i have coupe of software that only suports systemd or sysvinit..
the documentation about openrc in the wiki are pretty BAD!
consulting with geento users i have now some knowledg of the openrc but
ther's not enought info..
i want to install nxnomcahine that are only couple of binaries and some
source to compile modules (usb, printing etc)
Lenz McKAY Gerardo (PICCORO)
http://qgqlochekone.blogspot.com
El lun., 7 de ene. de 2019 a la(s) 13:45, Paul Zillmann (p.zillmann@h6g.de)
escribió:
> can you explain where you are hitting a bumper?>
i cited in my last lines "nx nomachine" do you note it?
> OpenRC should be very similar to SysVinit.>
well i thinnk to emulated the install like another sysvinit system and then
tune it the files..
but before i do the most logic and reasonable thin: ask!
so i ask and need, information about converting a sysv-rc installation (o
wors a systemd install) on a alpine to a openrc..
and please! the wiki are a crap! if the wiki are not usefully , get down
and use a git wiki based.. i have many experience with that!
why not a wiki lie the alpine page does? just markdown files and static
content generation!
>> - Paul>> Am 07.01.19 um 03:42 schrieb PICCORO McKAY Lenz:>> i have coupe of software that only suports systemd or sysvinit..>> the documentation about openrc in the wiki are pretty BAD!>> consulting with geento users i have now some knowledg of the openrc but> ther's not enought info..>> i want to install nxnomcahine that are only couple of binaries and some> source to compile modules (usb, printing etc)>> Lenz McKAY Gerardo (PICCORO)> http://qgqlochekone.blogspot.com>>
Hello Lenz,
can you explain where you are hitting a bumper?
OpenRC should be very similar to SysVinit.
- Paul
Am 07.01.19 um 03:42 schrieb PICCORO McKAY Lenz:
> i have coupe of software that only suports systemd or sysvinit..>> the documentation about openrc in the wiki are pretty BAD!>> consulting with geento users i have now some knowledg of the openrc > but ther's not enought info..>> i want to install nxnomcahine that are only couple of binaries and > some source to compile modules (usb, printing etc)>> Lenz McKAY Gerardo (PICCORO)> http://qgqlochekone.blogspot.com
no no paul...
i not want a tutorial.. I'll write it,
but i need some tips and info abour openrc, geeton have some usefull info .
scripts are like sysvinit..
but i taking about the specific info related to alpine. intall process of
nxmachines spected a debian or suse or redhat or centos... so i dont want
to try a want to get some tips before try.. due are very hard to isntall if
the system crap and i dont have enought memory for virtual machine
Lenz McKAY Gerardo (PICCORO)
http://qgqlochekone.blogspot.com
El lun., 7 de ene. de 2019 a la(s) 18:41, Paul Zillmann (p.zillmann@h6g.de)
escribió:
> Hello Lenz,>> Am 07.01.19 um 20:10 schrieb PICCORO McKAY Lenz:>> El lun., 7 de ene. de 2019 a la(s) 13:45, Paul Zillmann (p.zillmann@h6g.de)> escribió:>>> can you explain where you are hitting a bumper?>>>> i cited in my last lines "nx nomachine" do you note it?>>> Yes I've noted that - I still doesn't know what your exact question /> problem is other than "your documentation is sh*t - give me a tutorial how> I write init scripts">> Don't be rude and please take a moment to read through> http://www.catb.org/esr/faqs/smart-questions.html>> Thanks,>> - Paul>
Hello Lenz,
Am 07.01.19 um 20:10 schrieb PICCORO McKAY Lenz:
> El lun., 7 de ene. de 2019 a la(s) 13:45, Paul Zillmann > (p.zillmann@h6g.de <p.zillmann@h6g.de>) escribió:>> can you explain where you are hitting a bumper?>> i cited in my last lines "nx nomachine" do you note it?
Yes I've noted that - I still doesn't know what your exact question /
problem is other than "your documentation is sh*t - give me a tutorial
how I write init scripts"
Don't be rude and please take a moment to read through
http://www.catb.org/esr/faqs/smart-questions.html
Thanks,
- Paul
El mar., 8 de ene. de 2019 a la(s) 05:00, Martin Rusko (
martin.rusko@gmail.com) escribió:
> this is how it works here:>> * you can't command anyone about what they should do, people here owe> nothing to you>
command? so alpine does not have good support? like Debian, Centos?
> * people will help you, if you show steps what have you done and what> didn't work for you>
i'll detailed steps, i cited:
> > i not want a tutorial.. I'll write it, but i need some tips and info> abour openrc, geeton have some usefull info . scripts are like sysvinit..>
to install nx nomachine. When you start and you face some problem,
come back to tell us what that problem is. Thank you.
I started but its hard to see where are installed the files.. i tune up
some sysv-.init scripts but no luck, there's no libc6 problems due i have
already libc6-compat package, usb and printer modules compiles good, in any
inteligent process firts before install or do something people or
techinician must know the field of work, and later get try right?
> >> > but i taking about the specific info related to alpine. intall process> of nxmachines spected a debian or suse or redhat or centos... so i dont> want to try a want to get some tips before try.. due are very hard to> isntall if the system crap and i dont have enought memory for virtual> machine> >> >> > Lenz McKAY Gerardo (PICCORO)> > http://qgqlochekone.blogspot.com> >> >> > El lun., 7 de ene. de 2019 a la(s) 18:41, Paul Zillmann (> p.zillmann@h6g.de) escribió:> >>> >> Hello Lenz,> >>> >> Am 07.01.19 um 20:10 schrieb PICCORO McKAY Lenz:> >>> >> El lun., 7 de ene. de 2019 a la(s) 13:45, Paul Zillmann (> p.zillmann@h6g.de) escribió:> >>>> >>> can you explain where you are hitting a bumper?> >>> >>> >> i cited in my last lines "nx nomachine" do you note it?> >>> >>> >> Yes I've noted that - I still doesn't know what your exact question /> problem is other than "your documentation is sh*t - give me a tutorial how> I write init scripts"> >>> >> Don't be rude and please take a moment to read through> http://www.catb.org/esr/faqs/smart-questions.html> >>> >> Thanks,> >>> >> - Paul>
Ciao Lenz,
this is how it works here:
* you can't command anyone about what they should do, people here owe
nothing to you
* people will help you, if you show steps what have you done and what
didn't work for you
* if you do not cooperate, you will be ignored
What Paul tried to get from you, is to see what have you tried so far
and didn't work for you. To me it looks like you haven't even started
to install nx nomachine. When you start and you face some problem,
come back to tell us what that problem is. Thank you.
Best regards,
Martin
On Tue, Jan 8, 2019 at 2:42 AM PICCORO McKAY Lenz
<mckaygerhard@gmail.com> wrote:
>> no no paul...>> i not want a tutorial.. I'll write it,>> but i need some tips and info abour openrc, geeton have some usefull info . scripts are like sysvinit..>> but i taking about the specific info related to alpine. intall process of nxmachines spected a debian or suse or redhat or centos... so i dont want to try a want to get some tips before try.. due are very hard to isntall if the system crap and i dont have enought memory for virtual machine>>> Lenz McKAY Gerardo (PICCORO)> http://qgqlochekone.blogspot.com>>> El lun., 7 de ene. de 2019 a la(s) 18:41, Paul Zillmann (p.zillmann@h6g.de) escribió:>>>> Hello Lenz,>>>> Am 07.01.19 um 20:10 schrieb PICCORO McKAY Lenz:>>>> El lun., 7 de ene. de 2019 a la(s) 13:45, Paul Zillmann (p.zillmann@h6g.de) escribió:>>>>>> can you explain where you are hitting a bumper?>>>>>> i cited in my last lines "nx nomachine" do you note it?>>>>>> Yes I've noted that - I still doesn't know what your exact question / problem is other than "your documentation is sh*t - give me a tutorial how I write init scripts">>>> Don't be rude and please take a moment to read through http://www.catb.org/esr/faqs/smart-questions.html>>>> Thanks,>>>> - Paul
---
Unsubscribe: alpine-user+unsubscribe@lists.alpinelinux.org
Help: alpine-user+help@lists.alpinelinux.org
---
>> you can't command anyone about what they should do, people here owe
nothing to you
> command? so alpine does not have good support? like Debian, Centos?
What kind of support do you mean? Alpine is basically a community driven
project. If you're looking for a commercial support, you can ask e.g.
me; my price is 50 USD/hour.
If you're looking for a community support for free, you have to change
your attitude.
Jakub
On 1/8/19 1:33 PM, PICCORO McKAY Lenz wrote:
> El mar., 8 de ene. de 2019 a la(s) 05:00, Martin Rusko> (martin.rusko@gmail.com <martin.rusko@gmail.com>) escribió:> > this is how it works here:> > > > * you can't command anyone about what they should do, people here owe> nothing to you> > command? so alpine does not have good support? like Debian, Centos?> > > * people will help you, if you show steps what have you done and what> didn't work for you> > > i'll detailed steps, i cited:> > > i not want a tutorial.. I'll write it, but i need some tips and> info abour openrc, geeton have some usefull info . scripts are like> sysvinit..> > > > > to install nx nomachine. When you start and you face some problem,> come back to tell us what that problem is. Thank you.> > I started but its hard to see where are installed the files.. i tune up> some sysv-.init scripts but no luck, there's no libc6 problems due i> have already libc6-compat package, usb and printer modules compiles> good, in any inteligent process firts before install or do something> people or techinician must know the field of work, and later get try right?> > > > >> > but i taking about the specific info related to alpine. intall> process of nxmachines spected a debian or suse or redhat or> centos... so i dont want to try a want to get some tips before try..> due are very hard to isntall if the system crap and i dont have> enought memory for virtual machine> >> >> > Lenz McKAY Gerardo (PICCORO)> > http://qgqlochekone.blogspot.com> >> >> > El lun., 7 de ene. de 2019 a la(s) 18:41, Paul Zillmann> (p.zillmann@h6g.de <p.zillmann@h6g.de>) escribió:> >>> >> Hello Lenz,> >>> >> Am 07.01.19 um 20:10 schrieb PICCORO McKAY Lenz:> >>> >> El lun., 7 de ene. de 2019 a la(s) 13:45, Paul Zillmann> (p.zillmann@h6g.de <p.zillmann@h6g.de>) escribió:> >>>> >>> can you explain where you are hitting a bumper?> >>> >>> >> i cited in my last lines "nx nomachine" do you note it?> >>> >>> >> Yes I've noted that - I still doesn't know what your exact> question / problem is other than "your documentation is sh*t - give> me a tutorial how I write init scripts"> >>> >> Don't be rude and please take a moment to read through> http://www.catb.org/esr/faqs/smart-questions.html> >>> >> Thanks,> >>> >> - Paul>
---
Unsubscribe: alpine-user+unsubscribe@lists.alpinelinux.org
Help: alpine-user+help@lists.alpinelinux.org
---
El jue., 10 de ene. de 2019 a la(s) 07:29, Natanael Copa (
ncopa@alpinelinux.org) escribió:
> We don't support sysvinit or systemd nor precompiled applications that> requires libc6, like Debian and Centos does. Sorry.>
Hi Natan, i already know that alpine uses Openrc,
please if you read firts mails understand the context of my topic..
i try to give setup to some tirth-party apps under alpine, currently
there's
no good remote apps on linux agains teamviewer but recently exists anydesk
and nomachine,
so then, i try to give some adaptations to nomachine scripts
but i not found many technical documentations easy to understand about
openrc
ironically geento have more good reception rather that list..
>> Maybe you can ask nx nomachine community to help you?> https://www.nomachine.com/support>> really? well the tipicall response.. "use XXX OS" we can make the
difference right?
> -nc>