# Add support for writing debug log to Android logcat instead of standard +# output +#CONFIG_ANDROID_LOG=y + +# Enable privilege separation (see README 'Privilege separation' for details) +#CONFIG_PRIVSEP=y + +# Enable mitigation against certain attacks against TKIP by delaying Michael +# MIC error reports by a random amount of time between 0 and 60 seconds +CONFIG_DELAYED_MIC_ERROR_REPORT=y + +# Enable tracing code for developer debugging +# This tracks use of memory allocations and other registrations and reports +# incorrect use with a backtrace of call (or allocation) location. +#CONFIG_WPA_TRACE=y +# For BSD, uncomment these. +#LIBS += -lexecinfo +#LIBS_p += -lexecinfo +#LIBS_c += -lexecinfo + +# Use libbfd to get more details for developer debugging +# This enables use of libbfd to get more detailed symbols for the backtraces +# generated by CONFIG_WPA_TRACE=y. +#CONFIG_WPA_TRACE_BFD=y +# For BSD, uncomment these. +#LIBS += -lbfd -liberty -lz +#LIBS_p += -lbfd -liberty -lz +#LIBS_c += -lbfd -liberty -lz + +# wpa_supplicant depends on strong random number generation being available +# from the operating system. os_get_random() function is used to fetch random +# data when needed, e.g., for key generation. On Linux and BSD systems, this +# works by reading /dev/urandom. It should be noted that the OS entropy pool +# needs to be properly initialized before wpa_supplicant is started. This is +# important especially on embedded devices that do not have a hardware random +# number generator and may by default start up with minimal entropy available +# for random number generation. +# +# As a safety net, wpa_supplicant is by default trying to internally collect +# additional entropy for generating random data to mix in with the data fetched +# from the OS. This by itself is not considered to be very strong, but it may +# help in cases where the system pool is not initialized properly. However, it +# is very strongly recommended that the system pool is initialized with enough +# entropy either by using hardware assisted random number generator or by +# storing state over device reboots. +# +# wpa_supplicant can be configured to maintain its own entropy store over +# restarts to enhance random number generation. This is not perfect, but it is +# much more secure than using the same sequence of random numbers after every +# reboot. This can be enabled with -e command line option. The +# specified file needs to be readable and writable by wpa_supplicant. +# +# If the os_get_random() is known to provide strong random data (e.g., on +# Linux/BSD, the board in question is known to have reliable source of random +# data from /dev/urandom), the internal wpa_supplicant random pool can be +# disabled. This will save some in binary size and CPU use. However, this +# should only be considered for builds that are known to be used on devices +# that meet the requirements described above. +#CONFIG_NO_RANDOM_POOL=y + +# IEEE 802.11n (High Throughput) support (mainly for AP mode) +#CONFIG_IEEE80211N=y + +# IEEE 802.11ac (Very High Throughput) support (mainly for AP mode) +# (depends on CONFIG_IEEE80211N) +#CONFIG_IEEE80211AC=y + +# Wireless Network Management (IEEE Std 802.11v-2011) +# Note: This is experimental and not complete implementation. +#CONFIG_WNM=y + +# Interworking (IEEE 802.11u) +# This can be used to enable functionality to improve interworking with +# external networks (GAS/ANQP to learn more about the networks and network +# selection based on available credentials). +#CONFIG_INTERWORKING=y + +# Hotspot 2.0 +#CONFIG_HS20=y + +# Disable roaming in wpa_supplicant +#CONFIG_NO_ROAMING=y + +# AP mode operations with wpa_supplicant +# This can be used for controlling AP mode operations with wpa_supplicant. It +# should be noted that this is mainly aimed at simple cases like +# WPA2-Personal while more complex configurations like WPA2-Enterprise with an +# external RADIUS server can be supported with hostapd. +CONFIG_AP=y + +# P2P (Wi-Fi Direct) +# This can be used to enable P2P support in wpa_supplicant. See README-P2P for +# more information on P2P operations. +CONFIG_P2P=y + +# Enable TDLS support +#CONFIG_TDLS=y + +# Wi-Fi Direct +# This can be used to enable Wi-Fi Direct extensions for P2P using an external +# program to control the additional information exchanges in the messages. +#CONFIG_WIFI_DISPLAY=y + +# Autoscan +# This can be used to enable automatic scan support in wpa_supplicant. +# See wpa_supplicant.conf for more information on autoscan usage. +# +# Enabling directly a module will enable autoscan support. +# For exponential module: +#CONFIG_AUTOSCAN_EXPONENTIAL=y +# For periodic module: +#CONFIG_AUTOSCAN_PERIODIC=y + +# Password (and passphrase, etc.) backend for external storage +# These optional mechanisms can be used to add support for storing passwords +# and other secrets in external (to wpa_supplicant) location. This allows, for +# example, operating system specific key storage to be used +# +# External password backend for testing purposes (developer use) +#CONFIG_EXT_PASSWORD_TEST=y -- 2.6.1 --- Unsubscribe: alpine-aports+unsubscribe@lists.alpinelinux.org Help: alpine-aports+help@lists.alpinelinux.org ---