Valery Kartel: 4 testing/exim: upgrade to 4.84, add SPF support, made some tidying to work out of box None None None 12 files changed, 145 insertions(+), 1302 deletions(-)
Copy & paste the following snippet into your terminal to import this patchset into git:
curl -s https://lists.alpinelinux.org/~alpine/devel/patches/613/mbox | git am -3Learn more about email & git
--- testing/exim/APKBUILD | 40 +++++++++++++++++++++++----------------- testing/exim/exim.Makefile | 8 ++++---- testing/exim/exim.initd | 2 +- testing/exim/exim.logrotate | 2 +- 4 files changed, 29 insertions(+), 23 deletions(-)
Natanael Copa <ncopa@alpinelinux.org>applied. thanks! -nc --- Unsubscribe: alpine-devel+unsubscribe@lists.alpinelinux.org Help: alpine-devel+help@lists.alpinelinux.org ---
diff --git a/testing/exim/APKBUILD b/testing/exim/APKBUILD index 7aad8b7..fa46dce 100644 --- a/testing/exim/APKBUILD +++ b/testing/exim/APKBUILD @@ -1,14 +1,14 @@ # Contributor: Jesse Young <jlyo@jlyo.org> # Maintainer: Jesse Young <jlyo@jlyo.org> pkgname=exim -pkgver=4.82 +pkgver=4.84 pkgrel=0 pkgdesc="A Message Transfer Agent" url="http://www.exim.org/" arch="all" license="GPL2" -depends="openssl" -depends_dev="db-dev pcre-dev openssl-dev" +depends="openssl libspf2"
Natanael Copa <ncopa@alpinelinux.org>I think I was too quick to push it. > >> exim*: Tracing dependencies... openssl libspf2 so:libc.musl-x86_64.so.1 so:libcrypto.so.1.0.0 so:libdb-5.3.so so:libpcre.so.1 so:libspf2.so.2 so:libssl.so.1.0.0 > >> exim*: Package size: 1.4 MB so:libspf2.so.2 is there so libspf2 it should not be added to depends. or am i missing something? -nc --- Unsubscribe: alpine-devel+unsubscribe@lists.alpinelinux.org Help: alpine-devel+help@lists.alpinelinux.org ---
+depends_dev="db-dev pcre-dev openssl-dev libspf2-dev" makedepends="$depends_dev" install= subpackages="$pkgname-doc" @@ -48,8 +48,14 @@ package() { install -D -m644 doc/exim.8 ${pkgdir}/usr/share/man/man8/exim.8 mkdir -p ${pkgdir}/var/spool/exim/db ${pkgdir}/etc/mail \ ${pkgdir}/var/log/exim ${pkgdir}/usr/lib \ - ${pkgdir}/var/log/exim ${pkgdir}/usr/sbin - chmod 770 ${pkgdir}/var/spool/exim ${pkgdir}/var/spool/exim/db ${pkgdir}/var/log/exim + ${pkgdir}/var/log/exim ${pkgdir}/usr/sbin \ + ${pkgdir}/var/spool/mail + chmod 770 ${pkgdir}/var/spool/exim ${pkgdir}/var/spool/exim/db + chmod 750 ${pkgdir}/var/log/exim ${pkgdir}/etc/mail + chmod 03775 ${pkgdir}/var/spool/mail + chown root:mail ${pkgdir}/var/spool/mail ${pkgdir}/etc/mail + chown mail:mail ${pkgdir}/var/log/exim + install -D -m644 src/configure.default ${pkgdir}/etc/mail/exim.conf cd build-Linux-* for i in exicyclog exim_checkaccess exim_dumpdb exim_lock\ exim_tidydb exipick exiqsumm exigrep exim_dbmbuild exim\ @@ -75,21 +81,21 @@ package() { install -m644 -D "$srcdir"/$pkgname.confd "$pkgdir"/etc/conf.d/$pkgname } -md5sums="feb933baa4db773c2ef76b794c60b647 exim-4.82.tar.bz2 -7dfc9ed9307db655c8aec33b9618608d exim.Makefile +md5sums="3d14522e604b687b9e515f5aa739b2c0 exim-4.84.tar.bz2 +90e01a407bfb32c406f5265d06c26ad7 exim.Makefile f442b68d435598831bab8536ade071b8 exim.confd -55923aa95e8445eb9390485435c63084 exim.initd -281ad020d1df8c6ed0f4ecb53c0fce63 exim.logrotate +6ba3c29545484c152df7ac8656943891 exim.initd +8e8003542b9b8cd6300e46c24c302802 exim.logrotate eaec7a2a5f49b768fa168415ef0105fb aliases" -sha256sums="46dedfb6ced2aa4a1eddc5d8ce46a790a961508bd389faa2e215302ae80d91cf exim-4.82.tar.bz2 -3a57b01e89cf0d00b6fff92edfcd31402bd07b569a3a642b323417e0db025727 exim.Makefile +sha256sums="78ea22be87fb6df880e7fd482f3bec9ef6ceca0c9dedd50f8a26cae0b38b9e9c exim-4.84.tar.bz2 +0b6f24deea28bd236139dadef9632deb5255ac082bb9988dfac705d67034c92d exim.Makefile 668f912565a59926957090c6143f669f0e9de2cf441507d3c05fcd046865b401 exim.confd -e9123cd5f4d062931006b2b485479b7f30e07a85f23c19476df243943f296f7b exim.initd -8c8e074b3ba2e99b83e89e8f20105846a19263ad63997def70f41ffb3835bc8e exim.logrotate +46869c47ff928c5628113e4a76ea469e8202339305b781ada0e37dcf6cd5bf76 exim.initd +49b4d81d6823057c89f7734b2d76de389d427af56164faad32ec883f8ca9e804 exim.logrotate f2943990feb2ddfb93e8b0816ef914e7057cb5d48a093901881e970b1002ab8a aliases" -sha512sums="3f65d99e737a524c5ca84bd912193774418134d77f38868258890945c559f3890af470723da7e88a601af3bd4e8055302db59c455381dc26d573d38b64e2f2ca exim-4.82.tar.bz2 -f2fea5d347b1570c664df0a4b298d2eef8efbb23dce91e24fe4ac5929d052f645fe0fdd4032820fdb44f713ef0ef39f96b915179d690b1209801c41f0040f721 exim.Makefile +sha512sums="3cd41af6d57e5f0377fc93367753eae6cb6bf835803e8608c44e1da5acefce1ed8886f4fe7536950de072bfed6e927afe1536c1e6466cf3121dd352b69a68039 exim-4.84.tar.bz2 +e6936db8316fbbd32ea9828137eaeeb2e84053252ce1c180015b99d70a9f8ad5a4dcbad565595e19c06a48498ee2df8e86b22efb6ca2bca64af13a4395a89f23 exim.Makefile 24bae5bba1b41e59247cd7089c3f9ffcc5f4b26c3da1b21f755724a7ee5c99a05e324437c965ae86170056cc63b9bcdc41f624a747ab31b887d69cff620f2155 exim.confd -e6659a9b81d34a80ad2c44594ba9a491f7be5bbdb6968736fb22f314e04e4ac9be9fd3e6541ebdf6a31a287b524f5484124fa19c1a1ddc52d8455d80a6f0f8d8 exim.initd -079986bc315cfcf58de0d321de4b036c8322212ef2e3cc9601d086040ec5c6a29e0073627f5d0ea7673c9efbcc8144457617ec97c47cb64f5ad6157f67eab67d exim.logrotate +aeec8762d1dce4b09049e08d0c275ae475e639c4a3ad667c4208df36eba71c544311f5c175d7f481ea84213cf130da0a77a0e32d3ff7e933a7356deab8c4e850 exim.initd +665bfa5ced8829f8f199bbcd040c1c667193643c6d902e5412679cf138e4c8cda7ffd0eefc8ff3b76d95202ee52d0c372b7c319746ff590dd6b61b93c1a2fedf exim.logrotate 9cc0fe81b2110aecdd3d494650d051f773c2c83611692c4e5d365b89dcddd08b16af5b8f5f4ac3e3f553c36198846a05793d8fd01113f62d2ab761f555409201 aliases" diff --git a/testing/exim/exim.Makefile b/testing/exim/exim.Makefile index a7ec877..533b214 100644 --- a/testing/exim/exim.Makefile +++ b/testing/exim/exim.Makefile @@ -133,7 +133,7 @@ CONFIGURE_FILE=/etc/mail/exim.conf # deliveries. (Local deliveries run as various non-root users, typically as the # owner of a local mailbox.) Specifying these values as root is not supported. -EXIM_USER=ref:exim +EXIM_USER=ref:mail # If you specify EXIM_USER as a name, this is looked up at build time, and the # uid number is built into the binary. However, you can specify that this @@ -404,9 +404,9 @@ WITH_OLD_DEMIME=yes # installed on your system (www.libspf2.org). Depending on where it is installed # you may have to edit the CFLAGS and LDFLAGS lines. -# EXPERIMENTAL_SPF=yes -# CFLAGS += -I/usr/local/include -# LDFLAGS += -lspf2 +EXPERIMENTAL_SPF=yes +CFLAGS += -I/usr/local/include +LDFLAGS += -lspf2 # Uncomment the following lines to add SRS (Sender rewriting scheme) support. # You need to have libsrs_alt installed on your system (srs.mirtol.com). diff --git a/testing/exim/exim.initd b/testing/exim/exim.initd index 745d1ab..3662ebe 100644 --- a/testing/exim/exim.initd +++ b/testing/exim/exim.initd @@ -13,7 +13,7 @@ depend() { start() { ebegin "Starting ${SVCNAME}" - start-stop-daemon --start --quiet --exec /usr/sbin/exim --pidfile /var/run/${SVCNAME}.pid -- -C /etc/exim/${SVCNAME}.conf ${EXIM_OPTS:--bd -q15m} + start-stop-daemon --start --quiet --exec /usr/sbin/exim --pidfile /var/run/${SVCNAME}.pid -- ${EXIM_OPTS:--bd -q15m} eend $? } diff --git a/testing/exim/exim.logrotate b/testing/exim/exim.logrotate index 7d99b55..c923ed1 100644 --- a/testing/exim/exim.logrotate +++ b/testing/exim/exim.logrotate @@ -1,4 +1,4 @@ -/var/log/exim/exim*.log { +/var/log/exim/*log { daily missingok rotate 28 -- 2.2.0 --- Unsubscribe: alpine-devel+unsubscribe@lists.alpinelinux.org Help: alpine-devel+help@lists.alpinelinux.org ---
--- testing/exim/APKBUILD | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/testing/exim/APKBUILD b/testing/exim/APKBUILD index fa46dce..2ef8f64 100644 --- a/testing/exim/APKBUILD +++ b/testing/exim/APKBUILD @@ -7,9 +7,9 @@ pkgdesc="A Message Transfer Agent" url="http://www.exim.org/" arch="all" license="GPL2" -depends="openssl libspf2" +depends="" depends_dev="db-dev pcre-dev openssl-dev libspf2-dev" -makedepends="$depends_dev" +makedepends="gawk $depends_dev" install= subpackages="$pkgname-doc" source="ftp://exim.inode.at/exim/exim4/$pkgname-$pkgver.tar.bz2
Natanael Copa <ncopa@alpinelinux.org>applied and bumped pkgrel (otherwise till the package on the repositories depend on both so:libspf2.so.2 while the APKBUILD in aports *with exact same version* would produce package with the correct depends. btw, i noticed this: /bin/sh scripts/source_checks scripts/source_checks: line 16: perl: not found scripts/source_checks: line 16: perl: not found I don't know if it matters. -nc --- Unsubscribe: alpine-devel+unsubscribe@lists.alpinelinux.org Help: alpine-devel+help@lists.alpinelinux.org ---
-- 2.2.0 --- Unsubscribe: alpine-devel+unsubscribe@lists.alpinelinux.org Help: alpine-devel+help@lists.alpinelinux.org ---
--- testing/exim/APKBUILD | 138 +++-- testing/exim/aliases | 35 -- testing/exim/exim.Makefile | 1207 +---------------------------------------- testing/exim/exim.logrotate | 2 +- testing/exim/exim.pre-install | 6 + 5 files changed, 113 insertions(+), 1275 deletions(-) delete mode 100644 testing/exim/aliases create mode 100644 testing/exim/exim.pre-install diff --git a/testing/exim/APKBUILD b/testing/exim/APKBUILD index 2ef8f64..609e115 100644 --- a/testing/exim/APKBUILD +++ b/testing/exim/APKBUILD @@ -2,22 +2,22 @@ # Maintainer: Jesse Young <jlyo@jlyo.org> pkgname=exim pkgver=4.84 -pkgrel=0 +pkgrel=1
Natanael Copa <ncopa@alpinelinux.org>as said in previous email, i bumped it for you so: error: testing/exim/APKBUILD: patch does not apply Patch failed at 0001 testing/exim: new APKBUILD from scratch, modular package care to rebase it? -nc --- Unsubscribe: alpine-devel+unsubscribe@lists.alpinelinux.org Help: alpine-devel+help@lists.alpinelinux.org ---
pkgdesc="A Message Transfer Agent" url="http://www.exim.org/" arch="all" license="GPL2" -depends="" -depends_dev="db-dev pcre-dev openssl-dev libspf2-dev" -makedepends="gawk $depends_dev" +depends= +depends_dev="db-dev pcre-dev openssl-dev libspf2-dev mysql-dev postgresql-dev sqlite-dev" +makedepends="bash gawk perl $depends_dev" install= -subpackages="$pkgname-doc" +subpackages="$pkgname-cdb $pkgname-doc $pkgname-dnsdb $pkgname-passwd $pkgname-sqlite $pkgname-mysql $pkgname-postgresql $pkgname-utils $pkgname-scripts" source="ftp://exim.inode.at/exim/exim4/$pkgname-$pkgver.tar.bz2 exim.Makefile exim.confd exim.initd exim.logrotate - aliases" + exim.pre-install" _builddir="$srcdir"/$pkgname-$pkgver @@ -32,70 +32,104 @@ prepare() { build() { cd "$_builddir" - # do not build parallel - export MAKEFLAGS=-j1 make makefile - make || { - cd build-Linux-* - sh ../scripts/Configure-config.h "make" - } && make || return 1 + make -j1 } package() { - cd "$_builddir" - - install -D -m644 ../${pkgname}.logrotate ${pkgdir}/etc/logrotate.d/${pkgname} + cd $_builddir + make DESTDIR=$pkgdir INSTALL_ARG="-no_symlink -no_chown exim" install install -D -m644 doc/exim.8 ${pkgdir}/usr/share/man/man8/exim.8 - mkdir -p ${pkgdir}/var/spool/exim/db ${pkgdir}/etc/mail \ - ${pkgdir}/var/log/exim ${pkgdir}/usr/lib \ - ${pkgdir}/var/log/exim ${pkgdir}/usr/sbin \ - ${pkgdir}/var/spool/mail - chmod 770 ${pkgdir}/var/spool/exim ${pkgdir}/var/spool/exim/db - chmod 750 ${pkgdir}/var/log/exim ${pkgdir}/etc/mail - chmod 03775 ${pkgdir}/var/spool/mail - chown root:mail ${pkgdir}/var/spool/mail ${pkgdir}/etc/mail - chown mail:mail ${pkgdir}/var/log/exim - install -D -m644 src/configure.default ${pkgdir}/etc/mail/exim.conf cd build-Linux-* - for i in exicyclog exim_checkaccess exim_dumpdb exim_lock\ - exim_tidydb exipick exiqsumm exigrep exim_dbmbuild exim\ - exim_fixdb eximstats exinext exiqgrep exiwhat; do - install -m 0755 "$i" "$pkgdir/usr/sbin" - done - - cd "$srcdir/exim-$pkgver/src" - sed -e "s|/etc/aliases|/etc/mail/aliases|g" \ - -e "s|SYSTEM_ALIASES_FILE|/etc/mail/aliases|g" configure.default \ - >"$pkgdir/etc/mail/exim.conf" - - cp "$srcdir/aliases" "$pkgdir/etc/mail" - cd "$pkgdir/usr/sbin" + cd $pkgdir/usr/sbin + mv exim-${pkgver}-* exim for i in mailq rmail rsmtp runq sendmail; do ln -s exim "$i" done - # fhs compliancy - ln -s ../sbin/exim ../lib/sendmail + install -m644 -D $srcdir/${pkgname}.logrotate $pkgdir/etc/logrotate.d/$pkgname + install -m644 -D $srcdir/$pkgname.confd $pkgdir/etc/conf.d/$pkgname + install -m755 -D $srcdir/$pkgname.initd $pkgdir/etc/init.d/$pkgname + install -m750 -D -g mail -d $pkgdir/usr/lib/exim + install -m750 -D -o mail -d $pkgdir/var/log/exim +} + +scripts() { + pkgdesc="exim scripts" + depends="exim perl" + arch="noarch" + cd $_builddir + make DESTDIR=$subpkgdir \ + INSTALL_ARG="exicyclog exim_checkaccess eximstats + exiqgrep exigrep exinext exiqsumm exipick exiwhat" \ + install + rm -fr $subpkgdir/etc +} + +utils() { + pkgdesc="exim utils" + depends="exim" + cd $_builddir + make DESTDIR=$subpkgdir \ + INSTALL_ARG="exim_dbmbuild exim_dumpdb exim_tidydb exim_fixdb exim_lock" \ + install + rm -fr $subpkgdir/etc +} + +sqlite() { + pkgdesc="sqlite support for exim" + depends="exim" + _inst_lookup sqlite +} + +mysql() { + pkgdesc="mysql support for exim" + depends="exim" + _inst_lookup mysql +} + +postgresql() { + pkgdesc="postgresql support for exim" + depends="exim" + _inst_lookup pgsql +} + +cdb() { + pkgdesc="cdb support for exim" + depends="exim" + _inst_lookup cdb +} + +dnsdb() { + pkgdesc="dnsdb support for exim" + depends="exim" + _inst_lookup dnsdb +} + +passwd() { + pkgdesc="passwd support for exim" + depends="exim" + _inst_lookup passwd +} - # remove the 2 lines below (and this) if there is no init.d script - install -m755 -D "$srcdir"/$pkgname.initd "$pkgdir"/etc/init.d/$pkgname - install -m644 -D "$srcdir"/$pkgname.confd "$pkgdir"/etc/conf.d/$pkgname +_inst_lookup() { + install -D -m755 $_builddir/build-Linux-*/lookups/$1.so $subpkgdir/usr/lib/exim/$1.so } md5sums="3d14522e604b687b9e515f5aa739b2c0 exim-4.84.tar.bz2 -90e01a407bfb32c406f5265d06c26ad7 exim.Makefile +4fe6af8314516d34e1979f207ab1e5b5 exim.Makefile f442b68d435598831bab8536ade071b8 exim.confd 6ba3c29545484c152df7ac8656943891 exim.initd -8e8003542b9b8cd6300e46c24c302802 exim.logrotate -eaec7a2a5f49b768fa168415ef0105fb aliases" +67ab2cc18a14146de7867abe08b2fa12 exim.logrotate +a58ceadf9f3fa8b06bbadb01bc731dc8 exim.pre-install" sha256sums="78ea22be87fb6df880e7fd482f3bec9ef6ceca0c9dedd50f8a26cae0b38b9e9c exim-4.84.tar.bz2 -0b6f24deea28bd236139dadef9632deb5255ac082bb9988dfac705d67034c92d exim.Makefile +1509d188e9734b607080a4e3584a9667a4d0bf46cdbba1bc6998b75a13a19a0c exim.Makefile 668f912565a59926957090c6143f669f0e9de2cf441507d3c05fcd046865b401 exim.confd 46869c47ff928c5628113e4a76ea469e8202339305b781ada0e37dcf6cd5bf76 exim.initd -49b4d81d6823057c89f7734b2d76de389d427af56164faad32ec883f8ca9e804 exim.logrotate -f2943990feb2ddfb93e8b0816ef914e7057cb5d48a093901881e970b1002ab8a aliases" +3943ceb711fe119a6622d5b4ca092e3ee1c4026bd93a7a2eeef93287c0196760 exim.logrotate +3470a7f2860b0c01549577edf446fc13cdcf3e10e1b52875eee666017227db03 exim.pre-install" sha512sums="3cd41af6d57e5f0377fc93367753eae6cb6bf835803e8608c44e1da5acefce1ed8886f4fe7536950de072bfed6e927afe1536c1e6466cf3121dd352b69a68039 exim-4.84.tar.bz2 -e6936db8316fbbd32ea9828137eaeeb2e84053252ce1c180015b99d70a9f8ad5a4dcbad565595e19c06a48498ee2df8e86b22efb6ca2bca64af13a4395a89f23 exim.Makefile +4be1f885b8bff22ba5f3bf59a309b8311f04dd715e50953eb09104883b805b7fe55f5a9f79e4bb1ae6a13554d7516df92315dbf68cd35caabcc71ba6a4292630 exim.Makefile 24bae5bba1b41e59247cd7089c3f9ffcc5f4b26c3da1b21f755724a7ee5c99a05e324437c965ae86170056cc63b9bcdc41f624a747ab31b887d69cff620f2155 exim.confd aeec8762d1dce4b09049e08d0c275ae475e639c4a3ad667c4208df36eba71c544311f5c175d7f481ea84213cf130da0a77a0e32d3ff7e933a7356deab8c4e850 exim.initd -665bfa5ced8829f8f199bbcd040c1c667193643c6d902e5412679cf138e4c8cda7ffd0eefc8ff3b76d95202ee52d0c372b7c319746ff590dd6b61b93c1a2fedf exim.logrotate -9cc0fe81b2110aecdd3d494650d051f773c2c83611692c4e5d365b89dcddd08b16af5b8f5f4ac3e3f553c36198846a05793d8fd01113f62d2ab761f555409201 aliases" +6d45a388b3e371beac70b64ebdc18ea8edf8c57dc4855617e181922ed2c4793f94b142d935a7318755f6832aa0292ac64936bf6c9a174629303d7a880f2b5850 exim.logrotate +6b6e85f392cd338602653b86f88daedf90a735e04f9bbcbac83df357ec881f436a74aedd91db21bd1e2e510eedea39587ae473efa7be9b75c6e2efe0472cf28d exim.pre-install" diff --git a/testing/exim/aliases b/testing/exim/aliases deleted file mode 100644 index 3f76693..0000000 --- a/testing/exim/aliases @@ -1,35 +0,0 @@ -# -# /etc/mail/aliases -# -# NOTE: Make sure you run 'newaliases' after modifying this file -# - -# Basic system aliases -- these MUST be present. -MAILER-DAEMON: postmaster -postmaster: root -hostmaster: root -webmaster: hostmaster -ftpmaster: hostmaster -admin: hostmaster -administrator: hostmaster - -# General redirections for pseudo accounts. -bin: root -daemon: root -games: root -ingres: root -nobody: root -system: root -toor: root -uucp: root - -# Well-known aliases. -manager: root -dumper: root -operator: root - -# trap decode to catch security attacks -decode: root - -# Person who should get root's mail -#root: diff --git a/testing/exim/exim.Makefile b/testing/exim/exim.Makefile index 533b214..4bcb512 100644 --- a/testing/exim/exim.Makefile +++ b/testing/exim/exim.Makefile @@ -1,1227 +1,60 @@ -# $Cambridge: exim/src/src/EDITME,v 1.27 2010/06/12 15:21:25 jetmore Exp $ - -################################################## -# The Exim mail transport agent # -################################################## - -# This is the template for Exim's main build-time configuration file. It -# contains settings that are independent of any operating system. These are -# things that are mostly sysadmin choices. The items below are divided into -# those you must specify, those you probably want to specify, those you might -# often want to specify, and those that you almost never need to mention. - -# Edit this file and save the result to a file called Local/Makefile within the -# Exim distribution directory before running the "make" command. - -# Things that depend on the operating system have default settings in -# OS/Makefile-Default, but these are overridden for some OS by files called -# called OS/Makefile-<osname>. You can further override these by creating files -# called Local/Makefile-<osname>, where "<osname>" stands for the name of your -# operating system - look at the names in the OS directory to see which names -# are recognized. - -# However, if you are building Exim for a single OS only, you don't need to -# worry about setting up Local/Makefile-<osname>. Any build-time configuration -# settings you require can in fact be placed in the one file called -# Local/Makefile. It is only if you are building for several OS from the same -# source files that you need to worry about splitting off your own OS-dependent -# settings into separate files. (There's more explanation about how this all -# works in the toplevel README file, under "Modifying the building process", as -# well as in the Exim specification.) - -# One OS-specific thing that may need to be changed is the command for running -# the C compiler; the overall default is gcc, but some OS Makefiles specify cc. -# You can override anything that is set by putting CC=whatever in your -# Local/Makefile. - -# NOTE: You should never need to edit any of the distributed Makefiles; all -# overriding can be done in your Local/Makefile(s). This will make it easier -# for you when the next release comes along. - -# The location of the X11 libraries is something else that is quite variable -# even between different versions of the same operating system (and indeed -# there are different versions of X11 as well, of course). The four settings -# concerned here are X11, XINCLUDE, XLFLAGS (linking flags) and X11_LD_LIB -# (dynamic run-time library). You need not worry about X11 unless you want to -# compile the Exim monitor utility. Exim itself does not use X11. - -# Another area of variability between systems is the type and location of the -# DBM library package. Exim has support for ndbm, gdbm, tdb, and Berkeley DB. -# By default the code assumes ndbm; this often works with gdbm or DB, provided -# they are correctly installed, via their compatibility interfaces. However, -# Exim can also be configured to use the native calls for Berkeley DB (obsolete -# versions 1.85, 2.x, 3.x, or the current 4.x version) and also for gdbm. - -# For some operating systems, a default DBM library (other than ndbm) is -# selected by a setting in the OS-specific Makefile. Most modern OS now have -# a DBM library installed as standard, and in many cases this will be selected -# for you by the OS-specific configuration. If Exim compiles without any -# problems, you probably do not have to worry about the DBM library. If you -# do want or need to change it, you should first read the discussion in the -# file doc/dbm.discuss.txt, which also contains instructions for testing Exim's -# interface to the DBM library. - -# In Local/Makefiles blank lines and lines starting with # are ignored. It is -# also permitted to use the # character to add a comment to a setting, for -# example -# -# EXIM_GID=42 # the "mail" group -# -# However, with some versions of "make" this works only if there is no white -# space between the end of the setting and the #, so perhaps it is best -# avoided. A consequence of this facility is that it is not possible to have -# the # character present in any setting, but I can't think of any cases where -# this would be wanted. -############################################################################### - - - -############################################################################### -# THESE ARE THINGS YOU MUST SPECIFY # -############################################################################### - -# Exim will not build unless you specify BIN_DIRECTORY, CONFIGURE_FILE, and -# EXIM_USER. You also need EXIM_GROUP if EXIM_USER specifies a uid by number. - -# If you don't specify SPOOL_DIRECTORY, Exim won't fail to build. However, it -# really is a very good idea to specify it here rather than at run time. This -# is particularly true if you let the logs go to their default location in the -# spool directory, because it means that the location of the logs is known -# before Exim has read the run time configuration file. - -#------------------------------------------------------------------------------ -# BIN_DIRECTORY defines where the exim binary will be installed by "make -# install". The path is also used internally by Exim when it needs to re-invoke -# itself, either to send an error message, or to recover root privilege. Exim's -# utility binaries and scripts are also installed in this directory. There is -# no "standard" place for the binary directory. Some people like to keep all -# the Exim files under one directory such as /usr/exim; others just let the -# Exim binaries go into an existing directory such as /usr/sbin or -# /usr/local/sbin. The installation script will try to create this directory, -# and any superior directories, if they do not exist. - BIN_DIRECTORY=/usr/sbin - - -#------------------------------------------------------------------------------ -# CONFIGURE_FILE defines where Exim's run time configuration file is to be -# found. It is the complete pathname for the file, not just a directory. The -# location of all other run time files and directories can be changed in the -# run time configuration file. There is a lot of variety in the choice of -# location in different OS, and in the preferences of different sysadmins. Some -# common locations are in /etc or /etc/mail or /usr/local/etc or -# /usr/local/etc/mail. Another possibility is to keep all the Exim files under -# a single directory such as /usr/exim. Whatever you choose, the installation -# script will try to make the directory and any superior directories if they -# don't exist. It will also install a default runtime configuration if this -# file does not exist. - CONFIGURE_FILE=/etc/mail/exim.conf - -# It is possible to specify a colon-separated list of files for CONFIGURE_FILE. -# In this case, Exim will use the first of them that exists when it is run. -# However, if a list is specified, the installation script no longer tries to -# make superior directories or to install a default runtime configuration. - - -#------------------------------------------------------------------------------ -# The Exim binary must normally be setuid root, so that it starts executing as -# root, but (depending on the options with which it is called) it does not -# always need to retain the root privilege. These settings define the user and -# group that is used for Exim processes when they no longer need to be root. In -# particular, this applies when receiving messages and when doing remote -# deliveries. (Local deliveries run as various non-root users, typically as the -# owner of a local mailbox.) Specifying these values as root is not supported. - EXIM_USER=ref:mail - -# If you specify EXIM_USER as a name, this is looked up at build time, and the -# uid number is built into the binary. However, you can specify that this -# lookup is deferred until runtime. In this case, it is the name that is built -# into the binary. You can do this by a setting of the form: - -# EXIM_USER=ref:exim - -# In other words, put "ref:" in front of the user name. If you set EXIM_USER -# like this, any value specified for EXIM_GROUP is also passed "by reference". -# Although this costs a bit of resource at runtime, it is convenient to use -# this feature when building binaries that are to be run on multiple systems -# where the name may refer to different uids. It also allows you to build Exim -# on a system where there is no Exim user defined. - -# If the setting of EXIM_USER is numeric (e.g. EXIM_USER=42), there must -# also be a setting of EXIM_GROUP. If, on the other hand, you use a name -# for EXIM_USER (e.g. EXIM_USER=exim), you don't need to set EXIM_GROUP unless -# you want to use a group other than the default group for the given user. - -# EXIM_GROUP= - -# Many sites define a user called "exim", with an appropriate default group, -# and use -# -# EXIM_USER=exim -# -# while leaving EXIM_GROUP unspecified (commented out). - - -#------------------------------------------------------------------------------ -# SPOOL_DIRECTORY defines the directory where all the data for messages in -# transit is kept. It is strongly recommended that you define it here, though -# it is possible to leave this till the run time configuration. - -# Exim creates the spool directory if it does not exist. The owner and group -# will be those defined by EXIM_USER and EXIM_GROUP, and this also applies to -# all the files and directories that are created in the spool directory. - -# Almost all installations choose this: - SPOOL_DIRECTORY=/var/spool/exim - - - -############################################################################### -# THESE ARE THINGS YOU PROBABLY WANT TO SPECIFY # -############################################################################### - -# If you need extra header file search paths on all compiles, put the -I -# options in INCLUDE. If you want the extra searches only for certain -# parts of the build, see more specific xxx_INCLUDE variables below. - -# INCLUDE=-I/example/include - -# You need to specify some routers and transports if you want the Exim that you -# are building to be capable of delivering mail. You almost certainly need at -# least one type of lookup. You should consider whether you want to build -# the Exim monitor or not. - - -#------------------------------------------------------------------------------ -# These settings determine which individual router drivers are included in the -# Exim binary. There are no defaults in the code; those routers that are wanted -# must be defined here by setting the appropriate variables to the value "yes". -# Including a router in the binary does not cause it to be used automatically. -# It has also to be configured in the run time configuration file. By -# commenting out those you know you don't want to use, you can make the binary -# a bit smaller. If you are unsure, leave all of these included for now. - ROUTER_ACCEPT=yes ROUTER_DNSLOOKUP=yes ROUTER_IPLITERAL=yes ROUTER_MANUALROUTE=yes ROUTER_QUERYPROGRAM=yes ROUTER_REDIRECT=yes - -# This one is very special-purpose, so is not included by default. - -# ROUTER_IPLOOKUP=yes - - -#------------------------------------------------------------------------------ -# These settings determine which individual transport drivers are included in -# the Exim binary. There are no defaults; those transports that are wanted must -# be defined here by setting the appropriate variables to the value "yes". -# Including a transport in the binary does not cause it to be used -# automatically. It has also to be configured in the run time configuration -# file. By commenting out those you know you don't want to use, you can make -# the binary a bit smaller. If you are unsure, leave all of these included for -# now. - TRANSPORT_APPENDFILE=yes TRANSPORT_AUTOREPLY=yes TRANSPORT_PIPE=yes TRANSPORT_SMTP=yes - -# This one is special-purpose, and commonly not required, so it is not -# included by default. - TRANSPORT_LMTP=yes - - -#------------------------------------------------------------------------------ -# The appendfile transport can write messages to local mailboxes in a number -# of formats. The code for three specialist formats, maildir, mailstore, and -# MBX, is included only when requested. If you do not know what this is about, -# leave these settings commented out. - SUPPORT_MAILDIR=yes -# SUPPORT_MAILSTORE=yes -# SUPPORT_MBX=yes - - -#------------------------------------------------------------------------------ -# See below for dynamic lookup modules. -# LOOKUP_MODULE_DIR=/usr/lib/exim/lookups/ -# If not using package management but using this anyway, then think about how -# you perform upgrades and revert them. You should consider the benefit of -# embedding the Exim version number into LOOKUP_MODULE_DIR, so that you can -# maintain two concurrent sets of modules. - -# To build a module dynamically, you'll need to define CFLAGS_DYNAMIC for -# your platform. Eg: -# CFLAGS_DYNAMIC=-shared -rdynamic -# CFLAGS_DYNAMIC=-shared -rdynamic -fPIC - -#------------------------------------------------------------------------------ -# These settings determine which file and database lookup methods are included -# in the binary. See the manual chapter entitled "File and database lookups" -# for discussion. DBM and lsearch (linear search) are included by default. If -# you are unsure about the others, leave them commented out for now. -# LOOKUP_DNSDB does *not* refer to general mail routing using the DNS. It is -# for the specialist case of using the DNS as a general database facility (not -# common). -# If set to "2" instead of "yes" then the corresponding lookup will be -# built as a module and must be installed into LOOKUP_MODULE_DIR. You need to -# add -export-dynamic -rdynamic to EXTRALIBS. You may also need to add -ldl to -# EXTRALIBS so that dlopen() is available to Exim. You need to define -# LOOKUP_MODULE_DIR above so the exim binary actually loads dynamic lookup -# modules. -# Also, instead of adding all the libraries/includes to LOOKUP_INCLUDE and -# LOOKUP_LIBS, add them to the respective LOOKUP_*_INCLUDE and LOOKUP_*_LIBS -# (where * is the name as given here in this list). That ensures that only -# the dynamic library and not the exim binary will be linked against the -# library. -# NOTE: LDAP cannot be built as a module! - +LOOKUP_MODULE_DIR=/usr/lib/exim/ +CFLAGS_DYNAMIC=-shared -rdynamic -fPIC LOOKUP_DBM=yes LOOKUP_LSEARCH=yes -LOOKUP_DNSDB=yes - -# LOOKUP_CDB=yes +LOOKUP_DNSDB=2 +LOOKUP_CDB=2 LOOKUP_DSEARCH=yes -# LOOKUP_IBASE=yes -# LOOKUP_LDAP=yes -# LOOKUP_MYSQL=yes -# LOOKUP_NIS=yes -# LOOKUP_NISPLUS=yes -# LOOKUP_ORACLE=yes -# LOOKUP_PASSWD=yes -# LOOKUP_PGSQL=yes -# LOOKUP_SQLITE=yes -# LOOKUP_WHOSON=yes - -# These two settings are obsolete; all three lookups are compiled when -# LOOKUP_LSEARCH is enabled. However, we retain these for backward -# compatibility. Setting one forces LOOKUP_LSEARCH if it is not set. - -# LOOKUP_WILDLSEARCH=yes -# LOOKUP_NWILDLSEARCH=yes - - -#------------------------------------------------------------------------------ -# If you have set LOOKUP_LDAP=yes, you should set LDAP_LIB_TYPE to indicate -# which LDAP library you have. Unfortunately, though most of their functions -# are the same, there are minor differences. Currently Exim knows about four -# LDAP libraries: the one from the University of Michigan (also known as -# OpenLDAP 1), OpenLDAP 2, the Netscape SDK library, and the library that comes -# with Solaris 7 onwards. Uncomment whichever of these you are using. - -# LDAP_LIB_TYPE=OPENLDAP1 -# LDAP_LIB_TYPE=OPENLDAP2 -# LDAP_LIB_TYPE=NETSCAPE -# LDAP_LIB_TYPE=SOLARIS - -# If you don't set any of these, Exim assumes the original University of -# Michigan (OpenLDAP 1) library. - - -#------------------------------------------------------------------------------ -# The PCRE library is required for exim. There is no longer an embedded -# version of the PCRE library included with the source code, instead you -# must use a system library or build your own copy of PCRE. -# In either case you must specify the library link info here. If the -# PCRE header files are not in the standard search path you must also -# modify the INCLUDE path (above) -# The default setting of PCRE_LIBS should work on the vast majority of -# systems - +LOOKUP_MYSQL=2 +LOOKUP_MYSQL_INCLUDE=-I/usr/include/mysql +LOOKUP_MYSQL_LIBS=-lmysqlclient +LOOKUP_PASSWD=2 +LOOKUP_PGSQL=2 +LOOKUP_PGSQL_INCLUDE=-I/usr/include/postgresql +LOOKUP_PGSQL_LIBS=-lpq +LOOKUP_SQLITE=2 +LOOKUP_SQLITE_LIBS=-lsqlite3 PCRE_LIBS=-lpcre - - -#------------------------------------------------------------------------------ -# Additional libraries and include directories may be required for some -# lookup styles (e.g. LDAP, MYSQL or PGSQL). LOOKUP_LIBS is included only on -# the command for linking Exim itself, not on any auxiliary programs. You -# don't need to set LOOKUP_INCLUDE if the relevant directories are already -# specified in INCLUDE. The settings below are just examples; -lpq is for -# PostgreSQL, -lgds is for Interbase, -lsqlite3 is for SQLite. - -# LOOKUP_INCLUDE=-I /usr/local/ldap/include -I /usr/local/mysql/include -I /usr/local/pgsql/include -# LOOKUP_LIBS=-L/usr/local/lib -lldap -llber -lmysqlclient -lpq -lgds -lsqlite3 - - -#------------------------------------------------------------------------------ -# Compiling the Exim monitor: If you want to compile the Exim monitor, a -# program that requires an X11 display, then EXIM_MONITOR should be set to the -# value "eximon.bin". Comment out this setting to disable compilation of the -# monitor. The locations of various X11 directories for libraries and include -# files are defaulted in the OS/Makefile-Default file, but can be overridden in -# local OS-specific make files. - - - - -#------------------------------------------------------------------------------ -# Compiling Exim with content scanning support: If you want to compile Exim -# with support for message body content scanning, set WITH_CONTENT_SCAN to -# the value "yes". This will give you malware and spam scanning in the DATA ACL, -# and the MIME ACL. Please read the documentation to learn more about these -# features. - WITH_CONTENT_SCAN=yes - -# If you want to use the deprecated "demime" condition in the DATA ACL, -# uncomment the line below. Doing so will also explicitly turn on the -# WITH_CONTENT_SCAN option. If possible, use the MIME ACL instead of -# the "demime" condition. - WITH_OLD_DEMIME=yes - -# If you're using ClamAV and are backporting fixes to an old version, instead -# of staying current (which is the more usual approach) then you may need to -# use an older API which uses a STREAM command, now deprecated, instead of -# zINSTREAM. If you need to set this, please let the Exim developers know, as -# if nobody reports a need for it, we'll remove this option and clean up the -# code. zINSTREAM was introduced with ClamAV 0.95. -# -# WITH_OLD_CLAMAV_STREAM=yes - -#------------------------------------------------------------------------------ -# By default Exim includes code to support DKIM (DomainKeys Identified -# Mail, RFC4871) signing and verification. Verification of signatures is -# turned on by default. See the spec for information on conditionally -# disabling it. To disable the inclusion of the entire feature, set -# DISABLE_DKIM to "yes" - -# DISABLE_DKIM=yes - - -#------------------------------------------------------------------------------ -# Compiling Exim with experimental features. These are documented in -# experimental-spec.txt. "Experimental" means that the way these features are -# implemented may still change. Backward compatibility is not guaranteed. - -# Uncomment the following lines to add SPF support. You need to have libspf2 -# installed on your system (www.libspf2.org). Depending on where it is installed -# you may have to edit the CFLAGS and LDFLAGS lines. - -EXPERIMENTAL_SPF=yes -CFLAGS += -I/usr/local/include +EXPERIMENTAL_SPF=2 LDFLAGS += -lspf2 - -# Uncomment the following lines to add SRS (Sender rewriting scheme) support. -# You need to have libsrs_alt installed on your system (srs.mirtol.com). -# Depending on where it is installed you may have to edit the CFLAGS and -# LDFLAGS lines. - -# EXPERIMENTAL_SRS=yes -# CFLAGS += -I/usr/local/include -# LDFLAGS += -lsrs_alt - -# Uncomment the following lines to add Brightmail AntiSpam support. You need -# to have the Brightmail client SDK installed. Please check the experimental -# documentation for implementation details. You need to edit the CFLAGS and -# LDFLAGS lines. - -# EXPERIMENTAL_BRIGHTMAIL=yes -# CFLAGS += -I/opt/brightmail/bsdk-6.0/include -# LDFLAGS += -lxml2_single -lbmiclient_single -L/opt/brightmail/bsdk-6.0/lib - - - -############################################################################### -# THESE ARE THINGS YOU MIGHT WANT TO SPECIFY # -############################################################################### - -# The items in this section are those that are commonly changed according to -# the sysadmin's preferences, but whose defaults are often acceptable. The -# first five are concerned with security issues, where differing levels of -# paranoia are appropriate in different environments. Sysadmins also vary in -# their views on appropriate levels of defence in these areas. If you do not -# understand these issues, go with the defaults, which are used by many sites. - - -#------------------------------------------------------------------------------ -# Although Exim is normally a setuid program, owned by root, it refuses to run -# local deliveries as root by default. There is a runtime option called -# "never_users" which lists the users that must never be used for local -# deliveries. There is also the setting below, which provides a list that -# cannot be overridden at runtime. This guards against problems caused by -# unauthorized changes to the runtime configuration. You are advised not to -# remove "root" from this option, but you can add other users if you want. The -# list is colon-separated. It must NOT contain any spaces. - -# FIXED_NEVER_USERS=root:bin:daemon FIXED_NEVER_USERS=root - - -#------------------------------------------------------------------------------ -# By default, Exim insists that its configuration file be owned by root. You -# can specify one additional permitted owner here. - -# CONFIGURE_OWNER= - -# If the configuration file is group-writeable, Exim insists by default that it -# is owned by root. You can specify one additional permitted group owner here. - -# CONFIGURE_GROUP= - -# If you specify CONFIGURE_OWNER or CONFIGURE_GROUP as a name, this is looked -# up at build time, and the uid or gid number is built into the binary. -# However, you can specify that the lookup is deferred until runtime. In this -# case, it is the name that is built into the binary. You can do this by a -# setting of the form: - -# CONFIGURE_OWNER=ref:mail -# CONFIGURE_GROUP=ref:sysadmin - -# In other words, put "ref:" in front of the user or group name. Although this -# costs a bit of resource at runtime, it is convenient to use this feature when -# building binaries that are to be run on multiple systems where the names may -# refer to different uids or gids. It also allows you to build Exim on a system -# where the relevant user or group is not defined. - - -#------------------------------------------------------------------------------ -# The -C option allows Exim to be run with an alternate runtime configuration -# file. When this is used by root, root privilege is retained by the binary -# (for any other caller including the Exim user, it is dropped). You can -# restrict the location of alternate configurations by defining a prefix below. -# Any file used with -C must then start with this prefix (except that /dev/null -# is also permitted if the caller is root, because that is used in the install -# script). If the prefix specifies a directory that is owned by root, a -# compromise of the Exim account does not permit arbitrary alternate -# configurations to be used. The prefix can be more restrictive than just a -# directory (the second example). - -# ALT_CONFIG_PREFIX=/some/directory/ -# ALT_CONFIG_PREFIX=/some/directory/exim.conf- - - -#------------------------------------------------------------------------------ -# When a user other than root uses the -C option to override the configuration -# file (including the Exim user when re-executing Exim to regain root -# privileges for local message delivery), this will normally cause Exim to -# drop root privileges. The TRUSTED_CONFIG_LIST option, specifies a file which -# contains a list of trusted configuration filenames, one per line. If the -C -# option is used by the Exim user or by the user specified in the -# CONFIGURE_OWNER setting, to specify a configuration file which is listed in -# the TRUSTED_CONFIG_LIST file, then root privileges are not dropped by Exim. - -# TRUSTED_CONFIG_LIST=/usr/exim/trusted_configs - - -#------------------------------------------------------------------------------ -# Uncommenting this option disables the use of the -D command line option, -# which changes the values of macros in the runtime configuration file. -# This is another protection against somebody breaking into the Exim account. - -# DISABLE_D_OPTION=yes - - -#------------------------------------------------------------------------------ -# By contrast, you might be maintaining a system which relies upon the ability -# to override values with -D and assumes that these will be passed through to -# the delivery processes. As of Exim 4.73, this is no longer the case by -# default. Going forward, we strongly recommend that you use a shim Exim -# configuration file owned by root stored under TRUSTED_CONFIG_LIST. -# That shim can set macros before .include'ing your main configuration file. -# -# As a strictly transient measure to ease migration to 4.73, the -# WHITELIST_D_MACROS value definies a colon-separated list of macro-names -# which are permitted to be overridden from the command-line which will be -# honoured by the Exim user. So these are macros that can persist to delivery -# time. -# Examples might be -DTLS or -DSPOOL=/some/dir. The values on the -# command-line are filtered to only permit: [A-Za-z0-9_/.-]* -# -# This option is highly likely to be removed in a future release. It exists -# only to make 4.73 as easy as possible to migrate to. If you use it, we -# encourage you to schedule time to rework your configuration to not depend -# upon it. Most people should not need to use this. -# -# By default, no macros are whitelisted for -D usage. - -# WHITELIST_D_MACROS=TLS:SPOOL - -#------------------------------------------------------------------------------ -# Exim has support for the AUTH (authentication) extension of the SMTP -# protocol, as defined by RFC 2554. If you don't know what SMTP authentication -# is, you probably won't want to include this code, so you should leave these -# settings commented out. If you do want to make use of SMTP authentication, -# you must uncomment at least one of the following, so that appropriate code is -# included in the Exim binary. You will then need to set up the run time -# configuration to make use of the mechanism(s) selected. - AUTH_CRAM_MD5=yes -# AUTH_CYRUS_SASL=yes AUTH_DOVECOT=yes AUTH_PLAINTEXT=yes AUTH_SPA=yes - - -#------------------------------------------------------------------------------ -# If you specified AUTH_CYRUS_SASL above, you should ensure that you have the -# Cyrus SASL library installed before trying to build Exim, and you probably -# want to uncomment the following line: - -# AUTH_LIBS=-lsasl2 - - -#------------------------------------------------------------------------------ -# When Exim is decoding MIME "words" in header lines, most commonly for use -# in the $header_xxx expansion, it converts any foreign character sets to the -# one that is set in the headers_charset option. The default setting is -# defined by this setting: - HEADERS_CHARSET="ISO-8859-1" - -# If you are going to make use of $header_xxx expansions in your configuration -# file, or if your users are going to use them in filter files, and the normal -# character set on your host is something other than ISO-8859-1, you might -# like to specify a different default here. This value can be overridden in -# the runtime configuration, and it can also be overridden in individual filter -# files. -# -# IMPORTANT NOTE: The iconv() function is needed for character code -# conversions. Please see the next item... - - -#------------------------------------------------------------------------------ -# Character code conversions are possible only if the iconv() function is -# installed on your operating system. There are two places in Exim where this -# is relevant: (a) The $header_xxx expansion (see the previous item), and (b) -# the Sieve filter support. For those OS where iconv() is known to be installed -# as standard, the file in OS/Makefile-xxxx contains -# -# HAVE_ICONV=yes -# -# If you are not using one of those systems, but have installed iconv(), you -# need to uncomment that line above. In some cases, you may find that iconv() -# and its header file are not in the default places. You might need to use -# something like this: -# -# HAVE_ICONV=yes -# CFLAGS=-O -I/usr/local/include -# EXTRALIBS_EXIM=-L/usr/local/lib -liconv -# -# but of course there may need to be other things in CFLAGS and EXTRALIBS_EXIM -# as well. - - -#------------------------------------------------------------------------------ -# The passwords for user accounts are normally encrypted with the crypt() -# function. Comparisons with encrypted passwords can be done using Exim's -# "crypteq" expansion operator. (This is commonly used as part of the -# configuration of an authenticator for use with SMTP AUTH.) At least one -# operating system has an extended function called crypt16(), which uses up to -# 16 characters of a password (the normal crypt() uses only the first 8). Exim -# supports the use of crypt16() as well as crypt() but note the warning below. - -# You can always indicate a crypt16-encrypted password by preceding it with -# "{crypt16}". If you want the default handling (without any preceding -# indicator) to use crypt16(), uncomment the following line: - -# DEFAULT_CRYPT=crypt16 - -# If you do that, you can still access the basic crypt() function by preceding -# an encrypted password with "{crypt}". For more details, see the description -# of the "crypteq" condition in the manual chapter on string expansions. - -# Some operating systems do not include a crypt16() function, so Exim has one -# of its own, which it uses unless HAVE_CRYPT16 is defined. Normally, that will -# be set in an OS-specific Makefile for the OS that have such a function, so -# you should not need to bother with it. - -# *** WARNING *** WARNING *** WARNING *** WARNING *** WARNING *** -# It turns out that the above is not entirely accurate. As well as crypt16() -# there is a function called bigcrypt() that some operating systems have. This -# may or may not use the same algorithm, and both of them may be different to -# Exim's built-in crypt16() that is used unless HAVE_CRYPT16 is defined. -# -# However, since there is now a move away from the traditional crypt() -# functions towards using SHA1 and other algorithms, tidying up this area of -# Exim is seen as very low priority. In practice, if you need to, you can -# define DEFAULT_CRYPT to the name of any function that has the same interface -# as the traditional crypt() function. -# *** WARNING *** WARNING *** WARNING *** WARNING *** WARNING *** - - -#------------------------------------------------------------------------------ -# Exim can be built to support the SMTP STARTTLS command, which implements -# Transport Layer Security using SSL (Secure Sockets Layer). To do this, you -# must install the OpenSSL library package or the GnuTLS library. Exim contains -# no cryptographic code of its own. Uncomment the following lines if you want -# to build Exim with TLS support. If you don't know what this is all about, -# leave these settings commented out. - -# This setting is required for any TLS support (either OpenSSL or GnuTLS) +EXTRALIBS_EXIM=-export-dynamic -rdynamic -ldl SUPPORT_TLS=yes - -# Uncomment this setting if you are using OpenSSL TLS_LIBS=-lssl -lcrypto - -# Uncomment these settings if you are using GnuTLS -# USE_GNUTLS=yes -# TLS_LIBS=-lgnutls -ltasn1 -lgcrypt - -# If you are running Exim as a server, note that just building it with TLS -# support is not all you need to do. You also need to set up a suitable -# certificate, and tell Exim about it by means of the tls_certificate -# and tls_privatekey run time options. You also need to set tls_advertise_hosts -# to specify the hosts to which Exim advertises TLS support. On the other hand, -# if you are running Exim only as a client, building it with TLS support -# is all you need to do. - -# Additional libraries and include files are required for both OpenSSL and -# GnuTLS. The TLS_LIBS settings above assume that the libraries are installed -# with all your other libraries. If they are in a special directory, you may -# need something like - -# TLS_LIBS=-L/usr/local/openssl/lib -lssl -lcrypto -# or -# TLS_LIBS=-L/opt/gnu/lib -lgnutls -ltasn1 -lgcrypt - -# TLS_LIBS is included only on the command for linking Exim itself, not on any -# auxiliary programs. If the include files are not in a standard place, you can -# set TLS_INCLUDE to specify where they are, for example: - -# TLS_INCLUDE=-I/usr/local/openssl/include/ -# or -# TLS_INCLUDE=-I/opt/gnu/include - -# You don't need to set TLS_INCLUDE if the relevant directories are already -# specified in INCLUDE. - - -#------------------------------------------------------------------------------ -# The default distribution of Exim contains only the plain text form of the -# documentation. Other forms are available separately. If you want to install -# the documentation in "info" format, first fetch the Texinfo documentation -# sources from the ftp directory and unpack them, which should create files -# with the extension "texinfo" in the doc directory. You may find that the -# version number of the texinfo files is different to your Exim version number, -# because the main documentation isn't updated as often as the code. For -# example, if you have Exim version 4.43, the source tarball upacks into a -# directory called exim-4.43, but the texinfo tarball unpacks into exim-4.40. -# In this case, move the contents of exim-4.40/doc into exim-4.43/doc after you -# have unpacked them. Then set INFO_DIRECTORY to the location of your info -# directory. This varies from system to system, but is often /usr/share/info. -# Once you have done this, "make install" will build the info files and -# install them in the directory you have defined. - -# INFO_DIRECTORY=/usr/share/info - - -#------------------------------------------------------------------------------ -# Exim log directory and files: Exim creates several log files inside a -# single log directory. You can define the directory and the form of the -# log file name here. If you do not set anything, Exim creates a directory -# called "log" inside its spool directory (see SPOOL_DIRECTORY above) and uses -# the filenames "mainlog", "paniclog", and "rejectlog". If you want to change -# this, you can set LOG_FILE_PATH to a path name containing one occurrence of -# %s. This will be replaced by one of the strings "main", "panic", or "reject" -# to form the final file names. Some installations may want something like this: - -LOG_FILE_PATH=/var/log/exim/%slog - -# which results in files with names /var/log/exim_mainlog, etc. The directory -# in which the log files are placed must exist; Exim does not try to create -# it for itself. It is also your responsibility to ensure that Exim is capable -# of writing files using this path name. The Exim user (see EXIM_USER above) -# must be able to create and update files in the directory you have specified. - -# You can also configure Exim to use syslog, instead of or as well as log -# files, by settings such as these - -# LOG_FILE_PATH=syslog -# LOG_FILE_PATH=syslog:/var/log/exim_%slog - -# The first of these uses only syslog; the second uses syslog and also writes -# to log files. Do not include white space in such a setting as it messes up -# the building process. - - -#------------------------------------------------------------------------------ -# When logging to syslog, the following option caters for syslog replacements -# that are able to accept log entries longer than the 1024 characters allowed -# by RFC 3164. It is up to you to make sure your syslog daemon can handle this. -# Non-printable characters are usually unacceptable regardless, so log entries -# are still split on newline characters. - -# SYSLOG_LONG_LINES=yes - -# If you are not interested in the process identifier (pid) of the Exim that is -# making the call to syslog, then comment out the following line. - -SYSLOG_LOG_PID=yes - - -#------------------------------------------------------------------------------ -# Cycling log files: this variable specifies the maximum number of old -# log files that are kept by the exicyclog log-cycling script. You don't have -# to use exicyclog. If your operating system has other ways of cycling log -# files, you can use them instead. The exicyclog script isn't run by default; -# you have to set up a cron job for it if you want it. - +LOG_FILE_PATH=syslog:/var/log/exim/%slog +SYSLOG_LOG_PID=no EXICYCLOG_MAX=10 - - -#------------------------------------------------------------------------------ -# The compress command is used by the exicyclog script to compress old log -# files. Both the name of the command and the suffix that it adds to files -# need to be defined here. See also the EXICYCLOG_MAX configuration. - COMPRESS_COMMAND=/bin/gzip COMPRESS_SUFFIX=gz - - -#------------------------------------------------------------------------------ -# If the exigrep utility is fed compressed log files, it tries to uncompress -# them using this command. - ZCAT_COMMAND=/bin/zcat - - -#------------------------------------------------------------------------------ -# Compiling in support for embedded Perl: If you want to be able to -# use Perl code in Exim's string manipulation language and you have Perl -# (version 5.004 or later) installed, set EXIM_PERL to perl.o. Using embedded -# Perl costs quite a lot of resources. Only do this if you really need it. - -# EXIM_PERL=perl.o - - -#------------------------------------------------------------------------------ -# Support for dynamically-loaded string expansion functions via ${dlfunc. If -# you are using gcc the dynamically-loaded object must be compiled with the -# -shared option, and you will need to add -export-dynamic to EXTRALIBS so -# that the local_scan API is made available by the linker. You may also need -# to add -ldl to EXTRALIBS so that dlopen() is available to Exim. - -# EXPAND_DLFUNC=yes - - -#------------------------------------------------------------------------------ -# Exim has support for PAM (Pluggable Authentication Modules), a facility -# which is available in the latest releases of Solaris and in some GNU/Linux -# distributions (see http://ftp.kernel.org/pub/linux/libs/pam/). The Exim -# support, which is intended for use in conjunction with the SMTP AUTH -# facilities, is included only when requested by the following setting: - -# SUPPORT_PAM=yes - -# You probably need to add -lpam to EXTRALIBS, and in some releases of -# GNU/Linux -ldl is also needed. - - -#------------------------------------------------------------------------------ -# Support for authentication via Radius is also available. The Exim support, -# which is intended for use in conjunction with the SMTP AUTH facilities, -# is included only when requested by setting the following parameter to the -# location of your Radius configuration file: - -# RADIUS_CONFIG_FILE=/etc/radiusclient/radiusclient.conf -# RADIUS_CONFIG_FILE=/etc/radius.conf - -# If you have set RADIUS_CONFIG_FILE, you should also set one of these to -# indicate which RADIUS library is used: - -# RADIUS_LIB_TYPE=RADIUSCLIENT -# RADIUS_LIB_TYPE=RADIUSCLIENTNEW -# RADIUS_LIB_TYPE=RADLIB - -# RADIUSCLIENT is the radiusclient library; you probably need to add -# -lradiusclient to EXTRALIBS. -# -# The API for the radiusclient library was changed at release 0.4.0. -# Unfortunately, the header file does not define a version number that clients -# can use to support both the old and new APIs. If you are using version 0.4.0 -# or later of the radiusclient library, you should use RADIUSCLIENTNEW. -# -# RADLIB is the Radius library that comes with FreeBSD (the header file is -# called radlib.h); you probably need to add -lradius to EXTRALIBS. -# -# If you do not set RADIUS_LIB_TYPE, Exim assumes the radiusclient library, -# using the original API. - - -#------------------------------------------------------------------------------ -# Support for authentication via the Cyrus SASL pwcheck daemon is available. -# Note, however, that pwcheck is now deprecated in favour of saslauthd (see -# next item). The Exim support for pwcheck, which is intented for use in -# conjunction with the SMTP AUTH facilities, is included only when requested by -# setting the following parameter to the location of the pwcheck daemon's -# socket. -# -# There is no need to install all of SASL on your system. You just need to run -# ./configure --with-pwcheck, cd to the pwcheck directory within the sources, -# make and make install. You must create the socket directory (default -# /var/pwcheck) and chown it to exim's user and group. Once you have installed -# pwcheck, you should arrange for it to be started by root at boot time. - -# CYRUS_PWCHECK_SOCKET=/var/pwcheck/pwcheck - - -#------------------------------------------------------------------------------ -# Support for authentication via the Cyrus SASL saslauthd daemon is available. -# The Exim support, which is intented for use in conjunction with the SMTP AUTH -# facilities, is included only when requested by setting the following -# parameter to the location of the saslauthd daemon's socket. -# -# There is no need to install all of SASL on your system. You just need to run -# ./configure --with-saslauthd (and any other options you need, for example, to -# select or deselect authentication mechanisms), cd to the saslauthd directory -# within the sources, make and make install. You must create the socket -# directory (default /var/state/saslauthd) and chown it to exim's user and -# group. Once you have installed saslauthd, you should arrange for it to be -# started by root at boot time. - -# CYRUS_SASLAUTHD_SOCKET=/var/state/saslauthd/mux - - -#------------------------------------------------------------------------------ -# TCP wrappers: If you want to use tcpwrappers from within Exim, uncomment -# this setting. See the manual section entitled "Use of tcpwrappers" in the -# chapter on building and installing Exim. -# -# USE_TCP_WRAPPERS=yes -# -# You may well also have to specify a local "include" file and an additional -# library for TCP wrappers, so you probably need something like this: -# -# USE_TCP_WRAPPERS=yes -# CFLAGS=-O -I/usr/local/include -# EXTRALIBS_EXIM=-L/usr/local/lib -lwrap -# -# but of course there may need to be other things in CFLAGS and EXTRALIBS_EXIM -# as well. -# -# To use a name other than exim in the tcpwrappers config file, -# e.g. if you're running multiple daemons with different access lists, -# or multiple MTAs with the same access list, define -# TCP_WRAPPERS_DAEMON_NAME accordingly -# -# TCP_WRAPPERS_DAEMON_NAME="exim" - - -#------------------------------------------------------------------------------ -# The default action of the exim_install script (which is run by "make -# install") is to install the Exim binary with a unique name such as -# exim-4.43-1, and then set up a symbolic link called "exim" to reference it, -# moving the symbolic link from any previous version. If you define NO_SYMLINK -# (the value doesn't matter), the symbolic link is not created or moved. You -# will then have to "turn Exim on" by setting up the link manually. - -# NO_SYMLINK=yes - - -#------------------------------------------------------------------------------ -# Another default action of the install script is to install a default runtime -# configuration file if one does not exist. This configuration has a router for -# expanding system aliases. The default assumes that these aliases are kept -# in the traditional file called /etc/aliases. If such a file does not exist, -# the installation script creates one that contains just comments (no actual -# aliases). The following setting can be changed to specify a different -# location for the system alias file. - +EXPAND_DLFUNC=yes +NO_SYMLINK=yes SYSTEM_ALIASES_FILE=/etc/mail/aliases - - -#------------------------------------------------------------------------------ -# There are some testing options (-be, -bt, -bv) that read data from the -# standard input when no arguments are supplied. By default, the input lines -# are read using the standard fgets() function. This does not support line -# editing during interactive input (though the terminal's "erase" character -# works as normal). If your operating system has the readline() function, and -# in addition supports dynamic loading of library functions, you can cause -# Exim to use readline() for the -be testing option (only) by uncommenting the -# following setting. Dynamic loading is used so that the library is loaded only -# when the -be testing option is given; by the time the loading occurs, -# Exim has given up its root privilege and is running as the calling user. This -# is the reason why readline() is NOT supported for -bt and -bv, because Exim -# runs as root or as exim, respectively, for those options. When USE_READLINE -# is "yes", as well as supporting line editing, a history of input lines in the -# current run is maintained. - -# USE_READLINE=yes - -# You may need to add -ldl to EXTRALIBS when you set USE_READLINE=yes. -# Note that this option adds to the size of the Exim binary, because the -# dynamic loading library is not otherwise included. - - - -############################################################################### -# THINGS YOU ALMOST NEVER NEED TO MENTION # -############################################################################### - -# The settings in this section are available for use in special circumstances. -# In the vast majority of installations you need not change anything below. - - -#------------------------------------------------------------------------------ -# The following commands live in different places in some OS. Either the -# ultimate default settings, or the OS-specific files should already point to -# the right place, but they can be overridden here if necessary. These settings -# are used when building various scripts to ensure that the correct paths are -# used when the scripts are run. They are not used in the Makefile itself. Perl -# is not necessary for running Exim unless you set EXIM_PERL (see above) to get -# it embedded, but there are some utilities that are Perl scripts. If you -# haven't got Perl, Exim will still build and run; you just won't be able to -# use those utilities. - -# CHOWN_COMMAND=/usr/bin/chown -# CHGRP_COMMAND=/usr/bin/chgrp -# CHMOD_COMMAND=/usr/bin/chmod -# MV_COMMAND=/bin/mv -# RM_COMMAND=/bin/rm -# TOUCH_COMMAND=/usr/bin/touch -# PERL_COMMAND=/usr/bin/perl - - -#------------------------------------------------------------------------------ -# The following macro can be used to change the command for building a library -# of functions. By default the "ar" command is used, with options "cq". -# Only in rare circumstances should you need to change this. - -# AR=ar cq - - -#------------------------------------------------------------------------------ -# In some operating systems, the value of the TMPDIR environment variable -# controls where temporary files are created. Exim does not make use of -# temporary files, except when delivering to MBX mailboxes. However, if Exim -# calls any external libraries (e.g. DBM libraries), they may use temporary -# files, and thus be influenced by the value of TMPDIR. For this reason, when -# Exim starts, it checks the environment for TMPDIR, and if it finds it is set, -# it replaces the value with what is defined here. Commenting this setting -# suppresses the check altogether. - TMPDIR="/tmp" - - -#------------------------------------------------------------------------------ -# The following macros can be used to change the default modes that are used -# by the appendfile transport. In most installations the defaults are just -# fine, and in any case, you can change particular instances of the transport -# at run time if you want. - -# APPENDFILE_MODE=0600 -# APPENDFILE_DIRECTORY_MODE=0700 -# APPENDFILE_LOCKFILE_MODE=0600 - - -#------------------------------------------------------------------------------ -# In some installations there may be multiple machines sharing file systems, -# where a different configuration file is required for Exim on the different -# machines. If CONFIGURE_FILE_USE_NODE is defined, then Exim will first look -# for a configuration file whose name is that defined by CONFIGURE_FILE, -# with the node name obtained by uname() tacked on the end, separated by a -# period (for example, /usr/exim/configure.host.in.some.domain). If this file -# does not exist, then the bare configuration file name is tried. - -# CONFIGURE_FILE_USE_NODE=yes - - -#------------------------------------------------------------------------------ -# In some esoteric configurations two different versions of Exim are run, -# with different setuid values, and different configuration files are required -# to handle the different cases. If CONFIGURE_FILE_USE_EUID is defined, then -# Exim will first look for a configuration file whose name is that defined -# by CONFIGURE_FILE, with the effective uid tacked on the end, separated by -# a period (for eximple, /usr/exim/configure.0). If this file does not exist, -# then the bare configuration file name is tried. In the case when both -# CONFIGURE_FILE_USE_EUID and CONFIGURE_FILE_USE_NODE are set, four files -# are tried: <name>.<euid>.<node>, <name>.<node>, <name>.<euid>, and <name>. - -# CONFIGURE_FILE_USE_EUID=yes - - -#------------------------------------------------------------------------------ -# The size of the delivery buffers: These specify the sizes (in bytes) of -# the buffers that are used when copying a message from the spool to a -# destination. There is rarely any need to change these values. - -# DELIVER_IN_BUFFER_SIZE=8192 -# DELIVER_OUT_BUFFER_SIZE=8192 - - -#------------------------------------------------------------------------------ -# The mode of the database directory: Exim creates a directory called "db" -# in its spool directory, to hold its databases of hints. This variable -# determines the mode of the created directory. The default value in the -# source is 0750. - -# EXIMDB_DIRECTORY_MODE=0750 - - -#------------------------------------------------------------------------------ -# Database file mode: The mode of files created in the "db" directory defaults -# to 0640 in the source, and can be changed here. - -# EXIMDB_MODE=0640 - - -#------------------------------------------------------------------------------ -# Database lock file mode: The mode of zero-length files created in the "db" -# directory to use for locking purposes defaults to 0640 in the source, and -# can be changed here. - -# EXIMDB_LOCKFILE_MODE=0640 - - -#------------------------------------------------------------------------------ -# This parameter sets the maximum length of the header portion of a message -# that Exim is prepared to process. The default setting is one megabyte. The -# limit exists in order to catch rogue mailers that might connect to your SMTP -# port, start off a header line, and then just pump junk at it for ever. The -# message_size_limit option would also catch this, but it may not be set. -# The value set here is the default; it can be changed at runtime. - -# HEADER_MAXSIZE="(1024*1024)" - - -#------------------------------------------------------------------------------ -# The mode of the input directory: The input directory is where messages are -# kept while awaiting delivery. Exim creates it if necessary, using a mode -# which can be defined here (default 0750). - -# INPUT_DIRECTORY_MODE=0750 - - -#------------------------------------------------------------------------------ -# The mode of Exim's log directory, when it is created by Exim inside the spool -# directory, defaults to 0750 but can be changed here. - -# LOG_DIRECTORY_MODE=0750 - - -#------------------------------------------------------------------------------ -# The log files themselves are created as required, with a mode that defaults -# to 0640, but which can be changed here. - -# LOG_MODE=0640 - - -#------------------------------------------------------------------------------ -# The TESTDB lookup is for performing tests on the handling of lookup results, -# and is not useful for general running. It should be included only when -# debugging the code of Exim. - -# LOOKUP_TESTDB=yes - - -#------------------------------------------------------------------------------ -# /bin/sh is used by default as the shell in which to run commands that are -# defined in the makefiles. This can be changed if necessary, by uncommenting -# this line and specifying another shell, but note that a Bourne-compatible -# shell is expected. - -# MAKE_SHELL=/bin/sh - - -#------------------------------------------------------------------------------ -# The maximum number of named lists of each type (address, domain, host, and -# local part) can be increased by changing this value. It should be set to -# a multiple of 16. - +MAKE_SHELL=/bin/bash MAX_NAMED_LIST=16 - - -#------------------------------------------------------------------------------ -# Network interfaces: Unless you set the local_interfaces option in the runtime -# configuration file to restrict Exim to certain interfaces only, it will run -# code to find all the interfaces there are on your host. Unfortunately, -# the call to the OS that does this requires a buffer large enough to hold -# data for all the interfaces - it was designed in the days when a host rarely -# had more than three or four interfaces. Nowadays hosts can have very many -# virtual interfaces running on the same hardware. If you have more than 250 -# virtual interfaces, you will need to uncomment this setting and increase the -# value. - -# MAXINTERFACES=250 - - -#------------------------------------------------------------------------------ -# Per-message logs: While a message is in the process of being delivered, -# comments on its progress are written to a message log, for the benefit of -# human administrators. These logs are held in a directory called "msglog" -# in the spool directory. Its mode defaults to 0750, but can be changed here. -# The message log directory is also used for storing files that are used by -# transports for returning data to a message's sender (see the "return_output" -# option for transports). - -# MSGLOG_DIRECTORY_MODE=0750 - - -#------------------------------------------------------------------------------ -# There are three options which are used when compiling the Perl interface and -# when linking with Perl. The default values for these are placed automatically -# at the head of the Makefile by the script which builds it. However, if you -# want to override them, you can do so here. - -# PERL_CC= -# PERL_CCOPTS= -# PERL_LIBS= - - -#------------------------------------------------------------------------------ -# Identifying the daemon: When an Exim daemon starts up, it writes its pid -# (process id) to a file so that it can easily be identified. The path of the -# file can be specified here. Some installations may want something like this: - PID_FILE_PATH=/var/run/exim.pid - -# If PID_FILE_PATH is not defined, Exim writes a file in its spool directory -# using the name "exim-daemon.pid". - -# If you start up a daemon without the -bd option (for example, with just -# the -q15m option), a pid file is not written. Also, if you override the -# configuration file with the -oX option, no pid file is written. In other -# words, the pid file is written only for a "standard" daemon. - - -#------------------------------------------------------------------------------ -# If Exim creates the spool directory, it is given this mode, defaulting in the -# source to 0750. - -# SPOOL_DIRECTORY_MODE=0750 - - -#------------------------------------------------------------------------------ -# The mode of files on the input spool which hold the contents of messages can -# be changed here. The default is 0640 so that information from the spool is -# available to anyone who is a member of the Exim group. - -# SPOOL_MODE=0640 - - -#------------------------------------------------------------------------------ -# Moving frozen messages: If the following is uncommented, Exim is compiled -# with support for automatically moving frozen messages out of the main spool -# directory, a facility that is found useful by some large installations. A -# run time option is required to cause the moving actually to occur. Such -# messages become "invisible" to the normal management tools. - -# SUPPORT_MOVE_FROZEN_MESSAGES=yes - - -#------------------------------------------------------------------------------ -# Disabling the use of fsync(): DO NOT UNCOMMENT THE FOLLOWING LINE unless you -# really, really, really know what you are doing. And even then, think again. -# You should never uncomment this when compiling a binary for distribution. -# Use it only when compiling Exim for your own use. -# -# Uncommenting this line enables the use of a runtime option called -# disable_fsync, which can be used to stop Exim using fsync() to ensure that -# files are written to disc before proceeding. When this is disabled, crashes -# and hardware problems such as power outages can cause data to be lost. This -# feature should only be used in very exceptional circumstances. YOU HAVE BEEN -# WARNED. - -# ENABLE_DISABLE_FSYNC=yes - HAVE_IPV6=YES -# LOOKUP_LIBS=-lldap -# EXTRALIBS_EXIM=-lpam -# End of EDITME for Exim 4. diff --git a/testing/exim/exim.logrotate b/testing/exim/exim.logrotate index c923ed1..b789eee 100644 --- a/testing/exim/exim.logrotate +++ b/testing/exim/exim.logrotate @@ -5,7 +5,7 @@ compress delaycompress notifempty - create 640 mail mail + create 640 root mail sharedscripts postrotate /etc/init.d/exim reload > /dev/null diff --git a/testing/exim/exim.pre-install b/testing/exim/exim.pre-install new file mode 100644 index 0000000..42712e6 --- /dev/null +++ b/testing/exim/exim.pre-install @@ -0,0 +1,6 @@ +#!/bin/sh + +addgroup -S -g 12 mail 2>/dev/null +adduser -S -u 8 -h /var/spool/mail -s /sbin/nologin -g mail -G mail -D mail 2>/dev/null + +exit 0 -- 2.2.0 --- Unsubscribe: alpine-devel+unsubscribe@lists.alpinelinux.org Help: alpine-devel+help@lists.alpinelinux.org ---
--- testing/exim/APKBUILD | 1 - testing/exim/exim.logrotate | 2 +- 2 files changed, 1 insertion(+), 2 deletions(-) diff --git a/testing/exim/APKBUILD b/testing/exim/APKBUILD index 609e115..7801fff 100644 --- a/testing/exim/APKBUILD +++ b/testing/exim/APKBUILD @@ -40,7 +40,6 @@ package() { cd $_builddir make DESTDIR=$pkgdir INSTALL_ARG="-no_symlink -no_chown exim" install install -D -m644 doc/exim.8 ${pkgdir}/usr/share/man/man8/exim.8 - cd build-Linux-* cd $pkgdir/usr/sbin mv exim-${pkgver}-* exim for i in mailq rmail rsmtp runq sendmail; do diff --git a/testing/exim/exim.logrotate b/testing/exim/exim.logrotate index b789eee..c923ed1 100644 --- a/testing/exim/exim.logrotate +++ b/testing/exim/exim.logrotate @@ -5,7 +5,7 @@ compress delaycompress notifempty - create 640 root mail + create 640 mail mail sharedscripts postrotate /etc/init.d/exim reload > /dev/null
Natanael Copa <ncopa@alpinelinux.org>Applying: testing/exim: fix some mistakes in previous commit error: patch failed: testing/exim/APKBUILD:40 error: testing/exim/APKBUILD: patch does not apply error: patch failed: testing/exim/exim.logrotate:5 error: testing/exim/exim.logrotate: patch does not apply Patch failed at 0001 testing/exim: fix some mistakes in previous commit does not apply. care to rebase this too? maybe merge it with the previous patch? -nc --- Unsubscribe: alpine-devel+unsubscribe@lists.alpinelinux.org Help: alpine-devel+help@lists.alpinelinux.org ---
-- 2.2.0 --- Unsubscribe: alpine-devel+unsubscribe@lists.alpinelinux.org Help: alpine-devel+help@lists.alpinelinux.org ---